"Drum to Disc" Conversion FAQ 60-70

[lolife99]

Originally Posted by tx71smallblock

i have a 70 that i converted to disc front. im going to replace the master cylinder and proportioning valve to a 71 style disc/drum. do i need the front brake lines specific to 71 or will my stock lines work?
manual not power btw

71-72 steel brake lines connect to the rubber hoses at a different spot on the crossmember.
(front side vs the rear side where your 70 connects)
I would would use all your original lines if they are in good condition.
You may have to extend or re-bend the rear brake line to the proportioning valve.