Body Mount HELP!!!!!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71jimmy · 09-24-2004, 05:18 PM

K5KRAZIE, yes it is the part by the rear sill.
GEE_EMM, are both pieces supposed to be spot welded? And yes, it gives the bushing a flat place to sit on since there is like a 3 or 4 inch space between the chassis and the bottom of the floor.

Does any one sell these? Or do I need to manufacture some?

Thanks everyone!

**CUSTOM/10** · 09-24-2004, 08:02 PM

If you look at the Goodmark Industries web site They have a picture of the rear sill, and attached to it looks to be what yiur talking about.
Gary

09-24-2004, 05:18 PM	#1
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	K5KRAZIE, yes it is the part by the rear sill. GEE_EMM, are both pieces supposed to be spot welded? And yes, it gives the bushing a flat place to sit on since there is like a 3 or 4 inch space between the chassis and the bottom of the floor. Does any one sell these? Or do I need to manufacture some? Thanks everyone! __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."

09-24-2004, 08:02 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,797	Rear Sill If you look at the Goodmark Industries web site They have a picture of the rear sill, and attached to it looks to be what yiur talking about. Gary



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.