|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-22-2024, 10:39 PM
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
To Locktite or not to Locktite
I put my frame back together with grade 8 hardware, flat washers and lock washers. I wish I would have used nylon lock nuts but I didn't. Should I have used Locktite? This is one of those things that keeps me awake at night when I'm trying to fall asleep. lol
__________________
66 shorty 
|
|
|
|
04-22-2024, 11:13 PM
|
#2 |
|
Senior Member
 
Join Date: Dec 2009
Location: TN.
Posts: 8,320
|
Re: To Locktite or not to Locktite
I thought this process thru/When I was building a frame for a 78 4x4.
I concentrated more on the shoulder of the bolt being long enough. I did not want to use a Full threaded bolt I wanted the shoulder to be in full contact with the frame and the bracket it was going thru. I used Hardened washers to take up the space / (If Any) then a stover / toplock nut. Loctite on this would be a plus.  Hope this helps.
__________________
________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build |
|
|
|
|
04-23-2024, 04:58 PM
|
#3 |
|
Registered User
Join Date: Oct 2012
Location: Philly, PA
Posts: 540
|
Re: To Locktite or not to Locktite
Lock washers and torquing the bolts good and tight should be plenty fine. If you're still losing sleep, check a few bolts after driving a couple hundred miles and see if frame flex has loosened any of them up.
__________________
My truck ain't dead, it just smells funny. |
|
|
|
|
04-23-2024, 06:13 PM
|
#4 |
|
Registered User
Join Date: Sep 2010
Location: los angeles
Posts: 1,134
|
Re: To Locktite or not to Locktite
locktite > all other thread locking methods. Go buy some. redo the fasteners that you worry about....be happy
|
|
|
|
|
04-23-2024, 07:05 PM
|
#5 | |
|
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,129
|
Re: To Locktite or not to Locktite
Quote:
__________________
66 shorty
|
|
|
|
|
|
04-25-2024, 12:18 PM
|
#6 |
|
Registered User
Join Date: Dec 2016
Location: Canon City, Colorado
Posts: 115
|
Re: To Locktite or not to Locktite
Maybe loctite 290.
|
|
|
|
|
04-25-2024, 08:44 PM
|
#7 |
|
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,280
|
Re: To Locktite or not to Locktite
Their is more than one type of Locktite.
I would recommend using the "Blue" service removal type. Last edited by Accelo; 04-26-2024 at 09:33 AM. |
|
|
|
|
04-26-2024, 07:57 AM
|
#8 |
|
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,213
|
Re: To Locktite or not to Locktite
The factory fix on the assembly line for missing or mis-hit rivets was a 3/8" bolt, washer and nut.
They did not use loctite. But - since there is red, and there is blue: a little blue loctite could never hurt. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
|
|
|
|
04-26-2024, 11:13 AM
|
#9 |
|
Senior Member
Join Date: Feb 2010
Location: Lambertville, MI
Posts: 1,861
|
Re: To Locktite or not to Locktite
IMO, me being a machinist, I would use red Loctite. And also if the frame wasn't coming back apart, I would use a crimped style lock nut instead of a Nyloc type. It wouldnt hurt to use a split type lock washer either. Frame stiffness is pretty important. Just my 2 cents.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
