MI Wire Harness pig tails and cuts

[DaHos]

Originally Posted by SaltyC20

Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around?

Sorry I do not, they all seem to be melted.......

[1968aj]

do you have the plug in that goes from the intermediate rear harness that plugs into the taillight harness?

[ck5566]

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

[DaHos]

Originally Posted by 1968aj

do you have the plug in that goes from the intermediate rear harness that plugs into the taillight harness?

Got one, $8 shipped

Originally Posted by ck5566

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

Let me take a look for you......

[1968aj]

great!! I will take it pm sent

[ck5566]

Originally Posted by DaHos

Got one, $8 shipped



Let me take a look for you......

If you need more info on my truck for the proper fitment LMK

[1968aj]

Originally Posted by DaHos

Got one, $8 shipped



Let me take a look for you......

paypal sent from Sidney. sent$10. this is the only part keeping me from driving this truck I have been working on for 2 years. THANKS

[ck5566]

TTT Free Bump

[1968aj]

got the plug today THANKS

[ck5566]

Originally Posted by ck5566

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

Hay Rip Van Winkle are you there. LOL

You said you would take a look for it 8 days ago, hows it going?

[DaHos]

Originally Posted by ck5566

Hay Rip Van Winkle are you there. LOL

You said you would take a look for it 8 days ago, hows it going?

Sorry about that, thought I replied.......oops

I do have some BUT they are all 69-72 style boxes........

[ck5566]

Originally Posted by DaHos

Sorry about that, thought I replied.......oops

I do have some BUT they are all 69-72 style boxes........

OK, please keep me in mind for one, thanks

[kda2000]

Do you have any backup light connectors (the light side the connector), single wire that plugs into the rear wiring harness -- PO cut them off and blue clipped them together. I've replaced the rear wiring harness for other reasons, and would like to put the correct connector on the back up lights, just need the connector and a few inches of the wire -- thanks for your answer. (BTW - 68 stepside, but I think the fleet uses the same connector). Looking for 2 --- Ken

[Tuff Gong]

Any chance you have cuts from the wiper blade harnesses. I need both sides. I will try to post pictures.

[Tuff Gong]

This part plus it's partner

[f.flujan]

Front fender clearance light pigtail
Harness for cluster gauge http://67-72chevytrucks.com/vboard/a...1&d=1388784241
Heater lamp pigtail
Shipped to 92584
Thanks