What did you do to your truck today? Chapter II - Page 119 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ole dollor · 12-03-2015, 08:05 PM

Quote:

Originally Posted by chevytoban

Hi all...newbie here. first post or reply, not really sure what I'm doing yet.LOL
We have a 69 GMC 910 that we are working on (my 2 boys and I) long bed. Just have the box off along with shocks and springs and are coating the frame etc with POR 15 and lowering it 3"in the rear and 1" in the front. I want to install a rear sway bar and eventually a front. Still have drums all around and will get to that another time when we have the money. Question is what do I need to do this properly and what is the best way. I want to start with the rear first. I have a 400 SBC with a gear vendor overdive with a one piece drive shaft already installed I understand that I can use a rear sway bar assembly from a 95 -96 Camaro any help with this would be greatly appreciated. Thanks in advance

welcome from West Texas ,glad to see you and your boys will be working on this together . a life time of memories ......can't get any better than that....Don

wreckedchevy · 12-03-2015, 08:15 PM

getting closer, the innards are painted just have to reassemble everything but it's bowling night so have to wait til tomorrow (hopefully)

BugzC10 · 12-03-2015, 08:24 PM

Quote:

Originally Posted by blake's first

Stopped by Marquez Design last week to pick up a radiator close out panel as a gift to tod that built my small block .. So I dropped it off to him I think he likes it..Attachment 1472569

I tried looking that up on their site...no luck. What's the part number?

firedemon · 12-03-2015, 08:37 PM

I did my Harley emblems like that yours look great

**FIREBALL** · 12-04-2015, 12:15 AM

Quote:

Originally Posted by XwalkerX

is that pump mounted in the jug?

what was that from?

I need a new washer pump for my 72

Yes it's from the 88-94 style c/k 1500 trucks I like them better than the s-10 style cause the pump is in the back instead of the s-10 (located on the front plus the c/k's hold a lot more washer fluid too... Main thing is I got the pump out from under the dash and like this style better?

And those Cheyenne and superglide emblems look awesome.....

**FIREBALL** · 12-04-2015, 12:20 AM

Quote:

Originally Posted by chevytoban

Hi all...newbie here. first post or reply, not really sure what I'm doing yet.LOL
We have a 69 GMC 910 that we are working on (my 2 boys and I) long bed. Just have the box off along with shocks and springs and are coating the frame etc with POR 15 and lowering it 3"in the rear and 1" in the front. I want to install a rear sway bar and eventually a front. Still have drums all around and will get to that another time when we have the money. Question is what do I need to do this properly and what is the best way. I want to start with the rear first. I have a 400 SBC with a gear vendor overdive with a one piece drive shaft already installed I understand that I can use a rear sway bar assembly from a 95 -96 Camaro any help with this would be greatly appreciated. Thanks in advance

Welcome to the site this place is awesome and all the people here are great too.... I'm interested as well on the rear 4th gen Camaro sway bar cause if that's true I got one that I'll install on my 71 as well ......

chevytoban · 12-04-2015, 07:12 PM

Thanks for the welcomes, this site is great. I found a picture on this site of what it looks like and how it was done. http://67-72chevytrucks.com/vboard/s...d.php?t=334003 Just have to find an older Camaro now.

vidman · 12-04-2015, 08:36 PM

stopped by the guy thats doing my interior and snapped some pics..should get the cab back by next week..

Possmguts · 12-05-2015, 08:22 PM

Quote:

Originally Posted by vidman

stopped by the guy thats doing my interior and snapped some pics..should get the cab back by next week..

Looks real nice.. but I have a question for you. Do those thick back seats put you too close to the wheel and cramp your legs any?

Possmguts · 12-05-2015, 08:30 PM

Not much.. just got the inside of the cab under primer. Hope the weather is nice enough tomorrow to drag it out side to get it set on the frame so i can roll it and the frame back in the garage.

vidman · 12-05-2015, 09:18 PM

Quote:

Originally Posted by Possmguts

Looks real nice.. but I have a question for you. Do those thick back seats put you too close to the wheel and cramp your legs any?

I bolted them down and had them powered up with the column in and for me at 5'9", I have plenty of room..

Andy4639 · 12-05-2015, 09:23 PM

Quote:

Originally Posted by vidman

stopped by the guy thats doing my interior and snapped some pics..should get the cab back by next week..

I'm really liking the door panels. Those look great. I want to do something with mine this winter just haven't figured out what yet!

ekgguy · 12-05-2015, 09:37 PM

Quote:

Originally Posted by vidman

I bolted them down and had them powered up with the column in and for me at 5'9", I have plenty of room..

Are those newer chevy seats that have been cut down?

Possmguts · 12-05-2015, 09:47 PM

Quote:

Originally Posted by vidman

I bolted them down and had them powered up with the column in and for me at 5'9", I have plenty of room..

Good to know.. Im 5' 9" also and I bought a set of brand new buckets for a Vibe... They are a little thinner in back so I should be good.. havnt got as far as making mounts for them yet though.. Once I get the cab back on the frame Ill get to that.

Thanks

wreckedchevy · 12-06-2015, 03:59 PM

getting close

Possmguts · 12-06-2015, 04:36 PM

Got the cab put back in its place... Im happy for now. I see progress once again.

vidman · 12-06-2015, 05:45 PM

Quote:

Originally Posted by Possmguts

Got the cab put back in its place... Im happy for now. I see progress once again.

Looking good...looking real good.. takes a lot of work too make it look like that Good job..

vidman · 12-06-2015, 05:48 PM

Pulled the bed off again to make room for my cab that i will get back sometime next week..

slowcpe · 12-06-2015, 05:54 PM

Finished stripping and cleaning the front frame. Ready for some Porterbuilt parts.

Name: image.jpg
Views: 533
Size: 37.6 KB

Possmguts · 12-06-2015, 06:11 PM

Quote:

Originally Posted by vidman

Pulled the bed off again to make room for my cab that i will get back sometime next week..

That black looks amazing... Love the lift system you got going on there... That would make life so much more gooder in my garage!

vidman · 12-06-2015, 06:41 PM

When i built the garage in 1984 i made sure there was a steel beam holding up the second floor..Its a 18" I-beam 26' long with two 2 ton trollys on it. And i use them most every day..

Possmguts · 12-06-2015, 07:22 PM

Quote:

Originally Posted by vidman

When i built the garage in 1984 i made sure there was a steel beam holding up the second floor..Its a 18" I-beam 26' long with two 2 ton trollys on it. And i use them most every day..

Very smart move indeed. I never got to build the shop i wanted out back when I built this house in 2000. Ive been stuck cramped up in the 2 1/2 attached garage doing my truck... Its like working in the stone ages..

JG67 · 12-06-2015, 10:20 PM

Quote:

Originally Posted by Possmguts

Got the cab put back in its place... Im happy for now. I see progress once again.

Nice build thread. Following...

zellway · 12-07-2015, 10:03 AM

Not much to report. Did get a new gauge set installed in my old work truck. The blue LED's make the rest of the lights look dull so that's the next update for this old truck.

Mator · 12-07-2015, 10:04 AM

Busy weekend, first installed the dash lights with LEDs. Wow what a difference. Then I was able to install my new diamond plate and paint my trucks bedroom. Now for some decorations. LOL

12-03-2015, 08:15 PM	#2952
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: What did you do to your truck today? Chapter II getting closer, the innards are painted just have to reassemble everything but it's bowling night so have to wait til tomorrow (hopefully) __________________ 1969 Chevy C10 2wd stepside longbox

12-03-2015, 08:37 PM	#2954
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: What did you do to your truck today? Chapter II I did my Harley emblems like that yours look great Attached Images

12-04-2015, 07:12 PM	#2957
chevytoban Registered User Join Date: Nov 2015 Location: Winnipeg, Manitoba, Canada Posts: 5	Re: What did you do to your truck today? Chapter II Thanks for the welcomes, this site is great. I found a picture on this site of what it looks like and how it was done. http://67-72chevytrucks.com/vboard/s...d.php?t=334003 Just have to find an older Camaro now.

12-04-2015, 08:36 PM	#2958
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II stopped by the guy thats doing my interior and snapped some pics..should get the cab back by next week.. Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

12-05-2015, 08:30 PM	#2960
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II Not much.. just got the inside of the cab under primer. Hope the weather is nice enough tomorrow to drag it out side to get it set on the frame so i can roll it and the frame back in the garage. __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-06-2015, 03:59 PM	#2965
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: What did you do to your truck today? Chapter II getting close __________________ 1969 Chevy C10 2wd stepside longbox

12-06-2015, 04:36 PM	#2966
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II Got the cab put back in its place... Im happy for now. I see progress once again. Attached Images __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-06-2015, 05:48 PM	#2968
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II Pulled the bed off again to make room for my cab that i will get back sometime next week.. Attached Images __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

12-06-2015, 05:54 PM	#2969
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: What did you do to your truck today? Chapter II Finished stripping and cleaning the front frame. Ready for some Porterbuilt parts. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-06-2015, 06:41 PM	#2971
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: What did you do to your truck today? Chapter II When i built the garage in 1984 i made sure there was a steel beam holding up the second floor..Its a 18" I-beam 26' long with two 2 ton trollys on it. And i use them most every day.. __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

12-07-2015, 10:03 AM	#2974
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: What did you do to your truck today? Chapter II Not much to report. Did get a new gauge set installed in my old work truck. The blue LED's make the rest of the lights look dull so that's the next update for this old truck. Attached Images __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

12-07-2015, 10:04 AM	#2975
Mator Registered User Join Date: Jan 2013 Location: Clinton Iowa Posts: 337	Re: What did you do to your truck today? Chapter II Busy weekend, first installed the dash lights with LEDs. Wow what a difference. Then I was able to install my new diamond plate and paint my trucks bedroom. Now for some decorations. LOL Attached Images __________________ Build sheet http://67-72chevytrucks.com/vboard/s....php?p=7277491



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.