Project "Just an Old Truck" - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10_ustacould · 12-12-2012, 10:09 AM

Quote:

Originally Posted by jmedero

Shhh... Be quiet.. Do you hear that? What's that sound behind you?

Oh it's the sound of a snow ball effect starting to roll. Lol. Rear disc, new exhaust lay out, just a little bit lower.... Next thing you know

Lol
Posted via Mobile Device

If my kids would stop this whole, "I need to eat 3 times a day and take hot showers at night" stuff I could afford to buy all the cool stuff!

Portmod7 · 12-12-2012, 10:18 AM

Quote:

Originally Posted by lolife99

I wonder if you could run a Porterbuilt tubular trailing arm crossmember,... and position it 1" forward?
How much do you think it is off?
hot trux has a set of 1.5" lowering blocks on his truck,... and that kinda helps kick the rearend forward.

This is kinda what I was thinking too, move the crossmember forward. Now that you post yours, I'm sure mine will have the same issue. What to do.....

jmedero · 12-12-2012, 10:30 AM

I know right... Kids how did they get their priorities all screwed up. Lol
Posted via Mobile Device

C10_ustacould · 12-12-2012, 11:29 AM

Quote:

Originally Posted by lolife99

I wonder if you could run a Porterbuilt tubular trailing arm crossmember,... and position it 1" forward?
How much do you think it is off?
hot trux has a set of 1.5" lowering blocks on his truck,... and that kinda helps kick the rearend forward.

I'd like to have the Porterbuilt piece, and I should probably order one and a notch too. (Damn you Jaun!) I just hate waiting... and they are way backed up. Anyway, I need to handle the rear end first, so I'll flip the trailing arm brackets first and see how it does.

**Hart_Rod** · 12-12-2012, 11:30 AM

Quote:

Originally Posted by BucksSS

I'd like to have the Porterbuilt piece, and I should probably order one and a notch too. (Damn you Jaun!) I just hate waiting... and they a way backed up. Anyway, I need to handle the rear end first, so I'll flip the trailing arm brackets first and see how it does.

I've got one I could loan you.....

**lolife99** · 12-12-2012, 11:33 AM

Hart Rod,... you might want to set the stepside bed on your Porterbuilt chassis.
You will see the wheel base will be off also.
I found this with my PB stepside.

The rear wheel "opening" on a stepside bed is 1" farther foward,... than it is on a fleetside bed.
I found this out the hard way.

C10_ustacould · 12-12-2012, 11:46 AM

Quote:

Originally Posted by Hart_Rod

I've got one I could loan you.....

Always so helpful!

C10_ustacould · 12-12-2012, 11:51 AM

Quote:

Originally Posted by lolife99

Hart Rod,... you might want to set the stepside bed on your Porterbuilt chassis.
You will see the wheel base will be off also.
I found this with my PB stepside.

The rear wheel "opening" on a stepside bed is 1" farther foward,... than it is on a fleetside bed.
I found this out the hard way.

Keith told me last night that Stella's trailing arm heims are bottomed out completely to correct this. He even removed the jam nuts. I don't think Rob is going to use a step bed though...

**Hart_Rod** · 12-12-2012, 11:51 AM

Quote:

Originally Posted by lolife99

Hart Rod,... you might want to set the stepside bed on your Porterbuilt chassis.
You will see the wheel base will be off also.
I found this with my PB stepside.

The rear wheel "opening" on a stepside bed is 1" farther foward,... than it is on a fleetside bed.
I found this out the hard way.

The "extra" crossmember is for my 68. Plus, I'm switching my son's truck to a fleetside....

.

Quote:

Originally Posted by BucksSS

Always so helpful!

I try....

.

C10_ustacould · 12-12-2012, 11:59 AM

Quote:

Originally Posted by Hart_Rod

The "extra" crossmember is for my 68. Plus, I'm switching my son's truck to a fleetside....

.

I try....

.

Always appreciated!

C10_ustacould · 12-12-2012, 06:22 PM

Snapped a couple of pics before pulling the rear wheels back off to do a little trimming...

**67cheby** · 12-12-2012, 06:24 PM

looks great !

HavinSomeFun · 12-12-2012, 06:27 PM

Wow!
Posted via Mobile Device

Portmod7 · 12-12-2012, 06:31 PM

Love it!

BB72CHEVKT · 12-12-2012, 06:31 PM

She is a beauty!

**lolife99** · 12-12-2012, 06:36 PM

Very nice!

RRC · 12-12-2012, 06:49 PM

Looking good!!!
Posted via Mobile Device

Rusbuilt · 12-12-2012, 07:41 PM

Sweet!!

Justin36 · 12-12-2012, 08:06 PM

Looks Awesome Buck! One to be proud of for sure!
Posted via Mobile Device

72BlckButy · 12-12-2012, 08:38 PM

Looks good!

I like the stepside myself.

Just adding fuel to the fire.

**cericd** · 12-12-2012, 08:55 PM

Quote:

Originally Posted by 72BlckButy

Looks good!

I like the stepside myself.

I agree totally!

72BlckButy · 12-12-2012, 08:56 PM

Quote:

Originally Posted by cericd

I agree totally!

You just don't get patina like that every day.

Love to own this truck or another stepside truck.

Street Smart · 12-12-2012, 08:57 PM

Lookin good!

C10_ustacould · 12-12-2012, 09:06 PM

Quote:

Originally Posted by 72BlckButy

Looks good!

I like the stepside myself.

Just adding fuel to the fire.

Thanks, If Rob would have kept his son's step bed it would have been like "twin brothers with different mothers" but with names like Esther Mae...

Quote:

Originally Posted by Justin36

Looks Awesome Buck! One to be proud of for sure!
Posted via Mobile Device

Thanks Justin, I am proud of it. It isn't super detailed or anything, but I am proud of the hard work I have put into it. I am also appreciative of all of the assistance available here on the board!

Quote:

Originally Posted by 67cheby

looks great !

Thanks! Now get to work on that Blazer, no time for loafing!

Quote:

Originally Posted by HavinSomeFun

Wow!
Posted via Mobile Device

It's coming along and you get big credit Kevin! Couldn't and wouldn't have done it with you and Rob. Thank you!

Quote:

Originally Posted by Portmod7

Love it!

Thanks! Keep the good ideas coming on yours, they are helping me too!

Quote:

Originally Posted by BB72CHEVKT

She is a beauty!

Thanks!

Quote:

Originally Posted by lolife99

Very nice!

Thanks Keith, for always taking time to answer questions.

Quote:

Originally Posted by RRC

Looking good!!!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by Rusbuilt

Sweet!!

Thanks, she's coming along isn't she?!

El Campo · 12-12-2012, 09:12 PM

I have always like rallys but these wheels look a thousand times better!!

12-12-2012, 10:30 AM	#303
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Project "Just an Old Truck" I know right... Kids how did they get their priorities all screwed up. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-12-2012, 11:33 AM	#306
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Project "Just an Old Truck" Hart Rod,... you might want to set the stepside bed on your Porterbuilt chassis. You will see the wheel base will be off also. I found this with my PB stepside. The rear wheel "opening" on a stepside bed is 1" farther foward,... than it is on a fleetside bed. I found this out the hard way. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-12-2012, 06:22 PM	#311
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" Snapped a couple of pics before pulling the rear wheels back off to do a little trimming... Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

12-12-2012, 06:24 PM	#312
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Just an Old Truck" looks great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-12-2012, 06:27 PM	#313
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: Project "Just an Old Truck" Wow! Posted via Mobile Device __________________ a green one with some stuff done to it....

12-12-2012, 06:31 PM	#314
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Project "Just an Old Truck" Love it! __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

12-12-2012, 06:31 PM	#315
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: Project "Just an Old Truck" She is a beauty! __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

12-12-2012, 06:36 PM	#316
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Project "Just an Old Truck" Very nice! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-12-2012, 06:49 PM	#317
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Project "Just an Old Truck" Looking good!!! Posted via Mobile Device

12-12-2012, 07:41 PM	#318
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Sweet!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

12-12-2012, 08:06 PM	#319
Justin36 Registered User Join Date: Dec 2009 Location: Selmer, Tennessee Posts: 744	Re: Project "Just an Old Truck" Looks Awesome Buck! One to be proud of for sure! Posted via Mobile Device __________________ Justin

12-12-2012, 08:38 PM	#320
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project "Just an Old Truck" Looks good! I like the stepside myself. Just adding fuel to the fire. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-12-2012, 08:57 PM	#323
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Project "Just an Old Truck" Lookin good! __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

12-12-2012, 09:12 PM	#325
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Project "Just an Old Truck" I have always like rallys but these wheels look a thousand times better!! __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.