How To: Ruin a Perfectly Good K/5 - Page 15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jonesky2 · 12-24-2013, 05:12 AM

how about i buy this truck from you (save this truck from you) for what you think is reasonable price, so you can get a nice 2wd.

smbrouss70 · 12-24-2013, 11:02 AM

Quote:

Originally Posted by gringoloco

CST, Highlander, 2wd? <-- I like this idea! Hm, what kind of stuff do you need?

If you do the body swap, I could really use the front seats out of the donor. Maybe the top and hatch if they are good. Maybe a few other pieces... Hell, it sounds like I should get everything you take off of the donor.

mcbassin · 12-24-2013, 12:12 PM

Quote:

It probably wouldn't be a 'chop', per se, though I have been known to break out the sawzall Still not sure I want to frame swap this one, as it's just so clean. Most people I talk to think it's restored and are shocked when I tell them it's mostly original. You just can't duplicate that; part of the fun is preserving the history. On the other hand, it would also be a really clean 2wd and make people shake their heads. I used to enjoy sitting back and listening to people try to figure out what the deal was with my old yellow blazer--especially with the top off--hacked pickup? converted 4wd? monstrosity? I keep seeing this one in my mind aired-out, tucking 20" TT2s, topless, with the plaid seats catching some rays

Just think, if you had picked up that 2wd in the eighties, it would have probably ended up pro-street, tubbed, monochrome teal, with a pink heartbeat stripe and grey tweed interior!

Oh, I know you wouldn't need to chop anything. Your builds are always done right.
I have no doubt if you do put the body on the 2wd frame it will be super cool.
Looking forward to the build.

Yeah, I lived through the pro street days, tweed, and candy colors. I regret that I never had the foresight to buy that thing from him. At the time, if wasn't a big block, I didn't have any interest. Go figure. THIS is a spitting image, except stock height and more rust.

C10_ustacould · 12-24-2013, 12:22 PM

Quote:

Originally Posted by mcbassin

Oh, I know you wouldn't need to chop anything. Your builds are always done right.
I have no doubt if you do put the body on the 2wd frame it will be super cool.
Looking forward to the build.

Yeah, I lived through the pro street days, tweed, and candy colors. I regret that I never had the foresight to buy that thing from him. At the time, if wasn't a big block, I didn't have any interest. Go figure. THIS is a spitting image, except stock height and more rust.

That Blazer can be bought today... board member mrweld owns it and is open to selling it. (sorry for the highjack)

gringoloco · 12-29-2013, 01:10 PM

Quote:

Originally Posted by jonesky2

how about i buy this truck from you (save this truck from you) for what you think is reasonable price, so you can get a nice 2wd.

Make an offer- everything is for sale

That goes for anyone... I wouldn't be asking crazy money for it. I really would just rather have a 2-wheeler...

Quote:

Originally Posted by smbrouss70

If you do the body swap, I could really use the front seats out of the donor. Maybe the top and hatch if they are good. Maybe a few other pieces... Hell, it sounds like I should get everything you take off of the donor.

Thinking of using the seats in my truck, but undecided. Everything else would likely be for sale if I end up using the frame. The top is good, the hatch has one major crack.

Quote:

Originally Posted by mcbassin

Oh, I know you wouldn't need to chop anything. Your builds are always done right.
I have no doubt if you do put the body on the 2wd frame it will be super cool.
Looking forward to the build.

Yeah, I lived through the pro street days, tweed, and candy colors. I regret that I never had the foresight to buy that thing from him. At the time, if wasn't a big block, I didn't have any interest. Go figure. THIS is a spitting image, except stock height and more rust.

Thanks, man. I'm slightly averse to hacking this one up, too. I really like that ochre!

Quote:

Originally Posted by Bucks68

That Blazer can be bought today... board member mrweld owns it and is open to selling it. (sorry for the highjack)

I'd be interested today, if someone wants to save this one

jonesky2 · 12-31-2013, 09:42 AM

i would buy it. I dont know what a good starting price to offer. So whats your ballpark?

C10_ustacould · 12-31-2013, 09:57 AM

Quote:

Originally Posted by gringoloco

Make an offer- everything is for sale

That goes for anyone... I wouldn't be asking crazy money for it. I really would just rather have a 2-wheeler...

I'd be interested today, if someone wants to save this one

If you put a price on it, be careful, someone will pay it. Happened to me recently!

gringoloco · 12-31-2013, 04:04 PM

Quote:

Originally Posted by jonesky2

i would buy it. I dont know what a good starting price to offer. So whats your ballpark?

Sending PM

Quote:

Originally Posted by Bucks68

If you put a price on it, be careful, someone will pay it. Happened to me recently!

Haha! I know, right?! Talked with my wife today about what we think it will take to let go of it. I have some PMs to reply to

**Tom Vogel** · 01-01-2014, 11:11 AM

Man O Man... I think I would regret selling if it were mine. BUT... selling to a member is good... I guess ... lol

mcbassin · 01-17-2014, 06:32 PM

Saw this on Instagram

TheBlueBomber · 01-17-2014, 08:43 PM

You know... I thought I recognized this earlier!!

gringoloco · 03-01-2014, 04:49 PM

Quote:

Originally Posted by mcbassin

Saw this on Instagram

Hey, that's pretty cool!

gringoloco · 12-27-2014, 09:03 PM

Got to see the old girls for a bit. Sure do miss 'em...

C10_ustacould · 12-27-2014, 09:27 PM

You back in the world?? Hope all is going well in your new path. Best wishes in the coming year!

gringoloco · 12-28-2014, 08:26 PM

Thanks! Just for a month for some training--headed back in a few days...

mcbassin · 12-29-2014, 08:58 AM

Quote:

Originally Posted by gringoloco

Got to see the old girls for a bit. Sure do miss 'em...

Glad to see you got to visit with your trucks

darkhorse970 · 12-29-2014, 10:08 AM

Quote:

Originally Posted by gringoloco

Got to see the old girls for a bit. Sure do miss 'em...

It's good to see you back on here Chris! That's certainly a good looking pair of rides.

69gmcc10 · 12-29-2014, 12:30 PM

Good to hear from you! Welcome back, even if it is only for a month!

gringoloco · 12-30-2014, 05:48 PM

Thanks guys, for making me feel welcome. Had to stop by and see the trucks (and family). Been surfing the site and have a few ideas for the trucks when I get back...

68Timber · 12-30-2014, 05:56 PM

Quote:

Originally Posted by gringoloco

Thanks guys, for making me feel welcome. Had to stop by and see the trucks (and family). Been surfing the site and have a few ideas for the trucks when I get back...

Rut roh... Decide to put it under the knife?

gringoloco · 01-01-2015, 07:23 PM

Quote:

Originally Posted by BRUISER

Rut roh... Decide to put it under the knife?

I go back and forth about what exactly, but something will happen, that much we can count on...

SCOTI · 01-01-2015, 09:46 PM

Quote:

Originally Posted by gringoloco

I go back and forth about what exactly, but something will happen, that much we can count on...

LoL..... So subtle we are.

Chulisohombre · 02-01-2015, 05:22 PM

Wow great trucks. That interior is freekin awesome. Love the highlander tweed.

hold24 · 02-03-2015, 08:08 AM

Quote:

Originally Posted by gringoloco

I go back and forth about what exactly, but something will happen, that much we can count on...

Don't cut it Sell it too me I'm still interested... I'm ready when you are ...

Justin@EntropyRad · 02-03-2015, 05:22 PM

both the trucks are awesome

12-24-2013, 05:12 AM	#351
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: How To: Ruin a Perfectly Good K/5 how about i buy this truck from you (save this truck from you) for what you think is reasonable price, so you can get a nice 2wd.

12-31-2013, 09:42 AM	#356
jonesky2 Registered User Join Date: Nov 2009 Location: Hooper Utah Posts: 224	Re: How To: Ruin a Perfectly Good K/5 i would buy it. I dont know what a good starting price to offer. So whats your ballpark?

01-01-2014, 11:11 AM	#359
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,563	Re: How To: Ruin a Perfectly Good K/5 Man O Man... I think I would regret selling if it were mine. BUT... selling to a member is good... I guess ... lol

01-17-2014, 06:32 PM	#360
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How To: Ruin a Perfectly Good K/5 Saw this on Instagram Attached Images __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-17-2014, 08:43 PM	#361
TheBlueBomber Registered User Join Date: Feb 2013 Location: Cary, NC Posts: 816	Re: How To: Ruin a Perfectly Good K/5 You know... I thought I recognized this earlier!! __________________ Austin 1996 Chevrolet K1500 Silverado 1979 Chevrolet K10 Scottsdale - Carolina K10 - My 4.8L Twin turbo build - Project Short Stroke - Instagram - TheBlueBomber1996

12-27-2014, 09:03 PM	#363
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Got to see the old girls for a bit. Sure do miss 'em... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-27-2014, 09:27 PM	#364
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: How To: Ruin a Perfectly Good K/5 You back in the world?? Hope all is going well in your new path. Best wishes in the coming year! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

12-28-2014, 08:26 PM	#365
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Thanks! Just for a month for some training--headed back in a few days... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-29-2014, 12:30 PM	#368
69gmcc10 Registered User Join Date: May 2011 Location: Missoula, MT Posts: 934	Re: How To: Ruin a Perfectly Good K/5 Good to hear from you! Welcome back, even if it is only for a month! __________________ 69 GMC C10 build thread- http://67-72chevytrucks.com/vboard/s...d.php?t=501676 03 Silverado build thread-http://67-72chevytrucks.com/vboard/s...d.php?t=591582

12-30-2014, 05:48 PM	#369
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Thanks guys, for making me feel welcome. Had to stop by and see the trucks (and family). Been surfing the site and have a few ideas for the trucks when I get back... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-01-2015, 05:22 PM	#373
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: How To: Ruin a Perfectly Good K/5 Wow great trucks. That interior is freekin awesome. Love the highlander tweed. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

02-03-2015, 05:22 PM	#375
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: How To: Ruin a Perfectly Good K/5 both the trucks are awesome



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.