project INCREDIBLE HULK 6.2L with 6L80E - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

edflores · 01-21-2009, 02:37 PM

congrats on the members only sign :}. imma call to see if i get one too.

Blitz · 01-23-2009, 12:39 AM

Any new stuff?

72 SHORTBED 7.0 · 02-01-2009, 02:14 AM

Man you do good work Turbo.trex from ls1tech ran across your thread over here ,reading from the start too now ,and I'm up to speed now..

Keep it coming ...

Now I'm sleepy LOL

72 SHORTBED 7.0 · 02-01-2009, 09:12 AM

I''m Up now,

Hey,D what brand gas tank and pump are you going with on your set up's and the cost you have in it thanks ..

68 short step · 02-01-2009, 10:00 AM

thanks 72, its a fuelcellguy tank (hes a member on here) and he sells the tank with a tank inc. pump, thats in the tank......i think the tank with shipping was around 700-750.....also i think i may of talked with you over the phone awhile ago, is your name trey??

72 SHORTBED 7.0 · 02-01-2009, 02:05 PM

I will pm you .....-0n info

Richard H. · 02-04-2009, 01:48 PM

That is all fantastic work especially the dash

I have read every page twice and you don't mention what or where the evaporator came from. Is it a Gen 4 mag? I called Vintage air and the sales guy would not confirm that a Gen 4 would fit my 71. I am in the mist of shaving my firewall and if I need to fab any brackets and weld , now would be a good time to have it. Your info would save me from buying a mock up unit.
Richard

68 short step · 02-04-2009, 07:09 PM

sorry, yes it is a VA gen 4 magnum.....i use the VA condensor/ dryer that is SPECIFIC to the 67-72 chevy trucks, and then i make my own A/C and heat lines.....
any more ?s just ask, ill be glad to help if i can...
thanks for the complaments
you will need to fab some kinda mounting bracket, and weld it on.....they make it real easy to adapt their mounting bracket to something you can fab up and weld....its not bad at all.

68 short step · 02-08-2009, 09:40 PM

got a few new parts in, so the front suspension got pulled back out.......also im glad the huge ice storm that covered masa, AZ is all melted now, and the back ordered parts are getting shipped out finally...
the intake is now insanely close to the firewall, but we already had this covered, but that'll be a diffrent post with pics.....

nuke1 · 02-09-2009, 01:07 AM

I am speechless, that is insanely awesome, i am so jealous, i want a drop member but......... the other halve says no, you spent enought already, maybe in the future, anyways that lloks great, love the killer 2, nothinf better.

mike nutt · 02-09-2009, 06:33 AM

looks like you have more work to do on the firewall to clear the intake, or you could space the cab up 1/2" to 3/4" . looking great.

tk-mpl · 02-09-2009, 07:14 PM

Does the crossmember raise the engine or is the 6.2 intake that much bigger then a 5.3L..

Looks great...

c10addict · 02-09-2009, 08:50 PM

Killer 2 huh????

68 short step · 02-09-2009, 08:51 PM

Quote:

Originally Posted by mike nutt

looks like you have more work to do on the firewall to clear the intake, or you could space the cab up 1/2" to 3/4" . looking great.

we already desided that diffrent accy, and a better looking intake was gonna be needed awhile ago...

Quote:

Originally Posted by tk-mpl

Does the crossmember raise the engine or is the 6.2 intake that much bigger then a 5.3L..

Looks great...

yes it does raise the engine, the 6.2 intake is a little bigger then the 5.3 tho...

mike nutt · 02-09-2009, 10:10 PM

LS3 intake ?

gringoloco · 02-10-2009, 12:42 AM

Edelbrock has a nice new intake, but I vote sheetmetal

You may want to edit the DM pic- looks like the cat got out...

my67chevytruck · 02-10-2009, 05:35 PM

You may want to edit the DM pic- looks like the cat got out...

[/QUOTE]

RUTROW .....

my67chevytruck · 02-10-2009, 05:35 PM

Quote:

Originally Posted by gringoloco

You may want to edit the DM pic- looks like the cat got out...

RutRow.....

68 short step · 02-10-2009, 07:45 PM

Quote:

Originally Posted by gringoloco

Edelbrock has a nice new intake, but I vote sheetmetal

You may want to edit the DM pic- looks like the cat got out...

yea the edelbrock pro flo is a pimp lookin intake, to bad it wont fit on the l92, the LS3 intake (l76) is an option too.... gringo, you are on the right track tho

68 short step · 02-10-2009, 07:46 PM

Quote:

Originally Posted by my67chevytruck

RutRow.....

i aint skeeeeeeeeeeeeeerd

Sal's '55 Chevy · 02-10-2009, 08:53 PM

How are you running your wires from the fuse block out to the engine? Do you have any pics?

my67chevytruck · 02-10-2009, 11:18 PM

Quote:

Originally Posted by 68 short step

i aint skeeeeeeeeeeeeeerd

68 short step · 02-10-2009, 11:37 PM

Quote:

Originally Posted by Sal's '55 Chevy

How are you running your wires from the fuse block out to the engine? Do you have any pics?

im not sure what you're asking....im gonna have a fuse panel under the hood that'll just be used for the engine/trans.....the other fuses will be on the inside of the cab

PBFAB.COM · 02-11-2009, 10:42 AM

[QUOTE=68 short step;3132672]got a few new parts in, so the front suspension got pulled back out.......also im glad the huge ice storm that covered masa, AZ is all melted now, and the back ordered parts are getting shipped out finally...QUOTE]

I never used the "ice storm" excuse.... maybe next time!?

Again, thanks for the patience on the parts, it's nice to see them all fit up! Everything looks great!

my67chevytruck · 02-11-2009, 10:59 AM

Nate,

Your parts make it look "That Much" better. Good Job Guys!

01-21-2009, 02:37 PM	#301
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: project INCREDIBLE HULK 6.2L with 6L80E congrats on the members only sign :}. imma call to see if i get one too.

01-23-2009, 12:39 AM	#302
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: project INCREDIBLE HULK 6.2L with 6L80E Any new stuff?

02-01-2009, 02:14 AM	#303
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: project INCREDIBLE HULK 6.2L with 6L80E Man you do good work Turbo.trex from ls1tech ran across your thread over here ,reading from the start too now ,and I'm up to speed now.. Keep it coming ... Now I'm sleepy LOL Last edited by 72 SHORTBED 7.0; 02-01-2009 at 02:16 AM.

02-01-2009, 09:12 AM	#304
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: project INCREDIBLE HULK 6.2L with 6L80E I''m Up now, Hey,D what brand gas tank and pump are you going with on your set up's and the cost you have in it thanks .. Last edited by 72 SHORTBED 7.0; 02-01-2009 at 09:13 AM.

02-01-2009, 10:00 AM	#305
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E thanks 72, its a fuelcellguy tank (hes a member on here) and he sells the tank with a tank inc. pump, thats in the tank......i think the tank with shipping was around 700-750.....also i think i may of talked with you over the phone awhile ago, is your name trey??

02-01-2009, 02:05 PM	#306
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: project INCREDIBLE HULK 6.2L with 6L80E I will pm you .....-0n info

02-04-2009, 01:48 PM	#307
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: project INCREDIBLE HULK 6.2L with 6L80E That is all fantastic work especially the dash I have read every page twice and you don't mention what or where the evaporator came from. Is it a Gen 4 mag? I called Vintage air and the sales guy would not confirm that a Gen 4 would fit my 71. I am in the mist of shaving my firewall and if I need to fab any brackets and weld , now would be a good time to have it. Your info would save me from buying a mock up unit. Richard __________________ The ole 350 budget build.

02-04-2009, 07:09 PM	#308
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E sorry, yes it is a VA gen 4 magnum.....i use the VA condensor/ dryer that is SPECIFIC to the 67-72 chevy trucks, and then i make my own A/C and heat lines..... any more ?s just ask, ill be glad to help if i can... thanks for the complaments you will need to fab some kinda mounting bracket, and weld it on.....they make it real easy to adapt their mounting bracket to something you can fab up and weld....its not bad at all. Last edited by 68 short step; 02-04-2009 at 07:12 PM.

02-08-2009, 09:40 PM	#309
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E got a few new parts in, so the front suspension got pulled back out.......also im glad the huge ice storm that covered masa, AZ is all melted now, and the back ordered parts are getting shipped out finally... the intake is now insanely close to the firewall, but we already had this covered, but that'll be a diffrent post with pics..... Last edited by 68 short step; 02-08-2009 at 11:46 PM.

02-09-2009, 01:07 AM	#310
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: project INCREDIBLE HULK 6.2L with 6L80E I am speechless, that is insanely awesome, i am so jealous, i want a drop member but......... the other halve says no, you spent enought already, maybe in the future, anyways that lloks great, love the killer 2, nothinf better. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-09-2009, 06:33 AM	#311
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: project INCREDIBLE HULK 6.2L with 6L80E looks like you have more work to do on the firewall to clear the intake, or you could space the cab up 1/2" to 3/4" . looking great.

02-09-2009, 07:14 PM	#312
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: project INCREDIBLE HULK 6.2L with 6L80E Does the crossmember raise the engine or is the 6.2 intake that much bigger then a 5.3L.. Looks great...

02-09-2009, 08:50 PM	#313
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: project INCREDIBLE HULK 6.2L with 6L80E Killer 2 huh???? __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-09-2009, 10:10 PM	#315
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: project INCREDIBLE HULK 6.2L with 6L80E LS3 intake ?

02-10-2009, 12:42 AM	#316
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: project INCREDIBLE HULK 6.2L with 6L80E Edelbrock has a nice new intake, but I vote sheetmetal You may want to edit the DM pic- looks like the cat got out... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

02-10-2009, 05:35 PM	#317
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: project INCREDIBLE HULK 6.2L with 6L80E You may want to edit the DM pic- looks like the cat got out...[/QUOTE] RUTROW ..... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

02-10-2009, 08:53 PM	#321
Sal's '55 Chevy Registered User Join Date: Feb 2009 Location: Garland, Texas Posts: 158	Re: project INCREDIBLE HULK 6.2L with 6L80E How are you running your wires from the fuse block out to the engine? Do you have any pics? __________________ '55 Chevy PU 2nd Series '97 Chevy Silverado XCab '13 GMC Sierra

02-11-2009, 10:42 AM	#324
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: project INCREDIBLE HULK 6.2L with 6L80E [QUOTE=68 short step;3132672]got a few new parts in, so the front suspension got pulled back out.......also im glad the huge ice storm that covered masa, AZ is all melted now, and the back ordered parts are getting shipped out finally...QUOTE] I never used the "ice storm" excuse.... maybe next time!? Again, thanks for the patience on the parts, it's nice to see them all fit up! Everything looks great! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-11-2009, 10:59 AM	#325
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: project INCREDIBLE HULK 6.2L with 6L80E Nate, Your parts make it look "That Much" better. Good Job Guys! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470 Last edited by my67chevytruck; 02-11-2009 at 10:59 AM.

Register or Log In To remove these advertisements.