MO "It's a peach",, 69 C10 part out. - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 08-24-2018, 08:15 PM

Quote:

Originally Posted by old51sedan

Money sent for air cleaner. Thanks, Donn

It went out today. Thanks, Fred.

**specialtyretail** · 08-25-2018, 11:25 AM

Quote:

Originally Posted by Sleipnir

How are the door handles? Really looking for just the drivers side

The door handles are,,, just junk... Thanks, Fred.

**specialtyretail** · 08-29-2018, 07:15 PM

Hood,,,, has rust in the drivers side leading corner. If you need it and can come get it,,, FREE..... Sorry,, I cannot hold it till you think you might be able to maybe get somewhere near here sometime in the future if you get around to it. If you can use it, come get it and it is yours. Thanks, Fred.

palallin · 08-30-2018, 10:03 AM

Can't tell from the pics: is it a longstep or short? If long, does it have the driver's side fender cut-out?

Thanks.

**specialtyretail** · 08-30-2018, 11:05 AM

Quote:

Originally Posted by palallin

Can't tell from the pics: is it a longstep or short? If long, does it have the driver's side fender cut-out?

Thanks.

Long bed, no cut out. Aren't the fenders the same on long and short beds? Thanks, Fred.

palallin · 08-30-2018, 11:22 AM

Quote:

Originally Posted by specialtyretail

Long bed, no cut out. Aren't the fenders the same on long and short beds? Thanks, Fred.

They are the same without the cut-out, but the cut-out is different, long and short. I need the long. Too bad.

Thanks for the response. If you come across one . . .

In the meantime, I'll keep looking.

SimonTek · 08-30-2018, 01:35 PM

I'm curious, is that a long bed step side?

**specialtyretail** · 08-30-2018, 02:11 PM

Quote:

Originally Posted by SimonTek

I'm curious, is that a long bed step side?

Yes it is....

OutlawM92 · 09-01-2018, 04:38 AM

Does the cluster have a tach?

**specialtyretail** · 09-01-2018, 11:57 AM

Quote:

Originally Posted by OutlawM92

Does the cluster have a tach?

No sir, sorry it does not. Thanks, Fred.

**specialtyretail** · 09-02-2018, 03:22 PM

About to go and be with it's ancestors....

Castle09 · 09-04-2018, 12:44 AM

Was Leonard out? I’m still hoping to get a piece of that 🍑. Would you be able to take a sawzall to the middle of the pillar on both sides and through the roof. I need to replace the portion where the top of the door meets the cab. Pass side
Thanks

Leonard1 · 09-04-2018, 07:15 AM

I'm definately out now, based on that last picture...

**specialtyretail** · 09-04-2018, 03:24 PM

Quote:

Originally Posted by Leonard1

I'm definately out now, based on that last picture...

Do not fret,,,, I bought two yesterday. One was just delivered, the other one I will get as quick as I can.

Quote:

Originally Posted by Castle09

Was Leonard out? I’m still hoping to get a piece of that 🍑. Would you be able to take a sawzall to the middle of the pillar on both sides and through the roof. I need to replace the portion where the top of the door meets the cab. Pass side
Thanks

I has already left the building....

Leonard1 · 09-04-2018, 08:41 PM

Quote:

Originally Posted by specialtyretail

Do not fret,,,, I bought two yesterday. One was just delivered, the other one I will get as quick as I can.

Awesome! Pics, I need pics...

**1970 CST Short Wide** · 09-06-2018, 02:04 PM

Is the Clutch Pedal available?? If so how much shipped to 94565.
Don’t need brake assembly or pedal. JUST Clutch pedal
Thanks
Steve

**specialtyretail** · 09-06-2018, 04:35 PM

Quote:

Originally Posted by 1970 CST Short Wide

Is the Clutch Pedal available?? If so how much shipped to 94565.
Don’t need brake assembly or pedal. JUST Clutch pedal
Thanks
Steve

Hey Steve,,, sorry, already sold. Thanks, Fred.

**1970 CST Short Wide** · 09-06-2018, 08:55 PM

Quote:

Originally Posted by specialtyretail

Hey Steve,,, sorry, already sold. Thanks, Fred.

Thanks
Steve

palallin · 09-09-2018, 09:10 AM

Is the truck gone?

**specialtyretail** · 09-09-2018, 01:44 PM

Quote:

Originally Posted by palallin

Is the truck gone?

What were you needing off of it? The guy that gets them from me keeps them around for a bit. Thanks, Fred.

72 k15 · 09-09-2018, 05:12 PM

Do you still have the 8ft stepside? How rusty was it?

palallin · 09-09-2018, 05:15 PM

I was toying with the idea of coming to get the whole bed, depending on the condition of the floor (and the cost).

72 k15 · 09-09-2018, 05:20 PM

Quote:

Originally Posted by palallin

I was toying with the idea of coming to get the whole bed, depending on the condition of the floor (and the cost).

Id rather have you at least cut it up and use it then let it sit and rot in a junkyard.

**specialtyretail** · 09-09-2018, 05:38 PM

Quote:

Originally Posted by palallin

I was toying with the idea of coming to get the whole bed, depending on the condition of the floor (and the cost).

Floor was totally gone... Thanks, Fred.

**specialtyretail** · 09-09-2018, 05:39 PM

Quote:

Originally Posted by 72 k15

Id rather have you at least cut it up and use it then let it sit and rot in a junkyard.

You are new here, and apparently have not followed what I do with these trucks, but I appreciate your passion. Thanks, Fred.

08-29-2018, 07:15 PM	#53
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: "It's a peach",, 69 C10 part out. Hood,,,, has rust in the drivers side leading corner. If you need it and can come get it,,, FREE..... Sorry,, I cannot hold it till you think you might be able to maybe get somewhere near here sometime in the future if you get around to it. If you can use it, come get it and it is yours. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

08-30-2018, 10:03 AM	#54
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,239	Re: "It's a peach",, 69 C10 part out. Can't tell from the pics: is it a longstep or short? If long, does it have the driver's side fender cut-out? Thanks. __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

08-30-2018, 01:35 PM	#57
SimonTek Registered User Join Date: Jun 2015 Location: Springville, IN Posts: 7	Re: "It's a peach",, 69 C10 part out. I'm curious, is that a long bed step side? __________________ 1969 Chevrolet C20 Longbed I-6 250, SM465

09-01-2018, 04:38 AM	#59
OutlawM92 Registered User Join Date: Aug 2013 Location: Clinton, IA Posts: 321	Re: "It's a peach",, 69 C10 part out. Does the cluster have a tach? __________________ 1969 C10 "Problem Child" 1981 C20 CCLB "Nightrain" "A good plan violently executed right now is far better than a perfect plan executed next week. Accept the challenges, so that you may feel the exhilaration of victory."

09-02-2018, 03:22 PM	#61
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: "It's a peach",, 69 C10 part out. About to go and be with it's ancestors.... Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

09-04-2018, 12:44 AM	#62
Castle09 Registered User Join Date: Aug 2018 Location: Fontana, California Posts: 42	Re: "It's a peach",, 69 C10 part out. Was Leonard out? I’m still hoping to get a piece of that 🍑. Would you be able to take a sawzall to the middle of the pillar on both sides and through the roof. I need to replace the portion where the top of the door meets the cab. Pass side Thanks

09-04-2018, 07:15 AM	#63
Leonard1 Registered User Join Date: Nov 2005 Location: Paducah, Ky Posts: 393	Re: "It's a peach",, 69 C10 part out. I'm definately out now, based on that last picture...

09-06-2018, 02:04 PM	#66
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,076	Re: "It's a peach",, 69 C10 part out. Is the Clutch Pedal available?? If so how much shipped to 94565. Don’t need brake assembly or pedal. JUST Clutch pedal Thanks Steve __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

09-09-2018, 09:10 AM	#69
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,239	Re: "It's a peach",, 69 C10 part out. Is the truck gone? __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

09-09-2018, 05:12 PM	#71
72 k15 Registered User Join Date: Sep 2018 Location: Fargo Posts: 377	Re: "It's a peach",, 69 C10 part out. Do you still have the 8ft stepside? How rusty was it?

09-09-2018, 05:15 PM	#72
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,239	Re: "It's a peach",, 69 C10 part out. I was toying with the idea of coming to get the whole bed, depending on the condition of the floor (and the cost). __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.