VA 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, MORE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Another 72 · 02-06-2019, 01:49 PM

Still some good parts available here. All parts (except brake back plate) came off my 1972 K5 from South Dakota. Asking prices below plus shipping from 22191. I can provide additional photos.

SOLD! Bucket Seats & Brackets (driver slider, passenger tilt, seat cushions and upholstery bad, brackets and seat frames good)
SOLD! Gas Tank Skid Plate
SOLD! 21-Gallon Gas Tank

$50
Inner Heater Box;
Outer Heater Box;
Heater Control w/Cables;
Radiator (no leaks)

$40:
Grille & Chrome Shell (cut in bottom center for winch clearance - see photos);

$30:
Steel Fuel Lines;
Wiring (includes voltage regulator, ignition switch, fuse block, front grlle turn signals);
Wheel Hub (Dana 44)

$10:
Long Front to Rear Brake Line;
Blower Motor w/Wheel;
Door Mirror (ea)
SOLD! Disc Brake Backing Plate (see photos, ordered as a replacement but didn't match my K5...maybe from a 2wd?);

FREE:
Brake Master Cylinder
Brake Vacuum Booster
Heater Core (no leaks)
DONATED! Brake Prop Valve
DONATED! Speedometer Cable
DONATED! Headlight Switch w/Knob

**72ironmike** · 02-06-2019, 01:53 PM

I'll take seats.

Madkidd007 · 02-06-2019, 02:42 PM

Would be interested in grille pending a few items. Shipping, better pictures of the outter edges, and a measurement of the width of the cut

Travisarmenta · 02-06-2019, 03:04 PM

Sent you a PM, Local guy here.

**1rippen6** · 02-06-2019, 03:54 PM

I'll get in line on the seats and I can pick up.

**lks dcvn** · 02-06-2019, 03:54 PM

I'll get in line on the seats - good buy Mike!

**GMCNUT** · 02-06-2019, 04:01 PM

I'll take the gas tank skid plate - PM payment details

dirish · 02-06-2019, 04:03 PM

Picture of 21 gallon gas take please.

dirish · 02-06-2019, 04:44 PM

Quote:

Originally Posted by dirish

Picture of 21 gallon gas tank please.

fuel lines, hubs.
Shipped to 37148 please. Pending pictures
Is the neck on the tank, any hardware?
Thanks Dan

Another 72 · 02-06-2019, 05:47 PM

Quote:

Originally Posted by dirish

fuel lines, hubs.
Shipped to 37148 please. Pending pictures
Is the neck on the tank, any hardware?
Thanks Dan

only have 1 hub, keeping neck for now, one strap survived disassembly

Another 72 · 02-06-2019, 05:53 PM

Quote:

Originally Posted by dirish

Picture of 21 gallon gas take please.

gas tank pics attached

dirish · 02-06-2019, 06:10 PM

Quote:

Originally Posted by Another 72

gas tank pics attached

If it is solid no rust through or damage and tanks neck is there, I will take it shipped to 37087 business. Thank you, I need this.
Dan

Another 72 · 02-06-2019, 06:26 PM

Quote:

Originally Posted by Madkidd007

Would be interested in grille pending a few items. Shipping, better pictures of the outter edges, and a measurement of the width of the cut

Shipping via USPS is $103 and materials (I will have to build a 1x2 frame box covered with cardboard) comes to about $120 for shipping. The cut in the middle is 26.5 inches. I just noticed a 8-9 inch gash in lower left corner. I'll go $50 plus shipping with that gash to pay for my time to package it. Best I can do. Some additional pics attached.

Another 72 · 02-06-2019, 06:35 PM

Quote:

Originally Posted by 72ironmike

I'll take seats.

Additional pics attached. Skirts surface rusted, not rusted through. Found passenger side brackets securing seat to floor. Everything works well, and parts are in good shape.

Another 72 · 02-06-2019, 06:58 PM

Quote:

Originally Posted by GMCNUT

I'll take the gas tank skid plate - PM payment details

Shipping info for the gas tank is about 28 x 33 x 9, 40 pounds. Shipping to Arab, AL is $60, packaging (wood framed cardboard skinned box) is $20, $280 plus PayPal costs. I'll PM my PayPal info.

Another 72 · 02-06-2019, 07:02 PM

Quote:

Originally Posted by dirish

If it is solid no rust through or damage and tanks neck is there, I will take it shipped to 37087 business. Thank you, I need this.
Dan

Do you mean the filler neck? I'm keeping the filler neck for now. The tank neck is there as pictured. Please confirm.

dirish · 02-06-2019, 08:07 PM

Quote:

Originally Posted by Another 72

Do you mean the filler neck? I'm keeping the filler neck for now. The tank neck is there as pictured. Please confirm.

Don't need the fill spout or vent tube., just the spout on tank, it appears it's there, it is solid not rubber, right. I need that curved hard pipe mounted to the tank. Thanks and sorry for all the questions.
Dan addy is 37087 lebanon Tn.

Madkidd007 · 02-06-2019, 08:28 PM

Quote:

Originally Posted by Another 72

Shipping via USPS is $103 and materials (I will have to build a 1x2 frame box covered with cardboard) comes to about $120 for shipping. The cut in the middle is 26.5 inches. I just noticed a 8-9 inch gash in lower left corner. I'll go $50 plus shipping with that gash to pay for my time to package it. Best I can do. Some additional pics attached.

I’ll think on it

**72ironmike** · 02-07-2019, 10:10 AM

Rob, Thanks for extra pics. PayPal sent.

Break em down like we talked for ship. PM sent with address. Mike.

Another 72 · 02-07-2019, 04:14 PM

Quote:

Originally Posted by dirish

Don't need the fill spout or vent tube., just the spout on tank, it appears it's there, it is solid not rubber, right. I need that curved hard pipe mounted to the tank. Thanks and sorry for all the questions.
Dan addy is 37087 lebanon Tn.

Dan,

Crating and shipping on the tank is $90. Best I can do on shipping the tank, hub, and fuel lines (separate packages) is $180. The tank inlet tube is metal and it's perfectly intact.

Rob

Another 72 · 02-07-2019, 04:20 PM

Quote:

Originally Posted by Another 72

Shipping info for the gas tank is about 28 x 33 x 9, 40 pounds. Shipping to Arab, AL is $60, packaging (wood framed cardboard skinned box) is $20, $280 plus PayPal costs. I'll PM my PayPal info.

Sorry, that was for the gas tank SKID PLATE not the tank.

dirish · 02-07-2019, 04:43 PM

Pm sent.

dirish · 02-08-2019, 06:58 AM

Quote:

Originally Posted by dirish

Pm sent.

Payment sent. Thank You

02-06-2019, 01:49 PM	#1
Another 72 Registered User Join Date: Apr 2016 Location: Woodbridge Virginia Posts: 81	Some parts FREE! 1972 Blazer Parts, Inner/Outer Heater Box, MORE! Still some good parts available here. All parts (except brake back plate) came off my 1972 K5 from South Dakota. Asking prices below plus shipping from 22191. I can provide additional photos. SOLD! Bucket Seats & Brackets (driver slider, passenger tilt, seat cushions and upholstery bad, brackets and seat frames good) SOLD! Gas Tank Skid Plate SOLD! 21-Gallon Gas Tank $50 Inner Heater Box; Outer Heater Box; Heater Control w/Cables; Radiator (no leaks) $40: Grille & Chrome Shell (cut in bottom center for winch clearance - see photos); $30: Steel Fuel Lines; Wiring (includes voltage regulator, ignition switch, fuse block, front grlle turn signals); Wheel Hub (Dana 44) $10: Long Front to Rear Brake Line; Blower Motor w/Wheel; Door Mirror (ea) SOLD! Disc Brake Backing Plate (see photos, ordered as a replacement but didn't match my K5...maybe from a 2wd?); FREE: Brake Master Cylinder Brake Vacuum Booster Heater Core (no leaks) DONATED! Brake Prop Valve DONATED! Speedometer Cable DONATED! Headlight Switch w/Knob Attached Images __________________ Rob "1967 Wanna Be" 1972 K5 Blazer Last edited by Another 72; 02-15-2019 at 04:15 PM. Reason: Update item status, prices

02-06-2019, 01:53 PM	#2
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,056	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, I'll take seats.

02-06-2019, 02:42 PM	#3
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,234	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, Would be interested in grille pending a few items. Shipping, better pictures of the outter edges, and a measurement of the width of the cut __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

02-06-2019, 03:04 PM	#4
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, Sent you a PM, Local guy here.

02-06-2019, 03:54 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,716	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, I'll get in line on the seats and I can pick up.

02-06-2019, 03:54 PM	#6
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, I'll get in line on the seats - good buy Mike!

02-06-2019, 04:01 PM	#7
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, I'll take the gas tank skid plate - PM payment details __________________ My Projects and Toys - All 100% Stock 1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction 1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar 1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock 1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd 1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet 1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight 1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB 1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet 1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet 1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.

02-06-2019, 04:03 PM	#8
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, Picture of 21 gallon gas take please.

02-07-2019, 10:10 AM	#19
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,056	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, Rob, Thanks for extra pics. PayPal sent. Break em down like we talked for ship. PM sent with address. Mike.

02-07-2019, 04:43 PM	#22
dirish Registered User Join Date: Dec 2012 Location: Heart of Tennessee Posts: 1,120	Re: 1972 Blazer Bucket Seats &Brackets, Gas Tank Skid Plate, Inner/Outer Heater Box, Pm sent.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.