68' Chevy c10 - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

XxCHEVYMANxX · 05-13-2012, 05:50 PM

Quote:

Originally Posted by mcbassin

Nice progress John, I haven't seen you updating in a while. Rock on!

Thanks Mike, I was laid off at the end of April, so the truck has been on the back burner. I'll keep finding time to work on her though.

Brake line for drivers side finished and installed. I was able to get the passenger side re-routed to the 85's rubber line fitting. still need to mount pass. lines to the X-member.
Name: 100_1176.jpg
Views: 1020
Size: 37.1 KB

Name: 100_1176.jpg
Views: 1020
Size: 37.1 KB

Name: 100_1181.jpg
Views: 1011
Size: 53.8 KB

Name: 100_1183.jpg
Views: 1037
Size: 32.3 KB

Name: 100_1190.jpg
Views: 1002
Size: 59.1 KB

72SWBChevy · 05-13-2012, 09:21 PM

Nice job bending those lines. I would end up making a bunch of useless bent up tubing. Ha.

XxCHEVYMANxX · 06-29-2012, 11:48 AM

Quote:

Originally Posted by 72SWBChevy

Nice job bending those lines. I would end up making a bunch of useless bent up tubing. Ha.

Thanks 72', I just took my time and kept checking the fit till I got it right. I bet you could do the same.

XxCHEVYMANxX · 06-29-2012, 11:54 AM

Here's a little more progress. not really pic worthy stuff, but I take pics of everything. The first two are before and after (new chrome under mount fuel line).
Name: 100_1079.jpg
Views: 1017
Size: 51.7 KB

Name: 100_1079.jpg
Views: 1017
Size: 51.7 KB

Name: 100_1196.jpg
Views: 1008
Size: 54.1 KB

Re-located fuel filter.
Name: 100_1195.jpg
Views: 1033
Size: 46.8 KB

**67cheby** · 06-29-2012, 12:19 PM

you are making some great progress ! motor looks great !

**68 Four on the Floor** · 06-29-2012, 02:10 PM

Lookin good

XxCHEVYMANxX · 07-03-2012, 02:14 PM

Quote:

Originally Posted by 67cheby

you are making some great progress ! motor looks great !

Quote:

Originally Posted by 68 Four on the Floor

Lookin good

Thanks Guys !

XxCHEVYMANxX · 07-03-2012, 06:38 PM

Well the bodywork continues... It's down to the small stuff now at least. here's a few pics.
Name: 100_1200.jpg
Views: 847
Size: 61.0 KB

Name: 100_1203.jpg
Views: 883
Size: 61.0 KB

This is my new to me work truck. I traded an Ice machine for it.

Name: 100_1202.jpg
Views: 891
Size: 84.6 KB

**67cheby** · 07-03-2012, 06:48 PM

looking good and nice swap !

mightymouse · 07-03-2012, 08:10 PM

hey john, truck looking good , and the new work truck also. that must of been a badass ice machine. keep up the good work..jw

XxCHEVYMANxX · 07-17-2012, 01:31 PM

Quote:

Originally Posted by 67cheby

looking good and nice swap !

Quote:

Originally Posted by mightymouse

hey john, truck looking good , and the new work truck also. that must of been a badass ice machine. keep up the good work..jw

Thanks Guys ! and Johnny it was more like bigass ice machine

XxCHEVYMANxX · 07-17-2012, 01:36 PM

More pics of the body work still continuing....Y'all know what I mean.
Name: 100_1206.jpg
Views: 849
Size: 41.4 KB

Name: 100_1211.jpg
Views: 843
Size: 47.8 KB

Name: 100_1212.jpg
Views: 844
Size: 35.4 KB

Name: 100_1208.jpg
Views: 845
Size: 23.9 KB

And Oh yeah I forgot about the crack on the inside of driver door, getting fixed now.

Name: 100_1216.jpg
Views: 847
Size: 36.6 KB

longbed67 · 07-17-2012, 02:01 PM

Nice work on the fender! It was pretty smashed up in the corner! Looks like I got some catching up to do!

72SWBChevy · 07-17-2012, 03:33 PM

Moving right along, looking good. Keep sanding, it all pays off!!!

XxCHEVYMANxX · 07-17-2012, 06:49 PM

Welded the crack in the door. My neighbor had Central Air problems so I had to help him out. It's way to hot to be without AC.
Name: 100_1222.jpg
Views: 847
Size: 33.4 KB

Name: 100_1222.jpg
Views: 847
Size: 33.4 KB

XxCHEVYMANxX · 07-17-2012, 06:53 PM

Quote:

Originally Posted by longbed67

Nice work on the fender! It was pretty smashed up in the corner! Looks like I got some catching up to do!

Quote:

Originally Posted by 72SWBChevy

Moving right along, looking good. Keep sanding, it all pays off!!!

Thanks Guys ! That fender was smashed, but it turned out ok. And 72SWB sanding is like a four letter word....

72SWBChevy · 07-20-2012, 12:17 PM

Quote:

Originally Posted by XxCHEVYMANxX

Thanks Guys ! That fender was smashed, but it turned out ok. And 72SWB sanding is like a four letter word....

I hear ya!!!! Been there!!!

Officer68 · 07-20-2012, 12:25 PM

my drivers door has nearly the same crack, same spot. Im guessing this must me common on our trucks? repair looks good. I just need to get mine done now......

XxCHEVYMANxX · 07-25-2012, 03:25 PM

Quote:

Originally Posted by Officer68

my drivers door has nearly the same crack, same spot. Im guessing this must me common on our trucks? repair looks good. I just need to get mine done now......

Thanks Officer68, Dont know if its common or not. Now get yours done

XxCHEVYMANxX · 07-25-2012, 03:33 PM

More progress ! finished bodywork on the crack repair and some dents on the lower inside panel. seam sealed also.
Name: 100_1225.jpg
Views: 784
Size: 25.8 KB

Name: 100_1225.jpg
Views: 784
Size: 25.8 KB

Name: 100_1226.jpg
Views: 780
Size: 37.4 KB

Name: 100_1227.jpg
Views: 783
Size: 26.5 KB

Pass. door is overall the same shape the driver side was in minus the crack. Funny the stuff you find inside the body's of these classics.
Name: 100_1228.jpg
Views: 781
Size: 38.4 KB

Name: 100_1228.jpg
Views: 781
Size: 38.4 KB

Name: 100_1229.jpg
Views: 780
Size: 36.7 KB

Houch · 07-25-2012, 05:00 PM

Looking good John.
Posted via Mobile Device

longbed67 · 07-25-2012, 11:44 PM

Finding stuff in the bodies is always cool, its kinda like a photograph into the past!

67chevy1series · 07-26-2012, 12:45 AM

oh i know about that! i found every nut know to man in my old cab! crazy stuff... its also what you find out about the cab when your tearing it apart!

XxCHEVYMANxX · 08-06-2012, 02:54 PM

Quote:

Originally Posted by Houch

Looking good John.
Posted via Mobile Device

Thanks Greg

Quote:

Originally Posted by longbed67

Finding stuff in the bodies is always cool, its kinda like a photograph into the past!

Quote:

Originally Posted by 67chevy1series

oh i know about that! i found every nut know to man in my old cab! crazy stuff... its also what you find out about the cab when your tearing it apart!

Most of the time it's nothing you can use, this time I have a wrench to add to the toolbox.

XxCHEVYMANxX · 08-06-2012, 02:59 PM

Some progress on the pass. door.
Name: 100_1231.jpg
Views: 709
Size: 50.0 KB

Name: 100_1233.jpg
Views: 707
Size: 42.7 KB

and final fill of gauge face.
Name: 100_1234.jpg
Views: 704
Size: 34.4 KB

Name: 100_1235.jpg
Views: 698
Size: 39.9 KB

05-13-2012, 09:21 PM	#227
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 68' Chevy c10 Nice job bending those lines. I would end up making a bunch of useless bent up tubing. Ha. __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

06-29-2012, 11:54 AM	#229
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 Here's a little more progress. not really pic worthy stuff, but I take pics of everything. The first two are before and after (new chrome under mount fuel line). Re-located fuel filter. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

06-29-2012, 12:19 PM	#230
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68' Chevy c10 you are making some great progress ! motor looks great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-29-2012, 02:10 PM	#231
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: 68' Chevy c10 Lookin good

07-03-2012, 06:38 PM	#233
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 Well the bodywork continues... It's down to the small stuff now at least. here's a few pics. This is my new to me work truck. I traded an Ice machine for it. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

07-03-2012, 06:48 PM	#234
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 68' Chevy c10 looking good and nice swap ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-03-2012, 08:10 PM	#235
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: 68' Chevy c10 hey john, truck looking good , and the new work truck also. that must of been a badass ice machine. keep up the good work..jw

07-17-2012, 01:36 PM	#237
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 More pics of the body work still continuing....Y'all know what I mean. And Oh yeah I forgot about the crack on the inside of driver door, getting fixed now. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

07-17-2012, 02:01 PM	#238
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 68' Chevy c10 Nice work on the fender! It was pretty smashed up in the corner! Looks like I got some catching up to do! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

07-17-2012, 03:33 PM	#239
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 68' Chevy c10 Moving right along, looking good. Keep sanding, it all pays off!!! __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595

07-17-2012, 06:49 PM	#240
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 Welded the crack in the door. My neighbor had Central Air problems so I had to help him out. It's way to hot to be without AC. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

07-20-2012, 12:25 PM	#243
Officer68 Registered User Join Date: Aug 2011 Location: Lewis center, ohio Posts: 32	Re: 68' Chevy c10 my drivers door has nearly the same crack, same spot. Im guessing this must me common on our trucks? repair looks good. I just need to get mine done now......

07-25-2012, 03:33 PM	#245
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 More progress ! finished bodywork on the crack repair and some dents on the lower inside panel. seam sealed also. Pass. door is overall the same shape the driver side was in minus the crack. Funny the stuff you find inside the body's of these classics. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

07-25-2012, 05:00 PM	#246
Houch Time Machine Join Date: Oct 2009 Location: Sedgewickville Mo. Posts: 92	Re: 68' Chevy c10 Looking good John. Posted via Mobile Device __________________ Greg 1970 Chevy SWB http://67-72chevytrucks.com/vboard//...d.php?t=390588

07-25-2012, 11:44 PM	#247
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: 68' Chevy c10 Finding stuff in the bodies is always cool, its kinda like a photograph into the past! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706



Register or Log In To remove these advertisements.

07-26-2012, 12:45 AM	#248
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 68' Chevy c10 oh i know about that! i found every nut know to man in my old cab! crazy stuff... its also what you find out about the cab when your tearing it apart!

08-06-2012, 02:59 PM	#250
XxCHEVYMANxX Registered User Join Date: Oct 2010 Location: Decatur, IL. Posts: 628	Re: 68' Chevy c10 Some progress on the pass. door. and final fill of gauge face. __________________ *John* Mild Custom 68' Work Truck Build Facebook LoL 1977 Trans Am (Project) 1965 Chevelle (Project)

Register or Log In To remove these advertisements.