Project "Redemption" 68 SWB Fleetside - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

knomadd · 09-22-2016, 06:23 PM

Hey Keith, have you figured out what you're going to do for the fuel line connection at the fuel rail? I'm not sure what I want to do yet and I'm looking for ideas.

Bennett68C10 · 09-23-2016, 08:28 AM

Quote:

Originally Posted by knomadd

Hey Keith, have you figured out what you're going to do for the fuel line connection at the fuel rail? I'm not sure what I want to do yet and I'm looking for ideas.

Duane, I haven't gotten that far yet with the fuel system. I still have to install the fuel rails and injectors on the motor and run the fuel lines from the tank

Sorry I couldn't help more.

knomadd · 09-23-2016, 09:10 AM

No worries Keith. I'm in about the same spot. Just trying to plan ahead for when I do get there.

Bennett68C10 · 09-25-2016, 09:03 AM

Got some work done on the exhaust yesterday. I ended up sending the Black Widow mufflers back because I couldn't get them to fit and work the way I wanted to! Just not enough room with the rear Dropmember for what I want to do with the exhaust! I decided to go with some Borla S-Type mufflers. I ended up mounting them under the cab cause that's really the only place I had room to mount the mufflers and be able to run the side exhaust! Might be a little hot on the floorboards but some heat insulation should take care of that

Bennett68C10 · 09-25-2016, 09:05 AM

Then I ran the pipes out and over the frame between the two bed crossmembers! I'll finish off the rest when I mock the bed up and figure out where I want the tips to be! Still need to add some hangers to it as well.

gringoloco · 09-25-2016, 11:15 AM

Dig it. Nice and simple. Gonna keep the tips hidden?

jeh · 09-25-2016, 06:07 PM

I like how you did the exhaust Keith, how will the Borla mufflers sound????

Bennett68C10 · 09-26-2016, 09:25 AM

Quote:

Originally Posted by gringoloco

Dig it. Nice and simple. Gonna keep the tips hidden?

Thanks, not quite sure yet on the tips, I know I don't have much room when aired out

once I get the bed mocked up I'll get it figured out.

Quote:

Originally Posted by jeh

I like how you did the exhaust Keith, how will the Borla mufflers sound????

LOUD

I had the Borla S-type system on my 13 GMC and it sounded amazing with just a stock 5.3! Once I realized I only had room for some really small mufflers it was a no brainer to go with them!

Woodnears · 09-26-2016, 09:49 AM

please tell us more about what type of clamps and exhaust pipe you are using, its looking good! im in a similar spot in my build.

NewType72 · 09-26-2016, 11:48 AM

Exhaust routing looks very nice.

MMcMasters · 09-26-2016, 12:24 PM

Looking good Keith!

knomadd · 09-26-2016, 12:43 PM

That looks good Keith!

jwilb88 · 09-26-2016, 10:09 PM

Nice work man, Exhaust looks great

Bennett68C10 · 09-27-2016, 08:37 AM

Quote:

Originally Posted by Woodnears

please tell us more about what type of clamps and exhaust pipe you are using, its looking good! im in a similar spot in my build.

I got the clamps and the 2.5" universal rod builders exhaust kit from Summit Racing.

https://www.summitracing.com/parts/sum-692025/overview/

https://www.summitracing.com/parts/sum-670146/overview/

Quote:

Originally Posted by NewType72

Exhaust routing looks very nice.

Quote:

Originally Posted by MMcMasters

Looking good Keith!

Quote:

Originally Posted by knomadd

That looks good Keith!

Quote:

Originally Posted by jwilb88

Nice work man, Exhaust looks great

Thanks guys, I'm pretty happy with the way it turned out. Just have to do some finish welding and add some hangers to it.

boostedc10 · 09-27-2016, 09:21 AM

Quote:

Originally Posted by Bennett68C10

I got the clamps and the 2.5" universal rod builders exhaust kit from Summit Racing.

https://www.summitracing.com/parts/sum-692025/overview/

https://www.summitracing.com/parts/sum-670146/overview/

Thanks guys, I'm pretty happy with the way it turned out. Just have to do some finish welding and add some hangers to it.

Keith thanks for the links, I had no idea Summit had exhaust kits. Might have to look into them soon! Oh and your exhaust is looking good!

Bennett68C10 · 10-09-2016, 05:23 PM

Quote:

Originally Posted by boostedc10

Keith thanks for the links, I had no idea Summit had exhaust kits. Might have to look into them soon! Oh and your exhaust is looking good!

Thanks Brandon, I picked up some trick exhaust hangers from Stainless Works that I got from Summit Racing too! Got those installed this weekend!

69short · 10-09-2016, 06:56 PM

Looking good Keith

jeh · 10-09-2016, 08:10 PM

Everything is looking great Kieth.

Bennett68C10 · 10-10-2016, 08:50 AM

Quote:

Originally Posted by 69short

Looking good Keith

Quote:

Originally Posted by jeh

Everything is looking great Kieth.

Thanks guys, slow and steady

Bennett68C10 · 10-10-2016, 04:31 PM

Needed some inspiration before I start tackling the rust in the cab! I think I've got all I need now

Twisted78SS · 10-11-2016, 02:23 PM

Quote:

Originally Posted by Bennett68C10

Needed some inspiration before I start tackling the rust in the cab! I think I've got all I need now

Oh Hell Ya! Now that's some great inspiration right there..

**RRR18** · 10-10-2016, 04:52 PM

Holy piss!

MMcMasters · 10-10-2016, 06:42 PM

Drooling !!

RRC · 10-10-2016, 08:57 PM

Nice!!!

trkfrk · 10-10-2016, 10:42 PM

Looking good Keith! After following your last project dealing with the aftermarket sheet metal, I don't think the rust is going to slow you down at all!

09-22-2016, 06:23 PM	#1
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "Redemption" 68 SWB Fleetside Hey Keith, have you figured out what you're going to do for the fuel line connection at the fuel rail? I'm not sure what I want to do yet and I'm looking for ideas. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

09-23-2016, 09:10 AM	#3
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "Redemption" 68 SWB Fleetside No worries Keith. I'm in about the same spot. Just trying to plan ahead for when I do get there. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

09-25-2016, 09:03 AM	#4
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Got some work done on the exhaust yesterday. I ended up sending the Black Widow mufflers back because I couldn't get them to fit and work the way I wanted to! Just not enough room with the rear Dropmember for what I want to do with the exhaust! I decided to go with some Borla S-Type mufflers. I ended up mounting them under the cab cause that's really the only place I had room to mount the mufflers and be able to run the side exhaust! Might be a little hot on the floorboards but some heat insulation should take care of that Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-25-2016, 09:05 AM	#5
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Then I ran the pipes out and over the frame between the two bed crossmembers! I'll finish off the rest when I mock the bed up and figure out where I want the tips to be! Still need to add some hangers to it as well. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-25-2016, 11:15 AM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Project "Redemption" 68 SWB Fleetside Dig it. Nice and simple. Gonna keep the tips hidden? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

09-25-2016, 06:07 PM	#7
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Project "Redemption" 68 SWB Fleetside I like how you did the exhaust Keith, how will the Borla mufflers sound???? __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

09-26-2016, 09:49 AM	#9
Woodnears Registered User Join Date: Feb 2010 Location: Dodge city Ks Posts: 620	Re: Project "Redemption" 68 SWB Fleetside please tell us more about what type of clamps and exhaust pipe you are using, its looking good! im in a similar spot in my build. __________________ My Build Thread Here http://67-72chevytrucks.com/vboard/s...d.php?t=457417

09-26-2016, 11:48 AM	#10
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: Project "Redemption" 68 SWB Fleetside Exhaust routing looks very nice. __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

09-26-2016, 12:24 PM	#11
MMcMasters Registered User Join Date: Dec 2012 Location: Rochester, IL Posts: 537	Re: Project "Redemption" 68 SWB Fleetside Looking good Keith! __________________ __________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66

09-26-2016, 12:43 PM	#12
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Project "Redemption" 68 SWB Fleetside That looks good Keith! __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

09-26-2016, 10:09 PM	#13
jwilb88 Registered User Join Date: May 2016 Location: Lucedale, Ms Posts: 61	Re: Project "Redemption" 68 SWB Fleetside Nice work man, Exhaust looks great __________________ 67 Short Step http://67-72chevytrucks.com/vboard/s...d.php?t=706656

10-09-2016, 06:56 PM	#17
69short Registered User Join Date: May 2012 Location: DeKalb, MO Posts: 508	Re: Project "Redemption" 68 SWB Fleetside Looking good Keith __________________ -Justin '69 SWB \| Zoie Jane \| Porterbuilt, LQ9, 20"/22" wheels

10-09-2016, 08:10 PM	#18
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Project "Redemption" 68 SWB Fleetside Everything is looking great Kieth. __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

10-10-2016, 04:31 PM	#20
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Redemption" 68 SWB Fleetside Needed some inspiration before I start tackling the rust in the cab! I think I've got all I need now Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-10-2016, 04:52 PM	#22
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Project "Redemption" 68 SWB Fleetside Holy piss! __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan



Register or Log In To remove these advertisements.

10-10-2016, 06:42 PM	#23
MMcMasters Registered User Join Date: Dec 2012 Location: Rochester, IL Posts: 537	Re: Project "Redemption" 68 SWB Fleetside Drooling !! __________________ __________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66

10-10-2016, 08:57 PM	#24
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Project "Redemption" 68 SWB Fleetside Nice!!! __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

10-10-2016, 10:42 PM	#25
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: Project "Redemption" 68 SWB Fleetside Looking good Keith! After following your last project dealing with the aftermarket sheet metal, I don't think the rust is going to slow you down at all! __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

Register or Log In To remove these advertisements.