1987 R10...aka Belushi - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TKCR** · 05-26-2019, 10:39 AM

Those urethane dashes will warp. There are only 2 places that I know that have metal frame dashes, Cheyenne & USA1 Industries. I have heard good things about both dashes.
I saw a guys URETHANE dash that was less than a year old. It looked like sh!t, it was warped/wavy. It was nasty looking

**nlped** · 05-26-2019, 02:21 PM

Quote:

Originally Posted by TKCR

Those urethane dashes will warp. There are only 2 places that I know that have metal frame dashes, Cheyenne & USA1 Industries. I have heard good things about both dashes.
I saw a guys URETHANE dash that was less than a year old. It looked like sh!t, it was warped/wavy. It was nasty looking

Yep, that’s what my experience was too.

**nlped** · 05-26-2019, 02:24 PM

I’m plugging along on the d/s door panel. Got it taken off and taken all apart. I’ve cleaned the panel itself up and it looks pretty good, but the upper metal trim and the velour inset piece looks like poop so I sourced new ones.

The replacement carpet lower panel looks much better than the original ones!

**nlped** · 05-26-2019, 02:26 PM

Nothing over the top, but I also went from this to this...

**TKCR** · 05-26-2019, 09:18 PM

Quote:

Originally Posted by nlped

I’m plugging along on the d/s door panel. Got it taken off and taken all apart. I’ve cleaned the panel itself up and it looks pretty good, but the upper metal trim and the velour inset piece looks like poop so I sourced new ones.

The replacement carpet lower panel looks much better than the original ones!

Wow those old ones were dirty. Those do look a lot better. I like the wheels too

05-26-2019, 10:39 AM	#1
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,887	Re: 1987 R10...aka Belushi Those urethane dashes will warp. There are only 2 places that I know that have metal frame dashes, Cheyenne & USA1 Industries. I have heard good things about both dashes. I saw a guys URETHANE dash that was less than a year old. It looked like sh!t, it was warped/wavy. It was nasty looking __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

05-26-2019, 02:24 PM	#3
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 1987 R10...aka Belushi I’m plugging along on the d/s door panel. Got it taken off and taken all apart. I’ve cleaned the panel itself up and it looks pretty good, but the upper metal trim and the velour inset piece looks like poop so I sourced new ones. The replacement carpet lower panel looks much better than the original ones! Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-26-2019, 02:26 PM	#4
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: 1987 R10...aka Belushi Nothing over the top, but I also went from this to this... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha Last edited by nlped; 05-26-2019 at 02:37 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.