KS Parting a 70 custom 10 - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 10-22-2014, 10:43 AM

Quote:

Originally Posted by mo

Sounds good let me know

Lets go with $60 shipped and ill cover anything that was over $15.

Quote:

Originally Posted by engairuph

The a/c box looks good, dollar and shipped to 39540 for total????? email msairinteriors and money order or paypal?????
Thanks
Ralph

This inner and outer box is in good shape with no broken tabs or anything...
Ill do $150 shipped

Quote:

Originally Posted by best view

the original cap on that truck

Did you need a 71-2 cap or a 69-70 cap?
If I have the one you need Ill go $15 shipped

Quote:

Originally Posted by Dads1967

How much for the seat tracks?

$45 Shipped for the tracks.

Quote:

Originally Posted by Dads1967

I need a good driver side window regulator as well.

Ill have to see if I have a good one... I can add it to the tracks for $15 additional.

Dads1967 · 10-22-2014, 01:42 PM

Great Please let me know ASAP. I'm building a 67 C10 for my dad to surpirise him for his 50th Birthday and I have to have the truck done Nov 8th.

**Cash3481** · 10-22-2014, 01:59 PM

Quote:

Originally Posted by Dads1967

Great Please let me know ASAP. I'm building a 67 C10 for my dad to surpirise him for his 50th Birthday and I have to have the truck done Nov 8th.

I definitely have seat tracks and a gas cap. I was only concerned that you may need a different cap than the one I have. Ill post a picture of a cap after work. If your good with it, Ill box it up after work and can ship it tomorrow. If you need it mailed priority we can talk in PM about the additional costs.

Dads1967 · 10-22-2014, 02:06 PM

Mike, I need the seat tracks and a window regulator for the driver side not a gas cap.

mo · 10-22-2014, 02:33 PM

pm me the details.

**Cash3481** · 10-22-2014, 03:46 PM

Quote:

Originally Posted by Dads1967

Mike, I need the seat tracks and a window regulator for the driver side not a gas cap.

Got ya... dang meds! LOL

Quote:

Originally Posted by mo

pm me the details.

On the way.

engairuph · 10-22-2014, 05:29 PM

I'll take it money in paypal to who?

**Cash3481** · 10-22-2014, 06:37 PM

Quote:

Originally Posted by engairuph

I'll take it money in paypal to who?

Pm is inbound!

Dads1967 · 10-22-2014, 07:19 PM

Sent pm

**Cash3481** · 10-22-2014, 10:46 PM

Here is a picture of the crossmember, seat tracks with bolts and the gas cap! I do not have the window regulator removed from doors. The handle on the tracks has tape on it (looks like it may have been cracked or broken at some point. I'll have to check the doors I have and remove one if your still interested.

Dads1967 · 10-22-2014, 11:16 PM

Those brackets look just like the ones I have but they will not bolt up to my seat. I must have an earlier seat or something. Dang I wish I could use them. Sorry and thank you. Let me know on the window regulator. I will need one of the for sure the splines for the handle are all stripped out. I will need a good set of inside window cranks and door handles if you have any.

Thanks
Josh

mo · 10-23-2014, 12:25 PM

Money sent in two different transactions sorry. My mistake

javelinmania · 10-23-2014, 11:54 PM

Looking for the brackets on top of the frame that the cross bars that hold up the bed attach to.

**Cash3481** · 10-24-2014, 07:27 AM

Quote:

Originally Posted by Dads1967

Those brackets look just like the ones I have but they will not bolt up to my seat. I must have an earlier seat or something. Dang I wish I could use them. Sorry and thank you. Let me know on the window regulator. I will need one of the for sure the splines for the handle are all stripped out. I will need a good set of inside window cranks and door handles if you have any.
Thanks
Josh

I didn't have a good window regulator that wasnt already in a complete door, sorry! I sold all the handles a few months ago.

Quote:

Originally Posted by mo

Money sent in two different transactions sorry. My mistake

no problem, I saw that and figured it out!

Quote:

Originally Posted by javelinmania

Looking for the brackets on top of the frame that the cross bars that hold up the bed attach to.

Short or long bed, or do you only need 2? I have a set of them. I get $10 each for them. I'll get you a picture.

javelinmania · 10-24-2014, 08:09 AM

My truck is a hybrid. It started life as a long bed and then the frame was shortened to a short bed and has a Dodge Bed sitting on it. I plan to keep the Dodge bed (looks neat), but right now, the bed is only attached to the frame at the front and rear. So I need a full set of brackets. If you have them for both a long and a short that will be even better. I would rather shim or modify an existing bracket than make new ones. Pictures are at http://67-72chevytrucks.com/vboard/s...96#post6870196

**Cash3481** · 10-24-2014, 11:25 AM

Quote:

Originally Posted by javelinmania

My truck is a hybrid. It started life as a long bed and then the frame was shortened to a short bed and has a Dodge Bed sitting on it. I plan to keep the Dodge bed (looks neat), but right now, the bed is only attached to the frame at the front and rear. So I need a full set of brackets. If you have them for both a long and a short that will be even better. I would rather shim or modify an existing bracket than make new ones. Pictures are at http://67-72chevytrucks.com/vboard/s...96#post6870196

Here is a pic of the pieces I have already removed!

**Cash3481** · 11-04-2014, 05:48 PM

I wanted to post an apology on here for not sending a few parts that were paid for over the last 2 weeks. Long story short, I separate parts paid for from one that are not.
A few in particular that I am specificly meaning is:
MO
RODNRUDY
68Panelman
Gambler77
I am addressing the way (and space) where I keep the parts to address the issue. I apologize on this thread and it will be in the member dealings section too.
Again, Sorry to you all and anyone else I may have been slow dealing with lately.

68panelman · 11-04-2014, 05:58 PM

No hard feelings here Mike.

langs3199 · 09-05-2018, 06:07 AM

I see this is a 70 cst with ac , I am looking for the rt side kick panel door
that operates with vacuum. do you still have it ? is so how much and the codtion of it thx

Memmons1968 · 09-14-2018, 10:15 PM

Would you sell chunk of cab? Looking for drivers side upper cab corner from about center of the door up to center of rear window. Just corner from door jamb around to almost rear window. Mine is partially crushed where bed hit cab.

Hotrod1952 · 11-05-2018, 12:18 PM

how much for both a/c dash vents? (right and left)

10-22-2014, 01:42 PM	#177
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 Great Please let me know ASAP. I'm building a 67 C10 for my dad to surpirise him for his 50th Birthday and I have to have the truck done Nov 8th.

10-22-2014, 02:06 PM	#179
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 Mike, I need the seat tracks and a window regulator for the driver side not a gas cap.

10-22-2014, 02:33 PM	#180
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting a 70 custom 10 pm me the details. __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

10-22-2014, 05:29 PM	#182
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 I'll take it money in paypal to who?

10-22-2014, 07:19 PM	#184
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 Sent pm

10-22-2014, 10:46 PM	#185
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 70 custom 10 Here is a picture of the crossmember, seat tracks with bolts and the gas cap! I do not have the window regulator removed from doors. The handle on the tracks has tape on it (looks like it may have been cracked or broken at some point. I'll have to check the doors I have and remove one if your still interested. Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

10-22-2014, 11:16 PM	#186
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 Those brackets look just like the ones I have but they will not bolt up to my seat. I must have an earlier seat or something. Dang I wish I could use them. Sorry and thank you. Let me know on the window regulator. I will need one of the for sure the splines for the handle are all stripped out. I will need a good set of inside window cranks and door handles if you have any. Thanks Josh

10-23-2014, 12:25 PM	#187
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting a 70 custom 10 Money sent in two different transactions sorry. My mistake __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

10-23-2014, 11:54 PM	#188
javelinmania Registered User Join Date: Sep 2014 Location: Lexington, SC Posts: 126	Re: Parting a 70 custom 10 Looking for the brackets on top of the frame that the cross bars that hold up the bed attach to.

10-24-2014, 08:09 AM	#190
javelinmania Registered User Join Date: Sep 2014 Location: Lexington, SC Posts: 126	Re: Parting a 70 custom 10 My truck is a hybrid. It started life as a long bed and then the frame was shortened to a short bed and has a Dodge Bed sitting on it. I plan to keep the Dodge bed (looks neat), but right now, the bed is only attached to the frame at the front and rear. So I need a full set of brackets. If you have them for both a long and a short that will be even better. I would rather shim or modify an existing bracket than make new ones. Pictures are at http://67-72chevytrucks.com/vboard/s...96#post6870196

11-04-2014, 05:48 PM	#192
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 70 custom 10 I wanted to post an apology on here for not sending a few parts that were paid for over the last 2 weeks. Long story short, I separate parts paid for from one that are not. A few in particular that I am specificly meaning is: MO RODNRUDY 68Panelman Gambler77 I am addressing the way (and space) where I keep the parts to address the issue. I apologize on this thread and it will be in the member dealings section too. Again, Sorry to you all and anyone else I may have been slow dealing with lately. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

11-04-2014, 05:58 PM	#193
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,451	Re: Parting a 70 custom 10 No hard feelings here Mike.

09-05-2018, 06:07 AM	#194
langs3199 Registered User Join Date: Aug 2018 Location: Petersburg Virginia Posts: 1	Re: Parting a 70 custom 10 I see this is a 70 cst with ac , I am looking for the rt side kick panel door that operates with vacuum. do you still have it ? is so how much and the codtion of it thx

09-14-2018, 10:15 PM	#195
Memmons1968 Registered User Join Date: Sep 2018 Location: Hudson, Wisconsin Posts: 5	Re: Parting a 70 custom 10 Would you sell chunk of cab? Looking for drivers side upper cab corner from about center of the door up to center of rear window. Just corner from door jamb around to almost rear window. Mine is partially crushed where bed hit cab.

11-05-2018, 12:18 PM	#196
Hotrod1952 Registered User Join Date: Sep 2013 Location: Sioux Center IA Posts: 184	Re: Parting a 70 custom 10 how much for both a/c dash vents? (right and left)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.