The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-16-2019, 11:13 PM   #1
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
WTB: Overdrive Cable Clamp

I'm looking for the overdrive cable clamp that secures the cable at the solenoid.

I've included a pic of what I need and my current setup.

I could probably end up making one, but while I'm at school and don't have access to the stuff I need to make one, I figure I'll see if there's one out there somewhere
Attached Images
  
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-16-2019, 11:50 PM   #2
shortstep60
Registered User
 
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
Re: WTB: Overdrive Cable Clamp

I have a over drive trans in a 65 will look and see if it has a clamp
shortstep60 is offline   Reply With Quote
Old 10-17-2019, 01:39 PM   #3
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Quote:
Originally Posted by shortstep60 View Post
I have a over drive trans in a 65 will look and see if it has a clamp
Thanks!
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-17-2019, 04:10 PM   #4
The Rocknrod
Moderator

 
The Rocknrod's Avatar
 
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
Re: WTB: Overdrive Cable Clamp

Will this work?

http://www.billstruckshop.com/60-66.html
The Rocknrod is offline   Reply With Quote
Old 10-17-2019, 07:39 PM   #5
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Thank you for the suggestion Rocknrod. I just went out to look at the size, and unfortunately the clamp is much bigger than the OD cable
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-21-2019, 12:01 PM   #6
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Still looking
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-21-2019, 05:05 PM   #7
shortstep60
Registered User
 
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
Re: WTB: Overdrive Cable Clamp

Mine is gone sorry I could not help you
Posted via Mobile Device
shortstep60 is offline   Reply With Quote
Old 10-21-2019, 07:35 PM   #8
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Quote:
Originally Posted by shortstep60 View Post
Mine is gone sorry I could not help you
Posted via Mobile Device
Thanks for looking, I appreciate it
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 10-28-2019, 01:09 PM   #9
GMCNUT
Senior Member
 
GMCNUT's Avatar
 
Join Date: Jun 2007
Location: Arab Alabama
Posts: 1,809
Re: WTB: Overdrive Cable Clamp

Quote:
Originally Posted by cwcarpenter98 View Post
Thank you for the suggestion Rocknrod. I just went out to look at the size, and unfortunately the clamp is much bigger than the OD cable
Just make your cable larger by adding some fuel line over it nice and snug, then stick that into the park brake cable clamp and tighten. a few rounds of Black Gorilla tape on the OD cable would also work
__________________
My Projects and Toys - All 100% Stock
1972 CST "Highlander" Blazer - 350 auto, PS, PB, A/C, Tilt, Tach, AM/FM & Positraction
1966 Chevy SWB Fleetside BBW Custom Cab, #'s matching 327 V8 & Powerglide, factory deluxe heat, PS, PB, Tinted Glass, sway bar
1961 Chevy SWB Fleetside BBW Custom Cab #'s matching 283 V8 & Powerglide w/ uber-rare Cool-Pack A/C, factory PB, deluxe heat, Clock
1961 GMC K1000 4x4 SWB w/ BBW, Custom Cab and numbers matching 305D V6 engine & 4 spd
1960 GMC SWB Fleetside BBW Custom Cab #'s matching 305A V6 & Hydramatic, factory PB, Clock, Tach, Compass, Hood Jet
1959 Chevy SWB Fleetside BBW Custom Cab w/ rare stainless bed trim, #'s matching 283 V8 & Hydramatic, Deluxe Heat, radio, spotlight
1958 Chevy Cameo #'s matching 283 V8 & Hydramatic, radio, window washers, Factory PB
1958 GMC BBW SWB Fleetside Custom Cab, #'s matching 336 V8 Hydramatic, Factory PS, PB, Clock, RSD, Deluxe Heat & Hood Jet
1957 GMC Suburban Pickup (GMC's Cameo) #'s matching 347 V8 Hydramatic, uber-rare vacuum ashtray, Factory PS, PB, Clock, RSD, Hood Jet
1956 Chevy 3800 1 ton w/ rare 9 ft stepside bed, factory 265 V8 w/ Hydramatic, factory PB, Custom Cab, deluxe heat, spotlight and hood jet.
GMCNUT is offline   Reply With Quote
Old 10-28-2019, 01:26 PM   #10
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Quote:
Originally Posted by GMCNUT View Post
Just make your cable larger by adding some fuel line over it nice and snug, then stick that into the park brake cable clamp and tighten. a few rounds of Black Gorilla tape on the OD cable would also work
That is a good idea. I'll have to see if I can make it work next time I go back home. I don't have all my spare parts and such down here at college
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 01-10-2020, 02:48 PM   #11
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Still looking for the clamp
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 03-08-2020, 05:02 PM   #12
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Maybe someone has one that I could get some measurements off of so that I could make my own??
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Old 03-08-2020, 06:54 PM   #13
shortstep60
Registered User
 
Join Date: Nov 2013
Location: Mayetta, Kansas
Posts: 439
Re: WTB: Overdrive Cable Clamp

I have one on a four bolt over drive that I am going to sale. I will make one for you. Thanks for help me on my overdrive.
shortstep60 is offline   Reply With Quote
Old 03-08-2020, 08:54 PM   #14
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,419
Re: WTB: Overdrive Cable Clamp

Quote:
Originally Posted by shortstep60 View Post
I have one on a four bolt over drive that I am going to sale. I will make one for you. Thanks for help me on my overdrive.
Thanks! I'm glad I could help ya with it. It was good talking to ya again as well
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:32 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com