OR Parting out 72 Suburban C10 402 TH400 - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 09-07-2014, 11:02 AM

Quote:

Originally Posted by pimpston65

any chance you have the upper sliding support brackets for the clamshell liftgate?

Yes, 30.00 plus shipping

Quote:

Originally Posted by MikeCar

I'm looking for the bezel and a good used gasket that goes around the rear lower tailgate button. I saw the pair in your first photos and looked through the multiple pages of posts and didn't see that they were gone. Are they still available and price?

Probably do but finding it would be the challenge. I have 3 more Sub's that have it. 22.50 shipped

Quote:

Originally Posted by truckdude239

Go5 the wiper motor works perfect!

Sweet!

Quote:

Originally Posted by BIG ORANGE

Got some good pic's of yr BEST gas tank straps, looking at some other on here but wanting to buy the best ones, shipping to 29720 S.C.
thanks Donnie

I have a pair or two off I'll look for them.

Thanks, Tom

MikeCar · 09-07-2014, 11:46 AM

Great. I will take the bezel and gasket. Please PM me with payment details.

Jake1971 · 09-07-2014, 11:58 AM

Quote:

Originally Posted by BIG ORANGE

Got some good pic's of your BEST gas tank straps, looking at some other on here but wanting to buy the best ones, shipping to 29720 S.C.
thanks Donnie

Quote:

Originally Posted by tll74

I have a pair or two off I'll look for them.

Thanks, Tom

Hey Tom, I need a pair of OEM fuel tank straps for a burb or blazer as well, shipped to 78602. LMK total. Thanks again!

GuyO · 09-08-2014, 10:06 AM

I would like the spare tire cover if still available. I can have UPS come by and pick it up!

evil1 · 09-10-2014, 05:30 PM

do you still have this trim? if so how much with shipping to 95301?
thanks

**tll74** · 09-27-2014, 02:05 AM

Quote:

Originally Posted by Jake1971

Hey Tom, I need a pair of OEM fuel tank straps for a burb or blazer as well, shipped to 78602. LMK total. Thanks again!

I should have 40.00 shipped

Quote:

Originally Posted by GuyO

I would like the spare tire cover if still available. I can have UPS come by and pick it up!

Sorry it was sold.

Quote:

Originally Posted by evil1

do you still have this trim? if so how much with shipping to 95301?
thanks

No but I do have it on a sub I will be parting out in the months to come.

Thanks, Tom

Jake1971 · 09-27-2014, 09:31 AM

Quote:

Originally Posted by Jake1971

Hey Tom, I need a pair of OEM fuel tank straps for a burb or blazer as well, shipped to 78602. LMK total. Thanks again!

Quote:

Originally Posted by tll74

I should have 40.00 shipped

No but I do have it on a sub I will be parting out in the months to come.

Thanks, Tom

Fuel tank straps. 25.00
Sounds good. Pics? I will need all the associated hardware as well (u-bolts etc). Let me know how to pay you.

MikeCar · 10-07-2014, 11:39 PM

Tom,
I received my tailgate bezel and gasket today. They are exactly what I needed!!! Very well packaged and quick delivery. Thank you again!!

MikeCar

bmcvicker92 · 10-15-2014, 09:42 PM

i weeded through this and didnt really catch any brake conversations, by chance do you still have anything for the five lugs? id rather use orig anything than Chinese. im lokking for everything but calipers and rotors, but will buy themm too if they are a to be sold as a whole. thank you, foorgive me if i missed a "sold post"

Chuck K · 10-18-2014, 09:48 PM

Tom, I'm in need of a headliner with rear a/c really need the 2nd pc from the front. Also the belt line trim for the rear barn doors. Thanks for any help if possible.

**tll74** · 10-21-2014, 01:09 AM

Quote:

Originally Posted by Jake1971

Fuel tank straps. 25.00
Sounds good. Pics? I will need all the associated hardware as well (u-bolts etc). Let me know how to pay you.

Somehow I missed this one. Still looking?

Quote:

Originally Posted by MikeCar

Tom,
I received my tailgate bezel and gasket today. They are exactly what I needed!!! Very well packaged and quick delivery. Thank you again!!

MikeCar

Glad you like it.

Quote:

Originally Posted by bmcvicker92

i weeded through this and didnt really catch any brake conversations, by chance do you still have anything for the five lugs? id rather use orig anything than Chinese. im lokking for everything but calipers and rotors, but will buy themm too if they are a to be sold as a whole. thank you, foorgive me if i missed a "sold post"

I have everyting you need. Shoot me a PM and we'll figure it out.

Quote:

Originally Posted by Chuck K

Tom, I'm in need of a headliner with rear a/c really need the 2nd pc from the front. Also the belt line trim for the rear barn doors. Thanks for any help if possible.

I don't ship headliners. They are exspensive to ship and to fragle. Nothing on the trim.

Thanks, Tom

bonnieclyde100 · 10-27-2014, 10:46 AM

do you still have the intermediate shaft and if so is it the one with the 3 1/4 rag joint that fits the powersteering gear box with the 13/16 shaft

**tll74** · 10-28-2014, 09:47 PM

Quote:

Originally Posted by bonnieclyde100

do you still have the intermediate shaft and if so is it the one with the 3 1/4 rag joint that fits the powersteering gear box with the 13/16 shaft

Yes I do. Not sure of the spline count though.

bonnieclyde100 · 10-28-2014, 10:58 PM

Quote:

Originally Posted by tll74

Yes I do. Not sure of the spline count though.

im sorry but i have already purchased one from another member sorry for any inconveniance.

**restart42** · 10-31-2014, 08:13 PM

Do you have the bracket for the dome light that is attached to the roof bow truss,
need for my 72 Burb,,
Thanks ,,Pat

**tll74** · 11-02-2014, 12:41 AM

Quote:

Originally Posted by Steve Cole

Tom, do you have a good set of hood hinges? Need a pair for my '68. Would be going to 28027 (business). Thanks, Steve.

Sure, 45.00 as a take off pair or 75.00 a pair acid dipped and media blasted. Both nice tight hinges. 22.00 shipping.

Quote:

Originally Posted by restart42

Do you have the bracket for the dome light that is attached to the roof bow truss,
need for my 72 Burb,,
Thanks ,,Pat

Yes, 10.00 shipped

Thanks, Tom

**restart42** · 11-02-2014, 12:03 PM

Quote:

Originally Posted by tll74

Sure, 45.00 as a take off pair or 75.00 a pair acid dipped and media blasted. Both nice tight hinges. 22.00 shipping.

[Originally Posted by restart42
Do you have the bracket for the dome light that is attached to the roof bow truss,
need for my 72 Burb,,
Thanks ,,Pat]

Yes, 10.00 shipped

Thanks, Tom

Tom,, PM your paypal addy,,will pm back home addy,,,
Thanks,,,Pat

Steve Cole · 11-03-2014, 11:01 AM

Tom, I'm waiting to hear about some powder coated hood hinges I spoke for. If it doesn't work out, I will buy your blasted set if you still have them. Thanks

**TBONE1964** · 11-10-2014, 02:15 AM

Hello all,

I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently.

Thank you,
Tom

**gmc 2500 4x4** · 11-02-2014, 05:28 AM

do you have the carb still? looking for one

mdw · 11-19-2014, 09:45 PM

Hey There,
I am looking for some small really dumb parts, I need the 4 catches for the barn doors on a 71 burb. I am changing from a clam shell set up to the barn doors, I have the doors and hinges, just need the catches and screws for them to attach to the body. I am in Molalla or zip is 97038 can you help??? Thanks

**tll74** · 11-20-2014, 02:01 AM

Back from hunting and getting caught up.

Quote:

Originally Posted by gmc 2500 4x4

do you have the carb still? looking for one

I do but it was a later model carb.

Quote:

Originally Posted by Steve Cole

Tom, I'm waiting to hear about some powder coated hood hinges I spoke for. If it doesn't work out, I will buy your blasted set if you still have them. Thanks

Umm kinda confused. I don't offer any that are powder coated. I do have some that are acid dipped and blasted though.

Quote:

Originally Posted by adam9496

Do you have any good upper suburban hatches? Thanks

Non that are rust free.

Quote:

Originally Posted by Chuck K

Tom, Would you happen to have a cheyenne super glove box door.

Not any nice ones.

Quote:

Originally Posted by Boe3

I know I'm late to the party but I'm looking for parts to install a lower end gate on my burb. I have the lift gate with all parts to mount already and a lower gate alone. I'm looking for the lower end gate hinges with bolts, stops with bolts, latches with hardware, support straps with hardware, access covers, bolt hole plugs, and anything else you think I may be missing. Please let me know. Thanks,Rich.

I should have it all. PM me with a detailed list.

Quote:

Originally Posted by mdw

Hey There,
I am looking for some small really dumb parts, I need the 4 catches for the barn doors on a 71 burb. I am changing from a clam shell set up to the barn doors, I have the doors and hinges, just need the catches and screws for them to attach to the body. I am in Molalla or zip is 97038 can you help??? Thanks

I would have to double check but I should have them. 30.00 shipped.

Thanks, Tom

mdw · 11-20-2014, 12:08 PM

GREAT if you could pm me the payment directions it would be great, Thanks, Mike

Chuck K · 11-19-2014, 06:57 AM

Tom, Would you happen to have a cheyenne super glove box door.

Boe3 · 11-19-2014, 09:33 PM

I know I'm late to the party but I'm looking for parts to install a lower end gate on my burb. I have the lift gate with all parts to mount already and a lower gate alone. I'm looking for the lower end gate hinges with bolts, stops with bolts, latches with hardware, support straps with hardware, access covers, bolt hole plugs, and anything else you think I may be missing. Please let me know. Thanks,Rich.

09-07-2014, 11:46 AM	#2
MikeCar Registered User Join Date: Aug 2014 Location: Sacramento, CA Posts: 11	Re: Parting out 72 Suburban C10 402 TH400 Great. I will take the bezel and gasket. Please PM me with payment details. __________________ MikeCar 1972 K20 Suburban Sacramento, CA

09-08-2014, 10:06 AM	#4
GuyO Registered User Join Date: Nov 2011 Location: Kirkland, WA Posts: 343	Re: Parting out 72 Suburban C10 402 TH400 I would like the spare tire cover if still available. I can have UPS come by and pick it up!

09-10-2014, 05:30 PM	#5
evil1 Registered User Join Date: Mar 2009 Location: Atwater Ca. Posts: 15	Re: Parting out 72 Suburban C10 402 TH400 do you still have this trim? if so how much with shipping to 95301? thanks

10-07-2014, 11:39 PM	#8
MikeCar Registered User Join Date: Aug 2014 Location: Sacramento, CA Posts: 11	Re: Parting out 72 Suburban C10 402 TH400 Tom, I received my tailgate bezel and gasket today. They are exactly what I needed!!! Very well packaged and quick delivery. Thank you again!! MikeCar __________________ MikeCar 1972 K20 Suburban Sacramento, CA

10-15-2014, 09:42 PM	#9
bmcvicker92 Registered User Join Date: Jun 2011 Location: ventura, california Posts: 24	Re: Parting out 72 Suburban C10 402 TH400 i weeded through this and didnt really catch any brake conversations, by chance do you still have anything for the five lugs? id rather use orig anything than Chinese. im lokking for everything but calipers and rotors, but will buy themm too if they are a to be sold as a whole. thank you, foorgive me if i missed a "sold post"

10-18-2014, 09:48 PM	#10
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban C10 402 TH400 Tom, I'm in need of a headliner with rear a/c really need the 2nd pc from the front. Also the belt line trim for the rear barn doors. Thanks for any help if possible.

10-27-2014, 10:46 AM	#12
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Parting out 72 Suburban C10 402 TH400 do you still have the intermediate shaft and if so is it the one with the 3 1/4 rag joint that fits the powersteering gear box with the 13/16 shaft

10-31-2014, 08:13 PM	#15
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban C10 402 TH400 Do you have the bracket for the dome light that is attached to the roof bow truss, need for my 72 Burb,, Thanks ,,Pat __________________ Pat 72 GMC Suburban,4X4,402BB

11-03-2014, 11:01 AM	#18
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,623	Re: Parting out 72 Suburban C10 402 TH400 Tom, I'm waiting to hear about some powder coated hood hinges I spoke for. If it doesn't work out, I will buy your blasted set if you still have them. Thanks

11-10-2014, 02:15 AM	#19
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting out 72 Suburban C10 402 TH400 Hello all, I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-02-2014, 05:28 AM	#20
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Parting out 72 Suburban C10 402 TH400 do you have the carb still? looking for one

11-19-2014, 09:45 PM	#21
mdw Registered User Join Date: Apr 2012 Location: molalla or Posts: 90	Re: Parting out 72 Suburban C10 402 TH400 Hey There, I am looking for some small really dumb parts, I need the 4 catches for the barn doors on a 71 burb. I am changing from a clam shell set up to the barn doors, I have the doors and hinges, just need the catches and screws for them to attach to the body. I am in Molalla or zip is 97038 can you help??? Thanks

11-20-2014, 12:08 PM	#23
mdw Registered User Join Date: Apr 2012 Location: molalla or Posts: 90	Re: Parting out 72 Suburban C10 402 TH400 GREAT if you could pm me the payment directions it would be great, Thanks, Mike

11-19-2014, 06:57 AM	#24
Chuck K Registered User Join Date: Aug 2013 Location: Nles, Ohio Posts: 159	Re: Parting out 72 Suburban C10 402 TH400 Tom, Would you happen to have a cheyenne super glove box door.

11-19-2014, 09:33 PM	#25
Boe3 Registered User Join Date: Nov 2014 Location: Chicago,Illinois Posts: 31	Re: Parting out 72 Suburban C10 402 TH400 I know I'm late to the party but I'm looking for parts to install a lower end gate on my burb. I have the lift gate with all parts to mount already and a lower gate alone. I'm looking for the lower end gate hinges with bolts, stops with bolts, latches with hardware, support straps with hardware, access covers, bolt hole plugs, and anything else you think I may be missing. Please let me know. Thanks,Rich.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.