Cup Holders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

whatleyr · 08-23-2018, 05:53 PM

Hey guys. After spilling my R44 Coke this morning I'm thinking about cup holders. Any suggestions that doesn't look modern?

bill3rail · 08-23-2018, 05:56 PM

Carry only a sealed water bottle!

Shinysideup · 08-23-2018, 06:10 PM

Roll of duct tape on the floor works.

bill3rail · 08-23-2018, 06:43 PM

Quote:

Originally Posted by Shinysideup

Roll of duct tape on the floor works.

Damn, it is true, Duct Tape does everything!

RustyBucket · 08-23-2018, 06:55 PM

holds yer cup, rests yer elbow, holds yer stuff......

ZEKE68 · 08-23-2018, 08:37 PM

There are venders that sale two hole cup holders that slip into your ash tray slot, but they cover part of your radio space. I took one of them and screwed it to a 2 by 4 which I anchored under the middle of my seat so it sticks just in front of the seat above the hump.

ZEKE68 · 08-23-2018, 08:43 PM

Cup holder, moves with the seat.

**Boog** · 08-24-2018, 05:20 AM

Two 20 oz instead?

68is4me · 08-24-2018, 09:44 AM

I am going to use a cup holder off an 99-06 gm pickup with a bench seat. It has a nice bracket that will bolt to the underside frame on the 68 and sit right in the middle. I am also going to paint it to match the interior. This is not the best picture but is really close.

demian5 · 08-24-2018, 11:52 AM

I have a cheap plastic autozone cup holder, knick knack console on the floor.

**special-K** · 08-25-2018, 06:46 AM

I don't even know what an R44 Coke is.

**Boog** · 08-25-2018, 06:53 AM

Good morning Tim. That would be a "Route 44" drink from Sonic driveins. It's their gondo huge one.

bill3rail · 08-25-2018, 08:16 AM

**special-K** · 08-25-2018, 08:34 AM

Quote:

Originally Posted by Boog

Good morning Tim. That would be a "Route 44" drink from Sonic driveins. It's their gondo huge one.

Over abbreviated, huh? I would have known if it was rt44, or had a clue anyway. Rt stands for route, r stands for any word that starts with r

These humongous buckets of soda pop they sell these days don't work well with cup holders anyway. Between the legs or have your honey hold it

**jabborabbo** · 08-25-2018, 03:44 PM

RustyBucket posted a pic of what you need...I started out using the plastic window hangers...the complete absence of cubby holes in my ‘67 drove me to the console solution. You do need a center seat belt (or maybe just rope) to hold it in place, though....

Moose Monkey · 08-26-2018, 09:14 PM

This is mine.

cornerstone · 08-26-2018, 11:35 PM

Quote:

Originally Posted by Moose Monkey

This is mine.

This is one of a kind. Ingenuity meets practical. Very cool!

RustyBucket · 08-27-2018, 12:43 AM

Quote:

Originally Posted by jabborabbo

RustyBucket posted a pic of what you need...I started out using the plastic window hangers...the complete absence of cubby holes in my ‘67 drove me to the console solution. You do need a center seat belt (or maybe just rope) to hold it in place, though....

https://www.homedepot.com/p/Outland-...1-09/205971395
$57 cheap. not fastened to anything but I haven't managed to sling it off the seat yet. Usually have my elbow on it. It was gray and I painted it blue with vinyl spray. Had a 44oz. Polar Pop in it today.... any size $.69

Benjamin · 08-27-2018, 03:25 PM

Quote:

Originally Posted by Moose Monkey

This is mine.

That's awesome!

Benjamin · 08-27-2018, 03:29 PM

I mounted an old coffee can to the hump. Put it a little ways behind the shifter, checked to make sure I could still get my coffee in and out when I'm in second and fourth gears, and tacked it in place with a few #8 self-drilling screws.

Tork? · 08-27-2018, 05:02 PM

check out Atomic Armadillo Metal Fab. Handmade in Wisconsin with multiple mounting options.

DASH MOUNT

SEAT MOUNT

DOOR MOUNT

Metaldoc · 08-27-2018, 09:59 PM

Works well and bolted to the seat. Wrapped in vinyl.

Andy4639 · 08-28-2018, 09:34 AM

I have several in my 71. And non in the 67 Ramp truck!

This one I use for everything but a cup holder.

08-23-2018, 05:53 PM	#1
whatleyr Registered User Join Date: Mar 2015 Location: Lone Star, TX Posts: 26	Cup Holders Hey guys. After spilling my R44 Coke this morning I'm thinking about cup holders. Any suggestions that doesn't look modern?

08-23-2018, 05:56 PM	#2
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: Cup Holders Carry only a sealed water bottle! __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

08-23-2018, 06:55 PM	#5
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: Cup Holders holds yer cup, rests yer elbow, holds yer stuff...... Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

08-23-2018, 08:37 PM	#6
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: Cup Holders There are venders that sale two hole cup holders that slip into your ash tray slot, but they cover part of your radio space. I took one of them and screwed it to a 2 by 4 which I anchored under the middle of my seat so it sticks just in front of the seat above the hump. __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

08-23-2018, 08:43 PM	#7
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: Cup Holders Cup holder, moves with the seat. Attached Images __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

08-24-2018, 05:20 AM	#8
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,057	Re: Cup Holders Two 20 oz instead? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-24-2018, 09:44 AM	#9
68is4me Registered User Join Date: Jun 2014 Location: lakefield,mn Posts: 566	Re: Cup Holders I am going to use a cup holder off an 99-06 gm pickup with a bench seat. It has a nice bracket that will bolt to the underside frame on the 68 and sit right in the middle. I am also going to paint it to match the interior. This is not the best picture but is really close. Attached Images __________________ 68 c10 swb stepper 68 c10 swb stepper 67 c10 lwb 06 gmc duramax

08-24-2018, 11:52 AM	#10
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: Cup Holders I have a cheap plastic autozone cup holder, knick knack console on the floor. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

08-25-2018, 06:46 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Cup Holders I don't even know what an R44 Coke is. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-25-2018, 06:53 AM	#12
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,057	Re: Cup Holders Good morning Tim. That would be a "Route 44" drink from Sonic driveins. It's their gondo huge one. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

08-25-2018, 08:16 AM	#13
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: Cup Holders __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

08-25-2018, 03:44 PM	#15
jabborabbo Senior Member Join Date: Apr 2013 Location: Podunk, Texas Posts: 742	Re: Cup Holders RustyBucket posted a pic of what you need...I started out using the plastic window hangers...the complete absence of cubby holes in my ‘67 drove me to the console solution. You do need a center seat belt (or maybe just rope) to hold it in place, though.... __________________ "It is hard to search for a black cat in a dark room, particularly if it is not there. Especially if this cat is smart, brave, and polite." Sergei Shoigu, Russian Minister of Defense

08-26-2018, 09:14 PM	#16
Moose Monkey Registered User Join Date: Sep 2016 Location: south jersey Posts: 118	Re: Cup Holders This is mine. Attached Images __________________ 70 c 10 daily Rider

08-27-2018, 03:29 PM	#20
Benjamin Registered User Join Date: Jul 2012 Location: New Orleans, LA Posts: 184	Re: Cup Holders I mounted an old coffee can to the hump. Put it a little ways behind the shifter, checked to make sure I could still get my coffee in and out when I'm in second and fourth gears, and tacked it in place with a few #8 self-drilling screws. __________________ 1972 K10, 350/SM465/NP205, 4 inch lift, 35x12.50s on 15x10 wheels 1976 K20 crew cab, 350/Ranger/SM465/NP205

08-27-2018, 05:02 PM	#21
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 217	Re: Cup Holders check out Atomic Armadillo Metal Fab. Handmade in Wisconsin with multiple mounting options. DASH MOUNT SEAT MOUNT DOOR MOUNT



Register or Log In To remove these advertisements.

08-27-2018, 09:59 PM	#22
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: Cup Holders Works well and bolted to the seat. Wrapped in vinyl. Attached Images __________________ Do it, Do it right, Do it right the first time

08-28-2018, 09:34 AM	#23
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Cup Holders I have several in my 71. And non in the 67 Ramp truck! This one I use for everything but a cup holder. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.