The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-05-2018, 02:25 AM   #301
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by bmfm64 View Post
Can you send me the install instructions?
PM me your address. Sorry for the delayed response, super busy.

Thank you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 01-12-2018, 03:30 PM   #302
ewoody625
Registered User
 
ewoody625's Avatar
 
Join Date: Jan 2009
Location: valparaiso,in
Posts: 730
Re: Volt Gauge Conversion Kits

I was under the impression this was going to be a "how to" thread obviously it is not. I already purchased an 87 cluster to swap the gauges but am unclear as to exactly what I need to do. Is that something you can help me with? How much if I sent you both gauges and the tin?
__________________
Eric

70 CST10 long bed in pieces also factory air and cruise(the project)

18 Silverado crew cab 5.3 4x4

My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166
ewoody625 is offline   Reply With Quote
Old 01-13-2018, 01:01 AM   #303
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by ewoody625 View Post
I was under the impression this was going to be a "how to" thread obviously it is not. I already purchased an 87 cluster to swap the gauges but am unclear as to exactly what I need to do. Is that something you can help me with? How much if I sent you both gauges and the tin?
I will send you a PM with details.

Thank you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 01-17-2018, 12:41 PM   #304
burnitg
Registered User
 
Join Date: Nov 2009
Location: Black Hawk, CO
Posts: 215
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by TBONE1964 View Post
Hello Burnett,

Yes I can help you. I have a few left that I can package to ship.

I am going to send you a private message with payment options.

Thank you,
Tom
Voltmeter received. Thanks Tom.
burnitg is offline   Reply With Quote
Old 01-20-2018, 04:15 PM   #305
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by burnitg View Post
Voltmeter received. Thanks Tom.
You are welcome Burnett.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 02-15-2018, 03:44 PM   #306
69Tom
Senior Member
 
69Tom's Avatar
 
Join Date: Jul 2015
Location: Phoenix, AZ
Posts: 1,331
Re: Volt Gauge Conversion Kits

PM sent.
69Tom is offline   Reply With Quote
Old 02-15-2018, 10:04 PM   #307
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by 69Tom View Post
PM sent.
PM returned,

Thank you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 02-21-2018, 08:21 AM   #308
jmader
Senior Member
 
jmader's Avatar
 
Join Date: Aug 2013
Location: Grand Island, NE
Posts: 1,485
Re: Volt Gauge Conversion Kits

PM sent
__________________
1949 Chevy 3100 Five Window
1964 Chevy C10 Lambrecht Auction project
1967 Chevy SWB K10
1967 GMC K15 Project
Build thread-
http://67-72chevytrucks.com/vboard/s...72#post6502772
1968 Chevy Anniversary K10
1991 K5 4" Lift 35's (the wife's toy)
jmader is offline   Reply With Quote
Old 03-06-2018, 10:58 PM   #309
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by jmader View Post
PM sent
Your conversion is on the way Mr. Should see it on Thursday.

Thank you again,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 05-03-2018, 01:00 AM   #310
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,070
Re: Volt Gauge Conversion Kits

Tom I installed one of your gauges last summer. I've seen this pictured reading quite a few times on the gauge and sometime sits just past the 13. Is this where it should be? My alternator and battery are new..
Attached Images
 
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" 4 Things When Used are Gone Forever "

" A Word After it is Said - A Missed Opportunity - Time once Passed - Trust after its Lost "


RIP Charlie Watts 1941 - 2021
Already Gone is offline   Reply With Quote
Old 05-20-2018, 03:33 PM   #311
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by Already Gone View Post
Tom I installed one of your gauges last summer. I've seen this pictured reading quite a few times on the gauge and sometime sits just past the 13. Is this where it should be? My alternator and battery are new..

Hi Greg,

Very sorry for the delay. If you have a volt meter on the battery while running, you should get say 14.5 or so volts. That would be with a good alternator output at idle. I use a 12 v battery charger set on 10 amps which gives me about 12.5 volts and that is where I set the needle. It is possible the needle slipped or I was in a brain fart mode that day and placed it wrong.

What I see in your photo should be about 15.5 which seems a little high. Did you check it at the battery? Make sure your regulator is not sticking and causing an over charge condition.

If you believe that the volt gauge conversion is in accurate, you can send it back to me for an adjustment or I can send you just the gauge that is set up correctly and you can just swap it.

Let me know what you would like to do. I will accommodate you and make this right. By the way, no charge to you.

Thank you,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 05-20-2018, 03:41 PM   #312
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Hello all,

I have 2 volt gauge conversions ready for sale if interested. They are $100.00 plus shipping which is $15.00 within CON US. Please inquire if not in the CON US for shipping quote.

Thank you for the interest,
Tom
Attached Images
  
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 05-20-2018, 05:01 PM   #313
Already Gone
70+ ( Old Skool Club )
 
Already Gone's Avatar
 
Join Date: Nov 2003
Location: Saskatoon, Saskatchewan ,Canada
Posts: 9,070
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by TBONE1964 View Post
Hi Greg,

Very sorry for the delay. If you have a volt meter on the battery while running, you should get say 14.5 or so volts. That would be with a good alternator output at idle. I use a 12 v battery charger set on 10 amps which gives me about 12.5 volts and that is where I set the needle. It is possible the needle slipped or I was in a brain fart mode that day and placed it wrong.

What I see in your photo should be about 15.5 which seems a little high. Did you check it at the battery? Make sure your regulator is not sticking and causing an over charge condition.

If you believe that the volt gauge conversion is in accurate, you can send it back to me for an adjustment or I can send you just the gauge that is set up correctly and you can just swap it.

Let me know what you would like to do. I will accommodate you and make this right. By the way, no charge to you.

Thank you,
Tom
I didn't think it was inaccurate I just wanted to make sure it was working as it should. Since I sent this I have verified the your gauge is working as it should..
__________________
1972 C10 Custom/Deluxe 613 Highlander 406/700R4
1999 White Tahoe LS 4x2 with Z56 Police Package
1992 K1500 GMC Suburban

Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601

" 4 Things When Used are Gone Forever "

" A Word After it is Said - A Missed Opportunity - Time once Passed - Trust after its Lost "


RIP Charlie Watts 1941 - 2021
Already Gone is offline   Reply With Quote
Old 05-20-2018, 05:10 PM   #314
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by Already Gone View Post
I didn't think it was inaccurate I just wanted to make sure it was working as it should. Since I sent this I have verified the your gauge is working as it should..
Just wanted to make sure you were OK Greg. I like to follow through with issues but it is good to here that there is not one

Take care,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 05-20-2018, 11:33 PM   #315
VWNate1
Registered User
 
VWNate1's Avatar
 
Join Date: Feb 2012
Location: So. Cali.
Posts: 2,603
Re: Volt Gauge Conversion Kits

Hard to find good customer service like this these days Tom .
__________________
-Nate
Geezer
'49 3100 235 W/ Muncie SM420 SOLD
'69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH
VWNate1 is offline   Reply With Quote
Old 08-18-2018, 02:05 PM   #316
Edmond
Registered User
 
Edmond's Avatar
 
Join Date: Jan 2000
Location: The Netherlands
Posts: 1,062
Re: Volt Gauge Conversion Kits

Hi Tom,

Just found this thread while searching for something completely different 😊
Anyway, I wanted to know if you still sell these conversion kits?
If so, could you give me an estimate on shipping to the Netherlands?
Thanks in advance.
__________________
1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb
1974 Chevy Camaro Z28 (Original)
-------------------------
Capelle a/d IJssel,
The Netherlands
Edmond is offline   Reply With Quote
Old 08-18-2018, 04:43 PM   #317
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by Edmond View Post
Hi Tom,

Just found this thread while searching for something completely different 😊
Anyway, I wanted to know if you still sell these conversion kits?
If so, could you give me an estimate on shipping to the Netherlands?
Thanks in advance.
Sure thing, If you can send me a PM with your complete shipping address, I can figure a quote and go from there.

Thank you for the interest,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 08-18-2018, 04:57 PM   #318
Edmond
Registered User
 
Edmond's Avatar
 
Join Date: Jan 2000
Location: The Netherlands
Posts: 1,062
Re: Volt Gauge Conversion Kits

Hi Tom,

PM sent.
Thank you. 👍
__________________
1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb
1974 Chevy Camaro Z28 (Original)
-------------------------
Capelle a/d IJssel,
The Netherlands
Edmond is offline   Reply With Quote
Old 08-18-2018, 11:23 PM   #319
dflarsen77
Active Member
 
Join Date: Jun 2016
Location: Salida, CA
Posts: 177
Re: Volt Gauge Conversion Kits

Sent you a PM tbone
__________________
David Larsen
1970 Chevrolet C-10
dflarsen77 is offline   Reply With Quote
Old 09-29-2018, 04:04 PM   #320
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

I have this volt gauge conversion ready to sell.

It will come with the wiring and instructions to install.

$100.00 or $115.00 shipped in med flat rate box with in CON US

Outside of CON US, I can quote shipping.

More kits will be done soon. Waiting for supplies.

Thank you ,
Tom
Attached Images
  
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 10-15-2018, 03:00 AM   #321
MySons68C20
Senior Member
 
MySons68C20's Avatar
 
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 892
Re: Volt Gauge Conversion Kits

Hi Tom, I will contact you tomorrow to purchase the gauge kit shown above.
Thanks.

Blake
MySons68C20 is offline   Reply With Quote
Old 10-15-2018, 04:21 PM   #322
MySons68C20
Senior Member
 
MySons68C20's Avatar
 
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 892
Re: Volt Gauge Conversion Kits

Email sent

Blake
MySons68C20 is offline   Reply With Quote
Old 10-15-2018, 11:31 PM   #323
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

Quote:
Originally Posted by MySons68C20 View Post
Email sent

Blake
Thank you Blake,

I appreciate your business,
Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Old 10-26-2018, 10:20 AM   #324
Stephen717
Senior Member
 
Stephen717's Avatar
 
Join Date: Aug 2016
Location: Loris South Carolina
Posts: 428
Re: Volt Gauge Conversion Kits

instead of running a hot leg between the temp and volt gauge could I leave part of my circuit board in place and tape the other part back?
Stephen717 is offline   Reply With Quote
Old 10-27-2018, 12:27 AM   #325
TBONE1964
Cluster King
 
TBONE1964's Avatar
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
Re: Volt Gauge Conversion Kits

[QUOTE=Stephen717;8372064]instead of running a hot leg between the temp and volt gauge could I leave part of my circuit board in place and tape the other part back?[/QUOTE

If you are referring to the amp gauge portion of the circuit board, they are both live. If you trace it back to the connector, you could actually wire your hot into the number one or twelve location on the connector. For the other side, that does not get used by the volt gauge. If you have amp gauge wiring correctly, either number one or twelve can be de pinned so no power passes through. That way you can wire the volt gauge with the circuit board.

You can run power to the volt gauge by any means you feel acceptable for your purpose. As long as it has battery voltage an ground, it will work.

One reason I like to tag off the temp gauge is for trouble shooting. If the user has a failure of a volt gauge, the question is does the temp gauge and fuel gauge still work. They all share power. if they all fail, then it is a different approach to diagnose.

I provide everything needed to swap this into your truck and have a source to wire it.

Hope this helps,

Tom
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com

I am also a dealer for Counterpart for gauge cluster parts only.

Also see my facebook page, CG&C
TBONE1964 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com