The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-21-2017, 03:41 PM   #1
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
1966 C10 LB 2wd 283 4spd build

Time to start my build thread..
Bought this 1966 C10 LB 283 4sp PS PB Custom model
Pretty much how it was from the factory. Built in Canada
Bought it from the family of the original owner. It has 107000 miles on it.
Here is a picture of when I got it home, and also a picture of it cab-off before work on it.
Attached Images
  
66C10LB is offline   Reply With Quote
Old 12-22-2017, 12:36 AM   #2
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: 1966 C10 LB 2wd 283 4spd build

That looks like a clean and straight truck

What are your plans for it?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-22-2017, 01:38 AM   #3
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Thanks CaptainFab
Ya, it's decent, but requires the usual rust repair...floor pan, front and rear outer cab supports, pillar btms front and back, inner rockers, outer rockers, some other small pieces to be fabricated. I am working on the passenger side first.

I have two trains of thought about what I would like to end up with...1)completely stock including the colours saddle/fawn/white etc. or 2) mostly stock but choose red in and out and upgrade to fuel in rear, dual master, collapsible steering column.

Thoughts?
Attached Images
     
66C10LB is offline   Reply With Quote
Old 12-22-2017, 01:55 PM   #4
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: 1966 C10 LB 2wd 283 4spd build

Jumped right in, I like that.
Following along
Bomp is offline   Reply With Quote
Old 12-23-2017, 02:07 AM   #5
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: 1966 C10 LB 2wd 283 4spd build

Just build your truck the way you want it to be so you can enjoy it to the fullest.

Quote:
Originally Posted by 66C10LB View Post
I have two trains of thought about what I would like to end up with...1)completely stock including the colours saddle/fawn/white etc. or 2) mostly stock but choose red in and out and upgrade to fuel in rear, dual master, collapsible steering column.

Thoughts?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-25-2017, 04:08 AM   #6
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Some details (bit out of sequence). Here is the steering wheel repair, kind of close to finished. It's interesting that my 1966 Canadian built truck came with this style of steering wheel. Maybe this is not the original, or maybe it is the original and is this style because this 1966 truck was made in Canada late in 1965?
Attached Images
  
66C10LB is offline   Reply With Quote
Old 01-04-2018, 08:20 PM   #7
Lobotie
Registered User
 
Lobotie's Avatar
 
Join Date: Jan 2018
Location: Clovis Ca
Posts: 8
Re: 1966 C10 LB 2wd 283 4spd build

Looking good so far
Following
Lobotie is offline   Reply With Quote
Old 07-12-2018, 01:02 PM   #8
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

For the bottom of the front pillar post repair, I decided to tack a small, 1/4 inch wide strip of 16g to the inside so that I would have some backing and be able to turn the heat up on the weld to ensure strength...
Attached Images
  

Last edited by 66C10LB; 07-12-2018 at 01:06 PM. Reason: Wrong picture was uploaded
66C10LB is offline   Reply With Quote
Old 07-12-2018, 01:22 PM   #9
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Finally, passenger side pretty much done. A number of adjustments were needed to the outer rocker and the cab corner to make them work.
Attached Images
     
66C10LB is offline   Reply With Quote
Old 07-17-2018, 01:00 PM   #10
jimmythompson1964
Registered User
 
jimmythompson1964's Avatar
 
Join Date: Jan 2012
Location: Greeneville TN
Posts: 251
Re: 1966 C10 LB 2wd 283 4spd build

Looks like you been there and done that before....good work!
jimmythompson1964 is offline   Reply With Quote
Old 07-21-2018, 10:51 PM   #11
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by jimmythompson1964 View Post
Looks like you been there and done that before....good work!
Thanks Jimmy! I'm actually quite a newby that this sort of thing, but enjoying the journey. It has been a bit slow, but getting there.
66C10LB is offline   Reply With Quote
Old 07-23-2018, 08:47 AM   #12
jimmythompson1964
Registered User
 
jimmythompson1964's Avatar
 
Join Date: Jan 2012
Location: Greeneville TN
Posts: 251
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by 66C10LB View Post
Thanks Jimmy! I'm actually quite a newby that this sort of thing, but enjoying the journey. It has been a bit slow, but getting there.
I did not see any bracing, did you test fit your door before you final welded your rocker in place? With all of the metal cut out it can move on so you may want to test fit it now make sure everything is still in line. If this is your fist project you are doing great, and you found the right place to read and learn from, the guys on this site have been there and done that. People on this forum are very knowledgeable and will help you through the learning process. Looks like you are having fun and getting it done.
jimmythompson1964 is offline   Reply With Quote
Old 07-30-2018, 10:38 PM   #13
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by jimmythompson1964 View Post
I did not see any bracing, did you test fit your door before you final welded your rocker in place? With all of the metal cut out it can move on so you may want to test fit it now make sure everything is still in line. If this is your fist project you are doing great, and you found the right place to read and learn from, the guys on this site have been there and done that. People on this forum are very knowledgeable and will help you through the learning process. Looks like you are having fun and getting it done.
Thanks Jimmy. Yes I am new to this but enjoying. I did test fit the door and the front fender to the outer rocker several times in the process so I think it is very close. There were adjustments needed (slits in the outer rocker to fit over the pillar bottoms. For the drivers side I am cross bracing in order to speed up the process and add a level of comfort (less worry about things moving).
66C10LB is offline   Reply With Quote
Old 07-31-2018, 05:43 PM   #14
68Gold/white
Registered User
 
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,263
Re: 1966 C10 LB 2wd 283 4spd build

I like the idea of a stock build on this pickup.

A good friend of mine had a cool 66, he sold it and I didn't know it at the time. man I regret that...........

His was originally the same color as yours.
Carry On!!!
68Gold/white is offline   Reply With Quote
Old 08-01-2018, 02:50 PM   #15
okndn
Registered User
 
Join Date: Mar 2014
Location: Skiatook, OK
Posts: 33
Re: 1966 C10 LB 2wd 283 4spd build

Looking good
okndn is offline   Reply With Quote
Old 08-24-2020, 03:35 PM   #16
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Getting close to finishing the second side of the cab! Of course alterations had to be made to the pieces that I ordered. Here are the alterations to the rocker and the rear brace. Anyone else finding similar alterations had to be made?
Attached Images
  
66C10LB is offline   Reply With Quote
Old 08-24-2020, 04:48 PM   #17
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Managed to make a replacement for the bottom flange at the bottom of the back of the cab.
Attached Images
 
66C10LB is offline   Reply With Quote
Old 08-24-2020, 10:29 PM   #18
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: 1966 C10 LB 2wd 283 4spd build

All aftermarket body patch panels and most body parts must be reworked to fit correctly.

Nice work on the lower rear cab panel
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-24-2020, 11:04 PM   #19
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Indeed, Captain Fab, pretty much every panel.

Took a while to decide how to achieve those curved flanges on the lower centre rear of the cab.
66C10LB is offline   Reply With Quote
Old 08-25-2020, 11:10 AM   #20
jrusher
Registered User
 
Join Date: Mar 2017
Location: Edmonton
Posts: 366
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by 66C10LB View Post
Managed to make a replacement for the bottom flange at the bottom of the back of the cab.
Nice work! What did you use to bend and shape those pieces ?
jrusher is offline   Reply With Quote
Old 08-25-2020, 11:17 AM   #21
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: 1966 C10 LB 2wd 283 4spd build

Wow, nice work on that cab bottom piece.
The Rocknrod is offline   Reply With Quote
Old 08-25-2020, 12:24 PM   #22
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by jrusher View Post
Nice work! What did you use to bend and shape those pieces ?
Jrusher, I used a bead roller with a combination of flanging dies, tipping dies, and back to back flat dies for smoothing. It was a fairly low cost bead roller but did the job.
66C10LB is offline   Reply With Quote
Old 08-25-2020, 12:25 PM   #23
66C10LB
Registered User
 
Join Date: Jul 2016
Location: West Kelowna, BC, Canada
Posts: 204
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by The Rocknrod View Post
Wow, nice work on that cab bottom piece.
Thanks!
66C10LB is offline   Reply With Quote
Old 08-28-2020, 10:04 AM   #24
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,891
Re: 1966 C10 LB 2wd 283 4spd build

Quote:
Originally Posted by The Rocknrod View Post
Wow, nice work on that cab bottom piece.
x2. Very nice!
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 08-28-2020, 10:07 AM   #25
88Stanger
Registered User
 
88Stanger's Avatar
 
Join Date: Mar 2015
Location: Washington State
Posts: 1,644
Re: 1966 C10 LB 2wd 283 4spd build

nice work so far!!
88Stanger is offline   Reply With Quote
Reply

Bookmarks

Tags
1966, 283, c10, canada, saddle

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com