The 6.0 Silverado Build - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

menace121978 · 03-26-2010, 09:06 AM

i'll call you this morning sunshine!

STOCKISH · 03-26-2010, 09:53 AM

Quote:

Originally Posted by menace121978

same here... good chatting with ya! i mailed the fuel pipe fitting off today @1pm. 1st class usps. will be at your door monday!

hey Bob, Josh has your -an fittings now!

Thanks Dennis. Much appreciated and 100 imaginary rep points to you my friend.

menace121978 · 03-26-2010, 10:05 AM

anytime buddy!

i'm just glad i dont live out there and happen to be looking for a fuel rail!!!

STOCKISH · 03-26-2010, 12:48 PM

shhhhhhhh!

STOCKISH · 03-28-2010, 04:02 PM

OK, got the truck manifolds cleaned, painted and installed. Fit like a glove. Got the power steering lines re routed and hooked up. Used a fitting from an old pump (thanks to a generous board member who had an extra)and put it in the back of the 6.0s pump for the pressure line. Also got the trucks OE harness (or whats left of it) stripped down to a minimun and routed out of site to the starter, and oil press. sender and wrapped in the split loom. Still waiting on the F6 wrap for the rest of the harness. Once it gets here I'll wrap the engine harness and mount the computer and hook her all up. Once thats done I'll hit it with some throttle body cleaner just to hear her run until I get time to take it to the shop and remove the bed and do the fuel system how I want. I already have ALL the parts so it stinks waiting on time to finish it. Guess being busy at work is a good problem to have. Heres some pics before John says something!

VA72C10 · 03-28-2010, 04:23 PM

looking good!!!

buckshot305 · 03-28-2010, 06:23 PM

Great work! I got a couple questions for you. Are you running the 6.0's clutch fan or e fans? If your running the clutch fan, were there any clearance issues with the c10's fan shroud? Also, its hard to tell in the last set of pictures, but are you running the A/C compressor? Were there any clearance issues?

Nevermind - i just answered both my questions by looking closer. Sorry

menace121978 · 03-28-2010, 09:27 PM

SWEET!!! nice job Josh! sure looks good in there. did you have to notch the frame rail for the manifold on the pass. side? cant even tell in the pics...

STOCKISH · 03-28-2010, 10:49 PM

I will just to be safe. It's not touching right now but it's darn close. Thanks for all the compliments guys.

85burb · 03-28-2010, 11:58 PM

Did the factory manifold fit good on passenger side?

menace121978 · 03-29-2010, 12:22 AM

thats what we were talking about. it fits really good but is SUPER close to the frame rail at the collector area.

79gmc5.3 · 03-29-2010, 06:20 AM

Man your close now. Can't wait to se the start up video

Jonboy · 03-29-2010, 09:08 AM

Looks great. How long until it is going?

silvereagle07 · 03-29-2010, 12:06 PM

Quote:

Originally Posted by 79gmc5.3

Man your close now. Can't wait to se the start up video

Looks great Josh.

STOCKISH · 03-29-2010, 02:00 PM

Thanks fellas.

Driveway Dreams · 03-30-2010, 12:06 AM

B
E
A
Utiful
Looks great Josh. I will PM you my number, just because. I might as well have people from the board to talk to in all ends of the US.

STOCKISH · 03-30-2010, 04:48 PM

Well if time allows tonight after my youngin goes to bed I am going to try to wrap and install my harness and maybe here it FIRE tonight!!! If it does it'll just be off carb cleaner but better than nothing. Heres hoping.

**nlped** · 03-30-2010, 05:18 PM

Good Luck!!!

JohnC · 03-30-2010, 08:48 PM

Looks awesome man.

menace121978 · 03-30-2010, 10:26 PM

well..... Did she fire?

STOCKISH · 03-30-2010, 10:48 PM

No fire tonight fellas. I did have time to wrap my harness and lengthen all the wires I needed to so I could route the harness where I wanted to. My girl was the best helper I could have asked for. She sat there all night and helped me solder and shrink wrap the whole thing! I am very impressed with the harness wrap. It's called F6 wrap if anyone wants to Google it. Heres the link to where I bought the stuff if anyone wants some. Here is the final product.

http://www.wirelm.com/page_1.html

menace121978 · 03-30-2010, 10:53 PM

looks really good Josh!

did you get the "f6 kit"? and are you routing everything in the cab or on the inner fender? hope mine looks that clean!!

menace121978 · 03-30-2010, 10:55 PM

oh yea, just wondering do you have to use the van's coolant reservoir? and how did you do your tranny cooler lines?

STOCKISH · 03-30-2010, 11:27 PM

I did get the F6 kit and added 6 feet of 2 inch to do the main section of the harness. I should have got 1 1/2" because the 2 inch was too big. I havent hooked up the trans cooler lines yet but I am actually thinking of just hooking them into the factory cooler on the radiator. I am not sure yet though.

STOCKISH · 03-30-2010, 11:29 PM

Quote:

Originally Posted by menace121978

oh yea, just wondering do you have to use the van's coolant reservoir? and how did you do your tranny cooler lines?

Silly question, why would I have to use the vans reservoir? Didnt know if there was something I'm not thinking about. I am just using the factory 86 reservoir now.

03-26-2010, 09:06 AM	#226
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build i'll call you this morning sunshine! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-26-2010, 10:05 AM	#228
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build anytime buddy! i'm just glad i dont live out there and happen to be looking for a fuel rail!!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-26-2010, 12:48 PM	#229
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build shhhhhhhh! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-28-2010, 04:02 PM	#230
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build OK, got the truck manifolds cleaned, painted and installed. Fit like a glove. Got the power steering lines re routed and hooked up. Used a fitting from an old pump (thanks to a generous board member who had an extra)and put it in the back of the 6.0s pump for the pressure line. Also got the trucks OE harness (or whats left of it) stripped down to a minimun and routed out of site to the starter, and oil press. sender and wrapped in the split loom. Still waiting on the F6 wrap for the rest of the harness. Once it gets here I'll wrap the engine harness and mount the computer and hook her all up. Once thats done I'll hit it with some throttle body cleaner just to hear her run until I get time to take it to the shop and remove the bed and do the fuel system how I want. I already have ALL the parts so it stinks waiting on time to finish it. Guess being busy at work is a good problem to have. Heres some pics before John says something! Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-28-2010, 04:23 PM	#231
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: The 6.0 Silverado Build looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-28-2010, 06:23 PM	#232
buckshot305 Registered User Join Date: Aug 2009 Location: Suwanee, GA Posts: 55	Re: The 6.0 Silverado Build Great work! I got a couple questions for you. Are you running the 6.0's clutch fan or e fans? If your running the clutch fan, were there any clearance issues with the c10's fan shroud? Also, its hard to tell in the last set of pictures, but are you running the A/C compressor? Were there any clearance issues? Nevermind - i just answered both my questions by looking closer. Sorry Last edited by buckshot305; 03-28-2010 at 06:26 PM.

03-28-2010, 09:27 PM	#233
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build SWEET!!! nice job Josh! sure looks good in there. did you have to notch the frame rail for the manifold on the pass. side? cant even tell in the pics... __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-28-2010, 10:49 PM	#234
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build I will just to be safe. It's not touching right now but it's darn close. Thanks for all the compliments guys. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-28-2010, 11:58 PM	#235
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: The 6.0 Silverado Build Did the factory manifold fit good on passenger side? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

03-29-2010, 12:22 AM	#236
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build thats what we were talking about. it fits really good but is SUPER close to the frame rail at the collector area. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-29-2010, 06:20 AM	#237
79gmc5.3 6.0L power......... Join Date: Dec 2009 Location: Acworth GA Posts: 292	Re: The 6.0 Silverado Build Man your close now. Can't wait to se the start up video __________________ What ever the mind of man can conceive......... he can achieve! My built thread http://67-72chevytrucks.com/vboard/s...d.php?t=375914 1979 GMC Sierra 6.0 L 4L60E 1995 Mustang GT 347

03-29-2010, 09:08 AM	#238
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: The 6.0 Silverado Build Looks great. How long until it is going? __________________ 1974 Jimmy- 5.3/4L80e/NP241

03-29-2010, 02:00 PM	#240
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Thanks fellas. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-30-2010, 12:06 AM	#241
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: The 6.0 Silverado Build B E A Utiful Looks great Josh. I will PM you my number, just because. I might as well have people from the board to talk to in all ends of the US. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

03-30-2010, 04:48 PM	#242
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build Well if time allows tonight after my youngin goes to bed I am going to try to wrap and install my harness and maybe here it FIRE tonight!!! If it does it'll just be off carb cleaner but better than nothing. Heres hoping. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.



Register or Log In To remove these advertisements.

03-30-2010, 05:18 PM	#243
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: The 6.0 Silverado Build Good Luck!!! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

03-30-2010, 08:48 PM	#244
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: The 6.0 Silverado Build Looks awesome man.

03-30-2010, 10:26 PM	#245
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build well..... Did she fire? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-30-2010, 10:48 PM	#246
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build No fire tonight fellas. I did have time to wrap my harness and lengthen all the wires I needed to so I could route the harness where I wanted to. My girl was the best helper I could have asked for. She sat there all night and helped me solder and shrink wrap the whole thing! I am very impressed with the harness wrap. It's called F6 wrap if anyone wants to Google it. Heres the link to where I bought the stuff if anyone wants some. Here is the final product. http://www.wirelm.com/page_1.html Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-30-2010, 10:53 PM	#247
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build looks really good Josh! did you get the "f6 kit"? and are you routing everything in the cab or on the inner fender? hope mine looks that clean!! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-30-2010, 10:55 PM	#248
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: The 6.0 Silverado Build oh yea, just wondering do you have to use the van's coolant reservoir? and how did you do your tranny cooler lines? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

03-30-2010, 11:27 PM	#249
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: The 6.0 Silverado Build I did get the F6 kit and added 6 feet of 2 inch to do the main section of the harness. I should have got 1 1/2" because the 2 inch was too big. I havent hooked up the trans cooler lines yet but I am actually thinking of just hooking them into the factory cooler on the radiator. I am not sure yet though. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.