|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-14-2017, 05:28 PM
|
#1 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Otsenre pays it forward
Last summer, I picked up a set of trailing arms from him at a very fair price. They have now been refurbished, and live on under Grandpa's truck.
Pic #1 Operate until failure, replace as necessary #2 arms separated, cleaned, reassembled with new upper/lower plates cut on a CNC-plasma machine, and sealed up. #3 Ready for another 50 years' service. For my part of the pay it forward, I'll provide the drawings that were used to drive the CNC if you want to make your own 3/4T plates. I have them in AutoCAD and PDF. Loren
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 Last edited by hounddogs!; 02-14-2017 at 08:01 PM. |
|
|
|
02-14-2017, 06:00 PM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,353
|
Re: Otsenre pays it forward
-
Good deal. That's what makes this board so great.... I would take them in PDF. I am going to change my '67 Dually over to coil springs and I want to beef up a set of arms.... I will PM my e-mail address. Thanks, LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
02-14-2017, 07:57 PM
|
#3 |
|
Registered User
Join Date: Oct 2006
Location: Orland Park Il
Posts: 2,041
|
Re: Otsenre pays it forward
That's great, I have a pair that need some work. Did you use 1/8" or 3/16"?
__________________
68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback |
|
|
|
|
02-14-2017, 10:42 PM
|
#4 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Re: Otsenre pays it forward
Right in the middle. 10 gauge sheet / 0.1345"
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
|
|
|
|
02-14-2017, 11:33 PM
|
#5 |
|
All about them K’s
 
Join Date: Jun 2014
Location: Farmington, New Mexico
Posts: 6,265
|
Re: Otsenre pays it forward
Nice work, Ernesto is a great guy to deal with!
__________________
Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 315/75/16's ‘87 IROC-Z all original 50K mile survivor TPI 305 IROC Blue ‘10 Camaro 2SS/RS Aqua Blue Metallic #93 -version 2.0 
|
|
|
|
|
02-15-2017, 10:41 AM
|
#6 |
|
Restoring it $200 at a time...
Join Date: Aug 2008
Location: NE Kansas
Posts: 886
|
Re: Otsenre pays it forward
Here's the PDF. I'll need an email addy if you want AutoCAD2013 dwg or dxf.
Loren
__________________
Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0 |
|
|
|
|
02-15-2017, 11:39 AM
|
#7 |
|
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,353
|
Re: Otsenre pays it forward
-
Saved, Thanks. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
02-15-2017, 01:31 PM
|
#8 | |
|
Registered User
Join Date: Oct 2006
Location: Orland Park Il
Posts: 2,041
|
Re: Otsenre pays it forward
Quote:
__________________
68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback |
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
