ID 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Willys_MB · 09-27-2021, 04:23 PM

Buyer pays all shipping and fees

C20 Lower Control Arm Shaft - Moog K6147 - I ended up thinking I lost one of the caps and in the middle of a project I ordered a second one. Then when I moved to a new house, I found it. One cap is painted, was test fitted, then "lost." Never torqued, installed, or used. $15+shipping thread closed

C20 Leaf Spring Bushings - Moog SB319 - I learned (the hard way) that the bolt size changed some time between 1968 and 1971. These bushings were pressed in, but never used. I ended up pressing them out because the bolts I was using were bigger than these bushings. This is a full set for a Dana 60 rear end and I put anti-seize on them before pressing them in. $30+shipping SOLD

GMC Headlight Bezels - I should call this the "lessons learned" sale thread. I bought these later style headlight bezels not knowing they wouldn't fit into the 1967/8 grille. Minimal rust, super clean, no issues except for two small dings. $50+shipping thread closed

Items consolidated into another thread. This thread is closed.

Willys_MB · 09-27-2021, 04:25 PM

Lower control arm shaft - Moog K6147

Willys_MB · 09-27-2021, 04:26 PM

Moog SB319 Leaf Spring Bushings - I put anti-seize on them before I pressed them in

michael bustamante · 09-27-2021, 04:30 PM

pics of the bezels

Willys_MB · 09-27-2021, 05:01 PM

GMC Bezels

Willys_MB · 09-27-2021, 05:02 PM

GMC Bezels 2

one small ding on each bezel as shown

Willys_MB · 09-28-2021, 09:24 AM

bump

Willys_MB · 10-05-2021, 01:54 PM

bump - prices lowered and open to reasonable offers

Willys_MB · 10-14-2021, 01:34 PM

Prices dropped - help me clean out my garage!

Willys_MB · 11-04-2021, 05:09 PM

Quote:

Originally Posted by michael bustamante

pics of the bezels

pics posted, still interested?

**LockDoc** · 11-04-2021, 09:24 PM

-
What size is the bolt hole in the bushings.

Thanks,
LockDoc

Willys_MB · 11-05-2021, 04:56 PM

Quote:

Originally Posted by LockDoc

-
What size is the bolt hole in the bushings.

Thanks,
LockDoc

Here are pics of the OD and ID. Looks like the ID is for a 9/16” bolt.

**LockDoc** · 11-06-2021, 07:55 PM

-
Thanks. See what the shipping would be to Montezuma, IA 50171.

LockDoc

Willys_MB · 11-07-2021, 09:31 AM

Quote:

Originally Posted by LockDoc

-
Thanks. See what the shipping would be to Montezuma, IA 50171.

LockDoc

I’ll work on that today/tomorrow. I also have a set of OEM door locks (no keys) I pulled off a junkyard truck. I was gonna sell them, but if you want them I’ll throw them in the box. You’ve helped me out so many times!

Willys_MB · 11-07-2021, 09:51 AM

Quote:

Originally Posted by Willys_MB

I’ll work on that today/tomorrow. I also have a set of OEM door locks (no keys) I pulled off a junkyard truck. I was gonna sell them, but if you want them I’ll throw them in the box. You’ve helped me out so many times!

I’ll dig around. I might actually have two sets…

**LockDoc** · 11-07-2021, 09:53 AM

Quote:

Originally Posted by Willys_MB

I’ll work on that today/tomorrow. I also have a set of OEM door locks (no keys) I pulled off a junkyard truck. I was gonna sell them, but if you want them I’ll throw them in the box. You’ve helped me out so many times!

Sounds good. No hurry on my end.

LockDoc

Willys_MB · 11-09-2021, 03:29 PM

Quote:

Originally Posted by LockDoc

Sounds good. No hurry on my end.

LockDoc

The cheapest shipping option looks to be a small flat rate box through USPS at $9.20.

**LockDoc** · 11-10-2021, 11:41 AM

Quote:

Originally Posted by Willys_MB

The cheapest shipping option looks to be a small flat rate box through USPS at $9.20.

Sounds good. PM me your PP info.

Thanks,
LockDoc

09-27-2021, 04:23 PM	#1
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	GMC Headlight Bezels and 3/4 Ton Control Arm Shaft and Leaf Spring Bushings Buyer pays all shipping and fees C20 Lower Control Arm Shaft - Moog K6147 - I ended up thinking I lost one of the caps and in the middle of a project I ordered a second one. Then when I moved to a new house, I found it. One cap is painted, was test fitted, then "lost." Never torqued, installed, or used. $15+shipping thread closed C20 Leaf Spring Bushings - Moog SB319 - I learned (the hard way) that the bolt size changed some time between 1968 and 1971. These bushings were pressed in, but never used. I ended up pressing them out because the bolts I was using were bigger than these bushings. This is a full set for a Dana 60 rear end and I put anti-seize on them before pressing them in. $30+shipping SOLD GMC Headlight Bezels - I should call this the "lessons learned" sale thread. I bought these later style headlight bezels not knowing they wouldn't fit into the 1967/8 grille. Minimal rust, super clean, no issues except for two small dings. $50+shipping thread closed Items consolidated into another thread. This thread is closed. __________________ 1968 GMC C2500 Long Bed Fleetside Last edited by Willys_MB; 11-10-2021 at 02:49 PM.

09-27-2021, 04:25 PM	#2
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels Lower control arm shaft - Moog K6147 Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

09-27-2021, 04:26 PM	#3
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels Moog SB319 Leaf Spring Bushings - I put anti-seize on them before I pressed them in Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

09-27-2021, 04:30 PM	#4
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,841	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels pics of the bezels __________________ 1967custom

09-27-2021, 05:01 PM	#5
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels GMC Bezels Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

09-27-2021, 05:02 PM	#6
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels GMC Bezels 2 one small ding on each bezel as shown Attached Images __________________ 1968 GMC C2500 Long Bed Fleetside

09-28-2021, 09:24 AM	#7
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels bump __________________ 1968 GMC C2500 Long Bed Fleetside

10-05-2021, 01:54 PM	#8
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels bump - prices lowered and open to reasonable offers __________________ 1968 GMC C2500 Long Bed Fleetside

10-14-2021, 01:34 PM	#9
Willys_MB Registered User Join Date: Apr 2017 Location: Boise, ID Posts: 856	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels Prices dropped - help me clean out my garage! __________________ 1968 GMC C2500 Long Bed Fleetside

11-04-2021, 09:24 PM	#11
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,375	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels - What size is the bolt hole in the bushings. Thanks, LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-06-2021, 07:55 PM	#13
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,375	Re: 3/4 Ton Control Arm Shaft and Leaf Spring Bushings and GMC Headlight Bezels - Thanks. See what the shipping would be to Montezuma, IA 50171. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.