MY build thread... - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 02-25-2011, 10:58 PM

Valves are wired and air tanks are ready to paint and install and the drivers side of marks (baggedout81) cutlass is done! I call that PROGRESS.
Posted via Mobile Device

laid_out_70 · 03-06-2011, 02:11 AM

where? lol

baggedout81 · 03-07-2011, 01:11 AM

Couple more fittings an a pressure switch.Then time to mount them tanks.Then on to another thing

shortbed70 · 03-07-2011, 02:24 PM

Yea man! Pressure switch is in the mail, new shifter is in the mail and going to shop for fittings tonight.
Posted via Mobile Device

baggedout81 · 03-17-2011, 08:07 AM

Need some progress pics.

shortbed70 · 03-19-2011, 12:00 PM

Well got the roll pan tacked on so i can see what it will look like when done.

Alan's Classic · 03-22-2011, 11:01 PM

Nice progress!!

shortbed70 · 03-22-2011, 11:45 PM

Quote:

Originally Posted by Alan's Classic

Nice progress!!

Thanks Alan I'm trying to chip away at this thing. I'm having trouble finding seats though! At least for what I want to pay..Getting some brakeline tomarrow so I can get the brakes working.... Can't wait for the smoke show when it's mobile

Posted via Mobile Device

fryco · 03-23-2011, 08:17 PM

Hey man, long time no speak...

That tailgate is gunna be sweet. Whats your goal date to get her finished by?

In hind sight, I'm regretting not bagging mine (mines static). I never paid so much attention to drive ways and pot-holes in my life.

fyi- don't start threads "whats this worth" the thread gets turned off lol! my bad

shortbed70 · 03-23-2011, 09:40 PM

Quote:

Originally Posted by fryco

Hey man, long time no speak...

That tailgate is gunna be sweet. Whats your goal date to get her finished by?

In hind sight, I'm regretting not bagging mine (mines static). I never paid so much attention to drive ways and pot-holes in my life.

fyi- don't start threads "whats this worth" the thread gets turned off lol! my bad

Yea how ya been? I seen you were thinking of selling your truck! Id still like to have the motor out of yours for mine wanna trade? HEHE...This thing HAS to hit the streets by the end of april...I have places I want to take it and the drag strip is one and a few other shows are on my mind...I need some major parts to be mobile like seats,looking for 40/20/40 out of 1500 dodge truck and a windshield are the main things.Started the brake lines today so one less thing.

baggedout81 · 04-01-2011, 09:01 PM

Boy i'ma need to take some pics tomm. bad.

shortbed70 · 04-03-2011, 11:08 PM

Well heres some updates, seats are in out of an olds arora leather all power, center console is kinda in there, shifter set in its location, brake lines are done, compressor is mounted (still need to mount EDC) and scored me some 15x8 rally's from a guy for $25 and my neighbor gave me a 5th one for free got 4 painted today.

daverod · 04-03-2011, 11:17 PM

I like the center thing.

Do you have your power steering pump on yet? I'm pissed I have 2 pumps and I can't get ether to fit?

shortbed70 · 04-03-2011, 11:22 PM

Oh yea didnt get any pics but I did get the pump and lines on. Heres a poser shot in the truck. Two years to get too here. Man I can almost smell the burnt rubber now...Gotta wear the flat spots off the tires. My brake lines look like crap because they are temporary until I get a good tool to bend with. I really suck at bending lines but I can fab just about anything...HUH!

shortbed70 · 04-04-2011, 08:20 PM

Quote:

Originally Posted by daverod

I like the center thing.

Do you have your power steering pump on yet? I'm pissed I have 2 pumps and I can't get ether to fit?

Heres some pics of mine.

shortbed70 · 04-05-2011, 11:00 PM

Well we tried to bleed the brakes and the front bleed great but the back I got NOTHING! I am thinking maybe something is blocking the line but I'm unsure. Any ideas on where to start?Help...
Posted via Mobile Device

daverod · 04-28-2011, 11:54 PM

Cool box. Must be nice to get paid to work on your truck.

How close does your steering column shaft come to hitting your upper arm when its laying low.?

Alan's Classic · 04-12-2011, 11:30 PM

Man your close.

shortbed70 · 04-13-2011, 12:18 AM

I'm leaving out alot like put hood, latch and hardware on, door seals, side windows, sound deadening, and all the other stuff but being able to back out of the shop and drive out of the way sure beats pushing it around or just talking about it... Thanks Alan I was wondering if anybody was still watching this thing...
Posted via Mobile Device

daverod · 04-13-2011, 12:18 AM

You don't really need a windshield.

shortbed70 · 04-13-2011, 12:24 AM

Quote:

Originally Posted by daverod

You don't really need a windshield.

I've thought about some goggles and open faced helmet!!! It will make a trip through town without one with video to come of that as proof!
Posted via Mobile Device

**Captainfab** · 04-13-2011, 01:53 AM

Yeah, windshields are over rated.....just one more thing that needs cleaned

shortbed70 · 04-17-2011, 07:02 PM

Well got some parts primed up today and tailgate/rollpan is fully welded in. Going to try some all metal filler on the gate area and see how I like it. Pics tonight.
Posted via Mobile Device

chad64chevy · 04-19-2011, 06:34 PM

man, i just went through your whole build and you've done really great work with it!! if you ever start fabbing a fuel cell let me know! i think i would like one maybe if i got afford it!

shortbed70 · 04-19-2011, 09:20 PM

Quote:

Originally Posted by chad64chevy

man, i just went through your whole build and you've done really great work with it!! if you ever start fabbing a fuel cell let me know! i think i would like one maybe if i got afford it!

Thanks. I doubt I will start gabbing cells, there's already a few guys that do them on here but they are custom and pretty nice but you have to pay for them. Too much liability for me messing with fuel... If you need anything made look me up.
Posted via Mobile Device

02-25-2011, 10:58 PM	#1
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Valves are wired and air tanks are ready to paint and install and the drivers side of marks (baggedout81) cutlass is done! I call that PROGRESS. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-06-2011, 02:11 AM	#2
laid_out_70 Registered User Join Date: Jul 2010 Location: yv, ca Posts: 280	Re: MY build thread... where? lol __________________ My Build Thread. 70 C-20, SFBD, angled Z, 3 linked. impressive for a noob? http://67-72chevytrucks.com/vboard/s...d.php?t=438132

03-07-2011, 01:11 AM	#3
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... Couple more fittings an a pressure switch.Then time to mount them tanks.Then on to another thing

03-07-2011, 02:24 PM	#4
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Yea man! Pressure switch is in the mail, new shifter is in the mail and going to shop for fittings tonight. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-17-2011, 08:07 AM	#5
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... Need some progress pics.

03-19-2011, 12:00 PM	#6
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well got the roll pan tacked on so i can see what it will look like when done. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-22-2011, 11:01 PM	#7
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Nice progress!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

03-23-2011, 08:17 PM	#9
fryco Registered User Join Date: Jun 2009 Location: somewhere,wi Posts: 170	Re: MY build thread... Hey man, long time no speak... That tailgate is gunna be sweet. Whats your goal date to get her finished by? In hind sight, I'm regretting not bagging mine (mines static). I never paid so much attention to drive ways and pot-holes in my life. fyi- don't start threads "whats this worth" the thread gets turned off lol! my bad

04-01-2011, 09:01 PM	#11
baggedout81 Registered User Join Date: Mar 2010 Location: manhattan KS Posts: 87	Re: MY build thread... Boy i'ma need to take some pics tomm. bad.

04-03-2011, 11:08 PM	#12
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well heres some updates, seats are in out of an olds arora leather all power, center console is kinda in there, shifter set in its location, brake lines are done, compressor is mounted (still need to mount EDC) and scored me some 15x8 rally's from a guy for $25 and my neighbor gave me a 5th one for free got 4 painted today. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-03-2011, 11:17 PM	#13
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... I like the center thing. Do you have your power steering pump on yet? I'm pissed I have 2 pumps and I can't get ether to fit? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-03-2011 at 11:19 PM.

04-03-2011, 11:22 PM	#14
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Oh yea didnt get any pics but I did get the pump and lines on. Heres a poser shot in the truck. Two years to get too here. Man I can almost smell the burnt rubber now...Gotta wear the flat spots off the tires. My brake lines look like crap because they are temporary until I get a good tool to bend with. I really suck at bending lines but I can fab just about anything...HUH! Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 Last edited by shortbed70; 04-03-2011 at 11:39 PM.

04-05-2011, 11:00 PM	#16
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well we tried to bleed the brakes and the front bleed great but the back I got NOTHING! I am thinking maybe something is blocking the line but I'm unsure. Any ideas on where to start?Help... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-28-2011, 11:54 PM	#17
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... Cool box. Must be nice to get paid to work on your truck. How close does your steering column shaft come to hitting your upper arm when its laying low.? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-28-2011 at 11:56 PM.

04-12-2011, 11:30 PM	#18
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: MY build thread... Man your close. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"



Register or Log In To remove these advertisements.

04-13-2011, 12:18 AM	#19
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... I'm leaving out alot like put hood, latch and hardware on, door seals, side windows, sound deadening, and all the other stuff but being able to back out of the shop and drive out of the way sure beats pushing it around or just talking about it... Thanks Alan I was wondering if anybody was still watching this thing... Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-13-2011, 12:18 AM	#20
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: MY build thread... You don't really need a windshield. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-13-2011, 01:53 AM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: MY build thread... Yeah, windshields are over rated.....just one more thing that needs cleaned __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-17-2011, 07:02 PM	#23
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: MY build thread... Well got some parts primed up today and tailgate/rollpan is fully welded in. Going to try some all metal filler on the gate area and see how I like it. Pics tonight. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-19-2011, 06:34 PM	#24
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: MY build thread... man, i just went through your whole build and you've done really great work with it!! if you ever start fabbing a fuel cell let me know! i think i would like one maybe if i got afford it!

Register or Log In To remove these advertisements.