KS Fall Clearance sale! ALOT of parts cheap!!! - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

damholl · 11-22-2010, 11:37 AM

do you have a dana 20 coupler to the sm465 tranny

decodan · 11-22-2010, 01:09 PM

Hey Randy,

I have a friend looking for an oil pan for a 6 cylinder. I think any 194, 230, 250 or maybe 292 will work. He has a 1965 C-10 with a 230. Do you have anything or know where one might be.

Thanks, Dan

teeitup · 11-22-2010, 02:05 PM

damholl, sorry none of those
decodan, Dan, sorry all I have right now is BB stuff
Thanks Randy

Isanti Lawn Man · 11-22-2010, 08:53 PM

Randy,

Im looking for the following if available:

1). Nice hood for a 72 Chevy C10
2). Good used condition upper and lower moldings for a 72 Chevy C10. Black lowers and chrome uppers.
3). Nice grill for a 72 Chevy C10

I would most likely drive down and get this in 2-3 weeks.

Let me know your thoughts.

-Mike

superchevy · 11-22-2010, 11:08 PM

Hi Randy,
Do you have any GMC fender eyebrows?
I just need the driver's side eyebrow mounting clips...misplaced mine...don't know if they are the same as pass side.
Thanks,
Casey

Tynee · 11-23-2010, 03:32 PM

Randy,
What would you take for a passenger side headlight assembly (need everything from the mount to the bezel, no bulb), and a 69/70 grille center support? Shipped to 40383 commercial address?

teeitup · 11-23-2010, 04:56 PM

Mike, I have a good hood. Driver quality outer grill. Sold all my trim I had
Casey, I'll look tonight
Tynee, I'll look I should have all that
Thanks Randy

teeitup · 11-23-2010, 06:02 PM

Casey, here is what I have
Tynee, I have all but the spring on headlight bucket $15 plus shipping for pair
Thanks Randy

superchevy · 11-23-2010, 08:51 PM

Hi Randy,
Those are the clips I need. I need the large clip in upper right of pic, and one of the four small clips along with one of the small squares...3 pieces total.
If you could please Pm me price with shipping to Austin, TX 78744 and your PayPal info.
Thanks,
Casey

Tynee · 11-24-2010, 11:34 PM

Couple other places to check, I'm going to pass for now. I may be back.

Thanks.

teeitup · 11-25-2010, 01:29 PM

Casey, I'll get them out to you Fri
Tynee, no problem

teeitup · 11-25-2010, 01:30 PM

pic for RLTW375

teeitup · 11-25-2010, 01:31 PM

pics for Alan, here is the one small separation, these are pics of the same spot

teeitup · 11-25-2010, 01:32 PM

here is the one that one the bottom

teeitup · 11-25-2010, 01:33 PM

one dent in corner

step350 · 11-25-2010, 01:45 PM

how much for the inner a/c vents and a/c control box. shipped to 08053

SRVBLUES64 · 11-25-2010, 03:30 PM

I hope Im not to late Im looking for both inner fenders for a 66 chevy longbed and both front and rear bumpers Im in indiana 46062 Thanks Jeff

teeitup · 11-25-2010, 05:15 PM

step350, I'll get pics of what I have
SRVBLUE, Jeff, sorry no 66 stuff right now
Thanks Randy

step350 · 11-25-2010, 07:15 PM

thanks what would your price be?

teeitup · 11-26-2010, 06:31 PM

pics

muscletrucks · 11-28-2010, 08:20 PM

Randy, I have a 72 gmc 3/4 ton 4x4 with a bent tie rod. Do you have a straight one in ok shape? I attached a picture.

Thanks, Rodney

teeitup · 11-28-2010, 08:56 PM

Rodney, all I have right now are 1/2 dana 4x4's and the ones I have are bent too, sorry. Thanks Randy

mcbassin · 11-29-2010, 12:18 AM

Hi Randy,
Sorry to interupt this thread, just curious if you would have any of these parts: Here
pass side lower control arm 72 half ton
rear spring upper mount cross member half ton.
thanks,

teeitup · 11-29-2010, 12:30 AM

Hey Mike, I have complete 5 lug front ends, I don't separate. No rear crossmembers. Thanks Randy

dave666693 · 11-29-2010, 12:12 PM

I am looking for 4 good useable windshield washer nozzles. Thanks

11-22-2010, 11:37 AM	#351
damholl Registered User Join Date: Jan 2010 Location: Langley b.c. Posts: 20	Re: Fall Clearance sale! ALOT of parts cheap!!! do you have a dana 20 coupler to the sm465 tranny

11-22-2010, 01:09 PM	#352
decodan C-20 Long Stroker Join Date: Oct 2005 Location: Frohna, MO Posts: 137	Re: Fall Clearance sale! ALOT of parts cheap!!! Hey Randy, I have a friend looking for an oil pan for a 6 cylinder. I think any 194, 230, 250 or maybe 292 will work. He has a 1965 C-10 with a 230. Do you have anything or know where one might be. Thanks, Dan __________________ "A Hand Shake Is Your Word." Decodan ************************ 1951 Chevrolet Suburban 1952 GMC Suburban 1963 Mercury Comet 2-dr (Sorry, I know) 1963 Mercury Comet 2-dr Parts Car, (better than what I originally started with) 2010 F-150 4WD 2015 Subaru Outback (what the hey, got to have one that is not a gas hog)

11-22-2010, 02:05 PM	#353
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! damholl, sorry none of those decodan, Dan, sorry all I have right now is BB stuff Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-22-2010, 08:53 PM	#354
Isanti Lawn Man Registered User Join Date: Oct 2010 Location: Isanti, MN Posts: 75	Re: Fall Clearance sale! ALOT of parts cheap!!! Randy, Im looking for the following if available: 1). Nice hood for a 72 Chevy C10 2). Good used condition upper and lower moldings for a 72 Chevy C10. Black lowers and chrome uppers. 3). Nice grill for a 72 Chevy C10 I would most likely drive down and get this in 2-3 weeks. Let me know your thoughts. -Mike

11-22-2010, 11:08 PM	#355
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Fall Clearance sale! ALOT of parts cheap!!! Hi Randy, Do you have any GMC fender eyebrows? I just need the driver's side eyebrow mounting clips...misplaced mine...don't know if they are the same as pass side. Thanks, Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

11-23-2010, 03:32 PM	#356
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Fall Clearance sale! ALOT of parts cheap!!! Randy, What would you take for a passenger side headlight assembly (need everything from the mount to the bezel, no bulb), and a 69/70 grille center support? Shipped to 40383 commercial address? __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

11-23-2010, 04:56 PM	#357
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! Mike, I have a good hood. Driver quality outer grill. Sold all my trim I had Casey, I'll look tonight Tynee, I'll look I should have all that Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2010, 06:02 PM	#358
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! Casey, here is what I have Tynee, I have all but the spring on headlight bucket $15 plus shipping for pair Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2010, 08:51 PM	#359
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Re: Fall Clearance sale! ALOT of parts cheap!!! Hi Randy, Those are the clips I need. I need the large clip in upper right of pic, and one of the four small clips along with one of the small squares...3 pieces total. If you could please Pm me price with shipping to Austin, TX 78744 and your PayPal info. Thanks, Casey __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

11-24-2010, 11:34 PM	#360
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Fall Clearance sale! ALOT of parts cheap!!! Couple other places to check, I'm going to pass for now. I may be back. Thanks. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

11-25-2010, 01:29 PM	#361
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! Casey, I'll get them out to you Fri Tynee, no problem __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2010, 01:30 PM	#362
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! pic for RLTW375 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2010, 01:31 PM	#363
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! pics for Alan, here is the one small separation, these are pics of the same spot Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 11-25-2010 at 05:16 PM.

11-25-2010, 01:32 PM	#364
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! here is the one that one the bottom Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2010, 01:33 PM	#365
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! one dent in corner Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

11-25-2010, 01:45 PM	#366
step350 Registered User Join Date: Nov 2010 Location: Longmont Colorado Posts: 20	Re: Fall Clearance sale! ALOT of parts cheap!!! how much for the inner a/c vents and a/c control box. shipped to 08053

11-25-2010, 03:30 PM	#367
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	Re: Fall Clearance sale! ALOT of parts cheap!!! I hope Im not to late Im looking for both inner fenders for a 66 chevy longbed and both front and rear bumpers Im in indiana 46062 Thanks Jeff

11-25-2010, 05:15 PM	#368
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! step350, I'll get pics of what I have SRVBLUE, Jeff, sorry no 66 stuff right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2010, 07:15 PM	#369
step350 Registered User Join Date: Nov 2010 Location: Longmont Colorado Posts: 20	Re: Fall Clearance sale! ALOT of parts cheap!!! thanks what would your price be?

11-26-2010, 06:31 PM	#370
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-28-2010, 08:20 PM	#371
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: Fall Clearance sale! ALOT of parts cheap!!! Randy, I have a 72 gmc 3/4 ton 4x4 with a bent tie rod. Do you have a straight one in ok shape? I attached a picture. Thanks, Rodney Attached Images __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

11-28-2010, 08:56 PM	#372
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! Rodney, all I have right now are 1/2 dana 4x4's and the ones I have are bent too, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2010, 12:18 AM	#373
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Fall Clearance sale! ALOT of parts cheap!!! Hi Randy, Sorry to interupt this thread, just curious if you would have any of these parts: Here pass side lower control arm 72 half ton rear spring upper mount cross member half ton. thanks, __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-29-2010, 12:30 AM	#374
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Fall Clearance sale! ALOT of parts cheap!!! Hey Mike, I have complete 5 lug front ends, I don't separate. No rear crossmembers. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2010, 12:12 PM	#375
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Fall Clearance sale! ALOT of parts cheap!!! I am looking for 4 good useable windshield washer nozzles. Thanks __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

Register or Log In To remove these advertisements.