LWB vs SWB The last 12in of frame.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewittca · 01-23-2018, 02:01 PM

As far as I know, the two frames are the same out back except the long frame is 8" longer on the ends. I think what you would have to do is cut 8" straight off the back of the LWB frame, and then from there you could use 12" from the long frame and splice it into the short frame.

Arnoldaviation14 · 01-23-2018, 02:52 PM

Quote:

Originally Posted by hewittca

As far as I know, the two frames are the same out back except the long frame is 8" longer on the ends. I think what you would have to do is cut 8" straight off the back of the LWB frame, and then from there you could use 12" from the long frame and splice it into the short frame.

I just need to find one and see if i can cut and splice in the last little bit on my frame.. When they welded the frame they destroyed it on the end..

01-23-2018, 02:01 PM	#1
hewittca Registered User Join Date: Jun 2014 Location: Mocksville, NC Posts: 1,741	Re: LWB vs SWB The last 12in of frame.. As far as I know, the two frames are the same out back except the long frame is 8" longer on the ends. I think what you would have to do is cut 8" straight off the back of the LWB frame, and then from there you could use 12" from the long frame and splice it into the short frame. __________________ Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.