p/s pressure hose - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheatham · 07-13-2004, 05:37 PM

Could someone check real quick, or do you know... does the pressure hose go to the front or back on the power steeriing?

Thanks.

franko72 · 07-13-2004, 06:04 PM

my hoses are both connected to the back on my p.s. pump . It may be different because its a big block 72

cheatham · 07-13-2004, 06:06 PM

Sorry, I didn't say my question very well. I mean does the p/s pressure hose go in the front or back hole in the p/s gearbox?

Thanks, again

cheatham · 07-13-2004, 06:26 PM

ttt

mikeoj · 07-13-2004, 06:42 PM

Assuming you are talking about the gearbox.You really can't get em mixed up.They are different sizes.Front is pressure,back is return.

franko72 · 07-13-2004, 07:10 PM

front is pressure and rear is return. correct mikeOj ,the old lady jumped on the pc while I went outside to check.

cheatham · 07-13-2004, 07:52 PM

Thanks, guys. I appreciate it. Mikeoj, I guess that is why I needed two different wrenches.

07-13-2004, 05:37 PM	#1
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	p/s pressure hose Could someone check real quick, or do you know... does the pressure hose go to the front or back on the power steeriing? Thanks. __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:04 PM	#2
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	my hoses are both connected to the back on my p.s. pump . It may be different because its a big block 72 __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

07-13-2004, 06:06 PM	#3
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Sorry, I didn't say my question very well. I mean does the p/s pressure hose go in the front or back hole in the p/s gearbox? Thanks, again __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:26 PM	#4
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	ttt __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10

07-13-2004, 06:42 PM	#5
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Assuming you are talking about the gearbox.You really can't get em mixed up.They are different sizes.Front is pressure,back is return. __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

07-13-2004, 07:10 PM	#6
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	front is pressure and rear is return. correct mikeOj ,the old lady jumped on the pc while I went outside to check. __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust

07-13-2004, 07:52 PM	#7
cheatham I need a brake! Join Date: Jul 2002 Location: Nashville, TN Posts: 474	Thanks, guys. I appreciate it. Mikeoj, I guess that is why I needed two different wrenches. __________________ JP MEMBER OF THE DISCS UP FRONT CLUB 1971 Chevy C10



Register or Log In To remove these advertisements.