1980 Stepside Build... My first build thread - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevDog1 · 12-31-2014, 05:47 PM

OK - tough question for those of you who have been following my build...

When I bought this truck, I wanted it mainly for the project. Cars are a hobby of mine, and I just enjoy working on them and fixing them up. I may end up selling this truck once it is done, and I have had a chance to drive it and play with it a bit. I have been looking online for comparable trucks to get an idea what it might be worth, but haven't found anything that is close enough for me to get pricing ideas.

So what I am asking for is opinions from guys with square bodies - what do you think my truck is worth? If you were selling a truck like mine, what kind of a [price tag would you put on it? When I sold my Blazer (the teal green one) back in the 90's, it sold in the first day of the ad, and the phone rang off the hook for weeks afterwards. I obviously let it go for too little and would hate to make that mistake again.

I appreciate any input. Thanks.

UKNOWME · 01-01-2015, 10:54 PM

What more will be done before you plan to sell it?

naphtali5725 · 01-02-2015, 02:11 AM

great truck, thanks for sharing the buildup, nice work!
I've been building my truck almost 3 years… I never plan on selling mine

Good luck with the sale...

ChevDog1 · 01-02-2015, 01:40 PM

Quote:

Originally Posted by UKNOWME

What more will be done before you plan to sell it?

Just a bunch of little details. No major mods. Stuff like replacing the heater core, fine tuning the ride height, etc...

UKNOWME · 01-03-2015, 12:32 AM

Then I think it's an 8 grand truck.

ChevDog1 · 01-03-2015, 12:34 AM

Thanks for the input!

ChevDog1 · 01-04-2015, 01:53 AM

Got the new heater core and blower fan installed today. I now have heat!

Also cut off the rear half of my bottom leaf springs, so I now have 2.5 leaves per side, a 3/4" block (pinned to the leaves like a zero rate spring), and of course my axle flip. Finally got the ride height where I want it, and a pretty decent ride.

ChevDog1 · 01-04-2015, 01:54 AM

It's dirty, because I have been driving it!

ChevDog1 · 01-04-2015, 01:55 AM

I also have the new front tires on in today's pics.

ChevDog1 · 01-04-2015, 02:23 AM

Thanks!

green72s · 01-04-2015, 02:30 AM

Looks great. I really like the stance, the rally wheels, the color combination (blue and saddle), and the early style grill.

ChevDog1 · 01-04-2015, 02:30 PM

Quote:

Originally Posted by green72s

Looks great. I really like the stance, the rally wheels, the color combination (blue and saddle), and the early style grill.

Thank you. I'm really happy with the way the colors turned out. Just not sure if the wheels are doing it for me. I'm tempted to try painting them white. What I would really like is a set of standard steelies with dog dish caps, but I may just try shooting these white and see what I think first. Easy to put them back to silver if I don't like it.

ChevDog1 · 01-04-2015, 08:14 PM

Got a little more done today. Finally installed my custom grille emblem!

ChevDog1 · 01-04-2015, 08:17 PM

And a close up. To my knowledge, the six cyl trucks didn't have an engine displacement emblem in the grille (at least I couldn't find one). So I ground off the 454 from the emblem that came with my grille, and cut up an emblem from an Econoline van to make my own.

ChevDog1 · 01-04-2015, 08:21 PM

I also finally got around to installing a manual choke. Since my carb came from a V8, and was originally equipped with a divorced choke - it was really my only option. Ran a cable through to the dash and now just have a small black choke knob. Didn't take any pics, but it came out looking pretty clean. Can't hardly see it against the black instrument bezel.

I also spent a couple of hours working on heating and molding the rubber floor liner to fit. Not perfect yet, but looks much smoother. I was able to remove most of the shipping creases.

ChevDog1 · 01-04-2015, 09:44 PM

I just went out and snapped some pics in the dark for you. Here is an overall shot of the carb.

ChevDog1 · 01-04-2015, 09:45 PM

Close up of linkage at carb

ChevDog1 · 01-04-2015, 09:47 PM

Here's where the cable comes thru the firewall

ChevDog1 · 01-04-2015, 09:51 PM

The choke knob is the black circle to the right of the headlight switch. The trim piece it's mounted in is broken and doesn't fit correctly, so I need to replace it.

ChevDog1 · 01-04-2015, 09:57 PM

I forgot to mention that I also figured out why my reverse lights didn't work. When the PO swapped columns for the auto trans, he just didn't plug them back in! 20 second fixes are the best!

While I was under the dash, I also figured out why it will start in any gear. Instead of plugging in the neutral safety switch, he cut off the plug and spliced the wires together! It should be a quick and easy fix also, but I was cold and wanted to come inside and sit by the fire.

UKNOWME · 01-04-2015, 11:49 PM

Man I'm jealous. It's a badass truck

ChevDog1 · 01-05-2015, 12:30 AM

Quote:

Originally Posted by UKNOWME

Man I'm jealous. It's a badass truck

Thank you very much. I appreciate the kudos. It probably looks better in photos than in person, but I am happy with the way it is turning out.

ChevDog1 · 01-05-2015, 12:40 AM

Quote:

Originally Posted by UKNOWME

Man I'm jealous. It's a badass truck

I think I'm going to be jealous of your 80 when its done. Waiting for an update to that thread...

UKNOWME · 01-05-2015, 01:55 AM

Quote:

Originally Posted by ChevDog1

I think I'm going to be jealous of your 80 when its done. Waiting for an update to that thread...

Yeah I'm waiting on an update too, lol
Been sidetracked and lost motivation. Need to get on it though!

Low Elco · 01-06-2015, 02:05 PM

Looks fantastic. Glad you're enjoying it.

12-31-2014, 05:47 PM	#301
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread OK - tough question for those of you who have been following my build... When I bought this truck, I wanted it mainly for the project. Cars are a hobby of mine, and I just enjoy working on them and fixing them up. I may end up selling this truck once it is done, and I have had a chance to drive it and play with it a bit. I have been looking online for comparable trucks to get an idea what it might be worth, but haven't found anything that is close enough for me to get pricing ideas. So what I am asking for is opinions from guys with square bodies - what do you think my truck is worth? If you were selling a truck like mine, what kind of a [price tag would you put on it? When I sold my Blazer (the teal green one) back in the 90's, it sold in the first day of the ad, and the phone rang off the hook for weeks afterwards. I obviously let it go for too little and would hate to make that mistake again. I appreciate any input. Thanks.

01-01-2015, 10:54 PM	#302
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 1980 Stepside Build... My first build thread What more will be done before you plan to sell it? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-02-2015, 02:11 AM	#303
naphtali5725 Registered User Join Date: Mar 2012 Location: NC Posts: 1,101	Re: 1980 Stepside Build... My first build thread great truck, thanks for sharing the buildup, nice work! I've been building my truck almost 3 years… I never plan on selling mine Good luck with the sale... __________________ My build thread... http://67-72chevytrucks.com/vboard/s...d.php?t=515829 Disabled Veteran 82nd Airborne Division Operations: Desert Shield, Desert Storm, and Uphold Democracy

01-03-2015, 12:32 AM	#305
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 1980 Stepside Build... My first build thread Then I think it's an 8 grand truck. __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-03-2015, 12:34 AM	#306
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Thanks for the input!

01-04-2015, 01:53 AM	#307
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Got the new heater core and blower fan installed today. I now have heat! Also cut off the rear half of my bottom leaf springs, so I now have 2.5 leaves per side, a 3/4" block (pinned to the leaves like a zero rate spring), and of course my axle flip. Finally got the ride height where I want it, and a pretty decent ride. Attached Images

01-04-2015, 01:54 AM	#308
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread It's dirty, because I have been driving it! Attached Images

01-04-2015, 01:55 AM	#309
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread I also have the new front tires on in today's pics. Attached Images

01-04-2015, 02:23 AM	#310
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Thanks!

01-04-2015, 02:30 AM	#311
green72s Registered User Join Date: Dec 2006 Location: Tempe, Arizona Posts: 100	Re: 1980 Stepside Build... My first build thread Looks great. I really like the stance, the rally wheels, the color combination (blue and saddle), and the early style grill.

01-04-2015, 08:14 PM	#313
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Got a little more done today. Finally installed my custom grille emblem! Attached Images

01-04-2015, 08:17 PM	#314
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread And a close up. To my knowledge, the six cyl trucks didn't have an engine displacement emblem in the grille (at least I couldn't find one). So I ground off the 454 from the emblem that came with my grille, and cut up an emblem from an Econoline van to make my own. Attached Images

01-04-2015, 08:21 PM	#315
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread I also finally got around to installing a manual choke. Since my carb came from a V8, and was originally equipped with a divorced choke - it was really my only option. Ran a cable through to the dash and now just have a small black choke knob. Didn't take any pics, but it came out looking pretty clean. Can't hardly see it against the black instrument bezel. I also spent a couple of hours working on heating and molding the rubber floor liner to fit. Not perfect yet, but looks much smoother. I was able to remove most of the shipping creases.

01-04-2015, 09:44 PM	#316
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread I just went out and snapped some pics in the dark for you. Here is an overall shot of the carb. Attached Images

01-04-2015, 09:45 PM	#317
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Close up of linkage at carb Attached Images



Register or Log In To remove these advertisements.

01-04-2015, 09:47 PM	#318
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread Here's where the cable comes thru the firewall Attached Images

01-04-2015, 09:51 PM	#319
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread The choke knob is the black circle to the right of the headlight switch. The trim piece it's mounted in is broken and doesn't fit correctly, so I need to replace it. Attached Images

01-04-2015, 09:57 PM	#320
ChevDog1 Registered User Join Date: Aug 2013 Location: Banks, OR Posts: 497	Re: 1980 Stepside Build... My first build thread I forgot to mention that I also figured out why my reverse lights didn't work. When the PO swapped columns for the auto trans, he just didn't plug them back in! 20 second fixes are the best! While I was under the dash, I also figured out why it will start in any gear. Instead of plugging in the neutral safety switch, he cut off the plug and spliced the wires together! It should be a quick and easy fix also, but I was cold and wanted to come inside and sit by the fire.

01-04-2015, 11:49 PM	#321
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 1980 Stepside Build... My first build thread Man I'm jealous. It's a badass truck __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-06-2015, 02:05 PM	#325
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1980 Stepside Build... My first build thread Looks fantastic. Glad you're enjoying it. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

Register or Log In To remove these advertisements.