Working Man's Burbon

[LockDoc]

Originally Posted by HO455

I have a 1-1/4" factory bar.
Having looked back at the fabrication photos my original statement of the sway bar mounts moving 1 inch was wrong. From the pictures it looks like 1/2" is a more accurate dimension. I find it interesting that only a half inch was that immediately noticeable.
Until now I hadn't considered that when I did the caster modification to the lower control arm shafts I moved the mount forward on the bar about 3/4". A 2 for 1 modification more caster and a stiffer sway bar!

That 1 1/4" bar should work good. I have the small one on the Panel Truck and it even made a lot of difference.

LockDoc