S-10 Drive Shaft Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GRADYS Performance · 09-17-2018, 11:34 AM

I will check this weekend to make sure it is still available and try to get a picture. It is the whole driveshaft. Only cost would be to ship it to you or him. It is used it may need joints etc.

**Ironhorse** · 09-17-2018, 03:54 PM

Quote:

Originally Posted by GRADYS Performance

I will check this weekend to make sure it is still available and try to get a picture. It is the whole driveshaft. Only cost would be to ship it to you or him. It is used it may need joints etc.

That sounds great, please do check if still available and pics are always good. If possible, pics of the u-joint sections would be good. Maybe break it down at the double cardon joint and ship wrapped together in cardboard? Let me know what you come up with. Thanks

**Ironhorse** · 09-26-2018, 05:15 AM

Any updates on the drive shaft, still available? Still looking for one, thanks.

GRADYS Performance · 09-26-2018, 10:00 AM

Still available, was not able to get pictures of it yet. Should get there Sunday.

**Ironhorse** · 09-26-2018, 12:09 PM

Thanks for the up date. Let me know, he is interested for pics, condition and price. Thanks for looking into this.

**Ironhorse** · 10-10-2018, 10:01 PM

Quote:

Originally Posted by GRADYS Performance

Still available, was not able to get pictures of it yet. Should get there Sunday.

Any progress with the pictures and availability, price, etc.? Thanks,

GRADYS Performance · 11-03-2018, 10:54 PM

Hi, I have not been on ere in quite some time then could not find the post. I have complete driveshaft in hand. Only cost to you would be shipping. It is out of a 1998 ext cab V6 4L60E from yoke to pinion flange.

**Ironhorse** · 11-04-2018, 05:57 PM

Hi, spoke with my friend and he is very interested in the drive shaft. Sending a PM your way for added info and questions.

09-17-2018, 11:34 AM	#1
GRADYS Performance Registered User Join Date: Dec 2013 Location: Columbus, Oh Posts: 366	Re: S-10 Drive Shaft Needed I will check this weekend to make sure it is still available and try to get a picture. It is the whole driveshaft. Only cost would be to ship it to you or him. It is used it may need joints etc.

09-26-2018, 05:15 AM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,071	Re: S-10 Drive Shaft Needed Any updates on the drive shaft, still available? Still looking for one, thanks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-26-2018, 10:00 AM	#4
GRADYS Performance Registered User Join Date: Dec 2013 Location: Columbus, Oh Posts: 366	Re: S-10 Drive Shaft Needed Still available, was not able to get pictures of it yet. Should get there Sunday.

09-26-2018, 12:09 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,071	Re: S-10 Drive Shaft Needed Thanks for the up date. Let me know, he is interested for pics, condition and price. Thanks for looking into this. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

11-03-2018, 10:54 PM	#7
GRADYS Performance Registered User Join Date: Dec 2013 Location: Columbus, Oh Posts: 366	Re: S-10 Drive Shaft Needed Hi, I have not been on ere in quite some time then could not find the post. I have complete driveshaft in hand. Only cost to you would be shipping. It is out of a 1998 ext cab V6 4L60E from yoke to pinion flange.

11-04-2018, 05:57 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,071	Re: S-10 Drive Shaft Needed Hi, spoke with my friend and he is very interested in the drive shaft. Sending a PM your way for added info and questions. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.