Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-15-2020, 05:02 PM | #1 |
Registered User
Join Date: Mar 2015
Location: Deer Park, Tx.
Posts: 3
|
Re: ground issues and general wiring help
|
11-15-2020, 07:55 PM | #2 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,943
|
Re: ground issues and general wiring help
VetteVet, is the man when it comes to electrical.
Just some general things to look at first. Battery of truck grounded to frame are motor. Motor grounded to frame. Cab grounded to motor Cab grounded to frame both sides frame to bed both sides. All light housing's are grounded to the metal of the truck some how. Clean all spots good. Dash cluster should have a ground wire running to the dash also seperate from the harness.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
11-15-2020, 10:53 PM | #3 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,575
|
Re: ground issues and general wiring help
-
Old thread and the OP hasn't been on since 5/16/20. Don't know why it never went any farther. It ended kind of abruptly..... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
11-21-2020, 03:02 AM | #4 |
Registered User
Join Date: Jun 2015
Location: chanute ks
Posts: 15
|
Re: ground issues and general wiring help
Sorry for not coming back, but I did figure it out, the hard way.
Apparently I wired all my turn signals wrong. The wireing instructions were not very clear from LMS. They claimed that if you had this one year, you use this wire and not that wire and so forth. I eventually just made some jumper wires for the weather packs then trial and errored it till they worked. I can't remember the specific wire colors that I ended up with at the moment though. |
Bookmarks |
Tags |
c20, truck, wire |
|
|