'73-'87 Stepside Box FS, PNW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 05-25-2004, 06:58 PM

Seattle area. This box is solid and straight with no rust. Shaved stake pockets, shaved seams around tailgate location, custom box ends, fenders straight with a skim coat in one area, lots of primered areas, no wood or holddown strips but cross members and floor supports are very good without rust. $300. I can deliver in Seattle-Portland area for a small charge. I will consider parting and will consider shipping.

stllookn · 05-25-2004, 07:06 PM

Box ends have been been shaved to eliminate having to stare at the ugly hole.

stllookn · 05-25-2004, 07:13 PM

The dent repair is complete and the repair is in primer...not shown here...LOL! $300 or OBO...if you have a good way to ship it I will put it on a pallet and or load it.

74Pumpkin · 05-28-2004, 08:44 AM

I might be intrested in the bedsides if you are going to part it out. Would you ship them and what would you like to get including shipping to 55044?

stllookn · 05-28-2004, 11:58 AM

I would want about $125 for the bed sides and shipping would be about $55 depending on the weight. I am pretty certain that I could do it all for less than $185. It all depends upon the fenders right now. I have been toying with using the box on my '67 stepside, if I decide to keep that truck. The box on the stepside is solid but has lots of dents from farm use...this '77 box is very straight and clean. I guess that is the problem with too many choices...LOL! Selling it eliminates the problem!

BodyShopDropOut12 · 05-30-2004, 03:20 PM

What would shipping prob be to 43230? And if you decide to keep, I'd like that other bed with the body damage. How much would you let that go if selling it?

74Pumpkin · 06-01-2004, 12:17 AM

Still intrested in the sides.

stllookn · 06-01-2004, 02:36 PM

I am trying to sort out the fenders right now and will keep you posted on the bed sides.

05-25-2004, 06:58 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	'73-'87 Stepside Box FS, PNW Seattle area. This box is solid and straight with no rust. Shaved stake pockets, shaved seams around tailgate location, custom box ends, fenders straight with a skim coat in one area, lots of primered areas, no wood or holddown strips but cross members and floor supports are very good without rust. $300. I can deliver in Seattle-Portland area for a small charge. I will consider parting and will consider shipping. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-25-2004, 07:06 PM	#2
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Box ends have been been shaved to eliminate having to stare at the ugly hole. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 05-25-2004 at 07:19 PM.

05-25-2004, 07:13 PM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	The dent repair is complete and the repair is in primer...not shown here...LOL! $300 or OBO...if you have a good way to ship it I will put it on a pallet and or load it. Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 05-25-2004 at 07:22 PM.

05-28-2004, 08:44 AM	#4
74Pumpkin Insert witty comment here Join Date: Nov 2003 Location: Lakeville Minnesota Posts: 388	I might be intrested in the bedsides if you are going to part it out. Would you ship them and what would you like to get including shipping to 55044? __________________ So many trucks, So little time!

05-28-2004, 11:58 AM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I would want about $125 for the bed sides and shipping would be about $55 depending on the weight. I am pretty certain that I could do it all for less than $185. It all depends upon the fenders right now. I have been toying with using the box on my '67 stepside, if I decide to keep that truck. The box on the stepside is solid but has lots of dents from farm use...this '77 box is very straight and clean. I guess that is the problem with too many choices...LOL! Selling it eliminates the problem! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

05-30-2004, 03:20 PM	#6
BodyShopDropOut12 9 months Join Date: May 2004 Location: Gahanna, OH/Jacksonville, AR Posts: 430	What would shipping prob be to 43230? And if you decide to keep, I'd like that other bed with the body damage. How much would you let that go if selling it?

06-01-2004, 12:17 AM	#7
74Pumpkin Insert witty comment here Join Date: Nov 2003 Location: Lakeville Minnesota Posts: 388	Still intrested in the sides. __________________ So many trucks, So little time!

06-01-2004, 02:36 PM	#8
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I am trying to sort out the fenders right now and will keep you posted on the bed sides. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.