'69 C10 - Black on Black

[cornerstone]

What was the brand name of the 2 part urethane for the drip rails? It looks different than the 3M that I used. Your channel look more full than mine does. I ran a little short and want to add some more...

[MDPotter]

Originally Posted by cornerstone

What was the brand name of the 2 part urethane for the drip rails? It looks different than the 3M that I used. Your channel look more full than mine does. I ran a little short and want to add some more...

It's an Eastwood product. It has a decent working time - as you probably already know, it's best to apply it and not touch it. With this stuff, you can go back and add a little bit if it doesn't quite flow out and fill the channel but you have to do it within 15 minutes or so.

[MDPotter]

We've spent the last two Saturdays doing filler work on the cab and bedsides. Mix it up, spread it, sand it, repeat. Not fun at all but the cab is 95% done and will be getting high build primer next weekend.

Also dug the bench seat frame from my 68 out of storage so we can use it on this truck. The seats that the previous owner bought were crazy expensive and not at all comfortable or appealing. So I ordered new foam and a houndstooth seat cover for this one. I almost wish I would have put a bench seat in my 68...