Crash !!! - Need A 12 Bolt Rear End

[LUV2XCLR8]

WELL, FIRST OFF I'M OK, HAD TO RESTART MY HEART THOUGH.
WENT TO SUPER CHEVY IN MEMPHIS THIS WEEKEND AND HAD A
FABULOUS TIME, GOT ALMOST $1000.00 WORTH OF PARTS FROM
TIM CHRISTIAN FOR MY BLAZER PROJECT AND HAD SEVERAL #'S
TAKEN DOWN ON POSSIBLE BUYERS FOR MY 67 AND 70 P/U'S. I
SPENT MOST OF THE DAY WITH BOARD MEMBERS SHAN, DEBBIE,
TIM AND HIS GREAT FAMILY AND LEARNED ALOT ABOUT THEM. I
GOT HOME THAT EVENING ( DROVE 67 TO & FROM SHOW 200MI. )
AND SOMEONE CALLED ABOUT THE 67, THEY CAME AND LOOKED
AND DROVE IT, I ASKED IF THEY ROMPED ON IT ANY? HE SAID HE
WAS SCARED TO SO I VOLUNTEERED TO GIVE HIM A REAL RIDE.
ON OUR WAY BACK ( AFTER LOTS OF BURNOUTS AND SIDE WAYS
DRIVING ) WE WENT DOWN THIS LONG STRETCH AND I OPENED
HER UP TO ABOUT 120 MPH, ABOUT THE TIME I WENT TO SLOW
DOWN I SNAPPED THE DRIVER'S SIDE AXLE AND LOST IT, LOTS A
SPARKS A FLYING AND NO BRAKES, I CONTROLLED HER TO A STOP
$85 DOLLARS LATER ( WRECKER BILL ) WE RETURNED BACK TO MY
HOUSE AND BELEIVE IT OR NOT HE IS STILL INTERESTED IN HER.

I NEED A 12 BOLT TRAILING ARM REAR END COMPLETE FROM A
BOARD MEMBER CLOSE TO WEST TN. AREA. GEAR SELECTION IS
NOT A ISSUE TO ME. I ALSO NEED 1 U-BOLT FOR THE DRIVER'S
SIDE SINCE MINE HAS BEEN GROUND DOWN TO ALMOST ZERO.
PLEASE HELP ME OUT IF YOU CAN, I NEED ONE AS CHEAP AS I
CAN GET IT SINCE I'M SELLING TRUCK AND JUST WANT IT FIXED.
ALL HELP IS GREATLY APPRECIATED, I'M JUST A VERY LUCKY GUY.

[Longhorn Man]

Can't help, but wow, you are a lucky man.
TTT

[stelth2002]

And what does this 67 have in it for a drivetrain?

[LUV2XCLR8]

0.30 SMALL BLOCK 400 CHEVY ( STOCK HEADS, CAM & GUTS )
750 MANUAL CHOKE EDELBROCK CARB. / EDELBROCK VICTOR
JUNIOR SINGLE PLANE INTAKE, PROFORM BILLET H.E.I. DIST.
ACCELL 8.8 WIRES / VELOCITY STACK INSTEAD OF AIR CLEANR
FLOTECH HEADERS / H-PIPE / FLOWMASTERS / 4" TURNDOWNS.
TRANSMISSION IS STOCK ALUMINUM CASE POWERGLIDE 2 SPD.
BEST RUN WAS 9.556 IN THE 1/8 MILE ON STREET TIRES.

[LUV2XCLR8]

bump

[billsbowtie]

i asume it is a 6 lug i have a 6 lug frame i dont no if it has a 12 bolt or 10 bolt rear it is coil springi could check tomarrow $50.00 for the hole thing but i am 400 mile east of you thanks bill

[smitty62]

How close is close enough? I've got a good 6-lug---12 bolt 3:73 open---coil sprung thats just been sandblasted near Statesville, NC. I would replace seals, brakes, etc. before using, tho. $50 U-pick-up. Or will trade for a pair of 16 inch 8-lug 4wd wheels and tires good enough for a trailer.

[LUV2XCLR8]

YES, IT IS 6 LUG, NOT SURE WHERE YOU ARE AT. I MIGHT HAVE
MY FREIGHT BOYS RUNNING YOUR WAY, LET ME CHECK ROUTES.

SMITTY, I WILL CHECK ON ROUTES NEAR YOU ALSO.

[billsbowtie]

my zip is 24281

[smitty62]

Just get on I-40 and go East to exit 170

[LUV2XCLR8]

THE FREIGHT CO. I'M GOOD FRIENDS WITH GOES FROM HEATH,
OH. TO GREENWOOD, SC. ONCE A WEEK. HOWEVER I'M NOT SO
SURE THOSE GUYS ALWAYS GET THERE THE SAME WAY, WILL BE
ABLE TO CHECK ROUTES WHEN I GET TO WORK TOMORROW.

[stateamind]

I've got a 67' six lug rear, 3:08(7?) open diff. $50 as well. I'm abt 30 miles west of Nashville.

[LUV2XCLR8]

STATEAMIND,

WHAT DOES YOUR'S NEED TO BE USED?

IS IT COMPLETE? ( BRAKES / AXLES )

WHAT ABOUT ONE U-BOLT?

HOW SOON U NEED TO SELL IT?

NEED A COUPLE OF WEEKS.

WRECKER BILL $85.00

WIFE IS PISSED RIGHT NOW

[402Bowtie]

It's not mine......here's the site:
http://cgi.msn.ebay.com/ebaymotors/w...category=10076

[highboy_04]

i've got one too but im pretty far away.

[stateamind]

It is complete, from drum to drum. Still has the wheels attached actually. I went with five lug on reassembly. I've got a 68 here as well with coil rear. That ones still under the truck. Not sure what gear it has. I'm in no hurry to sell. As for the U-bolt, if you can get one off the 68, you can have it with the rear. Those things are a b@tch to get off after 30 some odd years. Then again, i may have a couple laying around. Will have to look.

[LUV2XCLR8]

WIFEY IS PISSED OFF RIGHT NOW, I WILL E-MAIL YOU BACK IN
A COUPLE OF WEEKS, DICKSON IS ABOUT HOUR & HALF AWAY.

[LUV2XCLR8]

STATEAMIND, ANYTHING U NEED? COULD TRADE YA.

[stateamind]

Always looking for some good front fenders and a good rad support for a 67. You have any pics of your trucks for sale. My bro is possibly lookin for a good project.

[LUV2XCLR8]

HIT "www" BUTTON ON BOTTOM OF MY THREADS FOR MY PIC'S

I'D MAKE HIM A DEAL, NOT SURE HE WOULD BE INTERESTED IN
THOSE 2 THOUGH, MOST OF THE BOARD HAS RIPPED ON PRICE
AND QUALITY OF WHAT IS PICTURED. ( EXCEPT CA. / CANADA )

[Blue_71]

i dont have a complete axle, but i do have a couple 6 lug axle shafts i could sell you cheap

[LUV2XCLR8]

THANKS BLUE_71, BUT MY AXLES WERE WELDED IN AND WHEN
SHE BROKE IT ALL WAS TRASHED, THANKS FOR THE OFFER.