The Ulitmate Craigslist find thread - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stsalvage · 02-21-2018, 09:26 PM

So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

C10 - C90 Bill · 02-22-2018, 12:56 AM

Quote:

Originally Posted by stsalvage

Can you make the 2 speed slitter work with the Allison

I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

NoStopN · 02-23-2018, 08:05 PM

Quote:

Originally Posted by stsalvage

So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove

Can you make the 2 speed slitter work with the Allison

It's just personal choice. A factory 6.0 LS (364 cubic in.) is only rated for 380 lb.-ft. of torque. That's more than most engines from the '60s, but even the earliest Duramax makes around 500 lb.-ft. Honestly, I can't speak as to what would fit with a split rear end, but you could attempt to contact Advanced Adapters. They claim they make the widest selection of adapters. Even if they would help on that kind of project, you (or whomever) would be the first ones to do it. You might have better luck getting an adapter made for mating the Duramax to a manual transmission that can handle the torque. You can take all of this talk into consultation, because I really know very little about trucks larger than a C30/GMC 3500.

Dannny B · 02-23-2018, 09:59 PM

Quote:

Originally Posted by C10 - C90 Bill

I believe you are referring to a 2-Speed Rear and I've never driven one with an Auto Trans, but I have heard that yes, it is supposed to work.

I played mix-an-match with a 392, 4 Bbl IH and an Allison in a truck with an Eaton 2 speed axle.. Just back off a tiny bit and shift. It wokled fine.

5Tractorguy · 02-25-2018, 12:29 PM

I can't get enough of this one...

https://syracuse.craigslist.org/cto/...492479895.html

Name: 00P0P_j5tKbCYNE6u_1200x900.jpg
Views: 832
Size: 49.2 KB

Dannny B · 02-21-2018, 11:26 PM

Quote:

Originally Posted by C10 - C90 Bill

I've got a different idea for the LCF, lol.

A 4-53T Detroit with a 10-Speed Road Ranger.

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

83GMCK2500 · 02-21-2018, 11:31 PM

Quote:

Originally Posted by Dannny B

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Naaaaaaaah!

I'm with Bill on that choice. When I was old enough to ride with my dad in his Astro 95 moving pieces of his farm equipment I used to fall asleep to the sound of the 6-71 under me.

C10 - C90 Bill · 02-22-2018, 12:48 AM

Quote:

Originally Posted by Dannny B

,,,,, And a case of earplugs.
https://www.youtube.com/watch?v=7368eCCwr6A

Lol, I used to own a '67 7500 that sounded exactly like this one with the 6V-53:

You Tube

C10 - C90 Bill · 02-25-2018, 01:26 PM

I believe that truck has the 503 in it.

sweetk30 · 02-25-2018, 07:10 PM

1hr ish east of me also .

b454rat · 02-25-2018, 09:36 PM

Bout 20-25 minutes from me.....

5Tractorguy · 03-01-2018, 07:30 PM

Another one!!

https://norfolk.craigslist.org/cto/d...498097144.html

Name: 00m0m_kYbOqgYUIaV_1200x900.jpg
Views: 744
Size: 52.9 KB

5Tractorguy · 03-05-2018, 08:56 AM

A nice B series.

https://chicago.craigslist.org/nch/c...482890825.html

Name: 01515_5pPYGDSC8Ja_600x450.jpg
Views: 619
Size: 29.7 KB

C10 - C90 Bill · 03-05-2018, 09:47 AM

Interesting truck.

Sheet Metal is pretty nice.

sweetk30 · 03-05-2018, 11:06 AM

top of windshield frame hand top of a-pillers have some crusty rust showing . . . i know it can be fixed but there is some major work .

does look fairly solid otherwise for sure.

5Tractorguy · 03-07-2018, 05:42 PM

A beautiful '48 GMC

https://cleveland.craigslist.org/cto...501645077.html

Name: 00n0n_2KnUYrLaLwK_1200x900.jpg
Views: 694
Size: 53.3 KB

83GMCK2500 · 03-07-2018, 06:54 PM

Quote:

Originally Posted by 5Tractorguy

A beautiful '48 GMC

https://cleveland.craigslist.org/cto...501645077.html

Attachment 1760532

Holy crap. That's a show truck...

Must save all of the pics.

*Peanutbutter* · 03-07-2018, 09:42 PM

WOW, what a piece of history, gotta grab all the pics before their gone.

jumpsoffrock · 03-08-2018, 03:18 PM

That is one of the few trucks I can say has a very honest price.

*Peanutbutter* · 03-09-2018, 12:23 AM

what year did GMC go to wind wings? My dad had a 49 chevy and it still did not have wind wings. are those doors legit?

**HO455** · 03-11-2018, 09:11 AM

Quote:

Originally Posted by Peanutbutter

what year did GMC go to wind wings? My dad had a 49 chevy and it still did not have wind wings. are those doors legit?

I believe it was in 51. My 51 has one piece window doors on it and every so often somebody comments "That can't be a 51 it doesn't have wing windows." I really don't know if they were replaced or if it came from the factory that way as we bought it that way back in 89.

**HO455** · 03-11-2018, 12:55 PM

Not many of these left in original condition with seats.

https://seattle.craigslist.org/see/a...523739075.html

We have a great running 1963 school bus that was a church bus in Eastern Washington. Runs great, interior immaculate and body in great condition and ready for you to design your own camper or tiny house. Ready to drive to Lake Washington or to New York. Here is the following work that has been completed:

New points, plugs, points, condenser, cap, rotor, plug wires. New starter and alternator. Battery holder, alternator bracket, fan belt. Replaced exhaust manifold and intake/exhaust v. Replaced all the brake wheel cylinders had brake shoes, relined via Napa. Cleaned fuel tank, rebuilt fuel sending unit. Cleaned and repacked front wheel bearings, lubricated the front end, ball joints tie rod ends.

Clear Title
Straight six manual
Chevy
Regular Gas
Tires in good condition
We drove it from Eastern Washington to Seattle. Bus is solid but your not gonna go 70 in it

but it will get you to New York if you need it to.

Greg63 · 03-12-2018, 08:00 AM

Quote:

Originally Posted by HO455

Not many of these left in original condition with seats.

https://seattle.craigslist.org/see/a...523739075.html

We have a great running 1963 school bus that was a church bus in Eastern Washington. Runs great, interior immaculate and body in great condition and ready for you to design your own camper or tiny house. Ready to drive to Lake Washington or to New York. Here is the following work that has been completed:

New points, plugs, points, condenser, cap, rotor, plug wires. New starter and alternator. Battery holder, alternator bracket, fan belt. Replaced exhaust manifold and intake/exhaust v. Replaced all the brake wheel cylinders had brake shoes, relined via Napa. Cleaned fuel tank, rebuilt fuel sending unit. Cleaned and repacked front wheel bearings, lubricated the front end, ball joints tie rod ends.

Clear Title
Straight six manual
Chevy
Regular Gas
Tires in good condition
We drove it from Eastern Washington to Seattle. Bus is solid but your not gonna go 70 in it

but it will get you to New York if you need it to.

Great candidate for S'Cool Bus;

*Peanutbutter* · 03-09-2018, 12:26 AM

this is a really nice truck, is it to nice?

NoStopN · 03-10-2018, 11:57 PM

https://shoals.craigslist.org/grd/d/...499877020.html

02-21-2018, 09:26 PM	#1
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: The Ulitmate Craigslist find thread So your saying the 6.0 LS with the Allison is not a good combo for the C40--C80 1964--66 trucks.Can you explain why the 366 or 6.0 LS engine would not be a good combo.The Duramax V8 with an Allison.its a little pricey.I just want to know what are the take a way's from using the gas to using the Duramax.I've had a 1964 c60 a few years ago love the body stance and the way they looked and how they drove Can you make the 2 speed slitter work with the Allison

02-25-2018, 12:29 PM	#5
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread I can't get enough of this one... https://syracuse.craigslist.org/cto/...492479895.html __________________ Jake 5Tractorguy on Youtube

02-25-2018, 01:26 PM	#9
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,067	Re: The Ulitmate Craigslist find thread I believe that truck has the 503 in it. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

02-25-2018, 07:10 PM	#10
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: The Ulitmate Craigslist find thread 1hr ish east of me also . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

02-25-2018, 09:36 PM	#11
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: The Ulitmate Craigslist find thread Bout 20-25 minutes from me..... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

03-01-2018, 07:30 PM	#12
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread Another one!! https://norfolk.craigslist.org/cto/d...498097144.html __________________ Jake 5Tractorguy on Youtube

03-05-2018, 08:56 AM	#13
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread A nice B series. https://chicago.craigslist.org/nch/c...482890825.html __________________ Jake 5Tractorguy on Youtube

03-05-2018, 09:47 AM	#14
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,067	Re: The Ulitmate Craigslist find thread Interesting truck. Sheet Metal is pretty nice. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

03-05-2018, 11:06 AM	#15
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: The Ulitmate Craigslist find thread top of windshield frame hand top of a-pillers have some crusty rust showing . . . i know it can be fixed but there is some major work . does look fairly solid otherwise for sure. __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-07-2018, 05:42 PM	#16
5Tractorguy Registered User Join Date: May 2015 Location: Central Massachusetts Posts: 495	Re: The Ulitmate Craigslist find thread A beautiful '48 GMC https://cleveland.craigslist.org/cto...501645077.html __________________ Jake 5Tractorguy on Youtube

03-07-2018, 09:42 PM	#18
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: The Ulitmate Craigslist find thread WOW, what a piece of history, gotta grab all the pics before their gone. Last edited by Peanutbutter; 03-07-2018 at 10:02 PM.

03-08-2018, 03:18 PM	#19
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 926	Re: The Ulitmate Craigslist find thread That is one of the few trucks I can say has a very honest price.

03-09-2018, 12:23 AM	#20
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: The Ulitmate Craigslist find thread what year did GMC go to wind wings? My dad had a 49 chevy and it still did not have wind wings. are those doors legit?

03-11-2018, 12:55 PM	#22
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 10,904	Re: The Ulitmate Craigslist find thread Not many of these left in original condition with seats. https://seattle.craigslist.org/see/a...523739075.html We have a great running 1963 school bus that was a church bus in Eastern Washington. Runs great, interior immaculate and body in great condition and ready for you to design your own camper or tiny house. Ready to drive to Lake Washington or to New York. Here is the following work that has been completed: New points, plugs, points, condenser, cap, rotor, plug wires. New starter and alternator. Battery holder, alternator bracket, fan belt. Replaced exhaust manifold and intake/exhaust v. Replaced all the brake wheel cylinders had brake shoes, relined via Napa. Cleaned fuel tank, rebuilt fuel sending unit. Cleaned and repacked front wheel bearings, lubricated the front end, ball joints tie rod ends. Clear Title Straight six manual Chevy Regular Gas Tires in good condition We drove it from Eastern Washington to Seattle. Bus is solid but your not gonna go 70 in it but it will get you to New York if you need it to. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

03-09-2018, 12:26 AM	#24
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: The Ulitmate Craigslist find thread this is a really nice truck, is it to nice?



Register or Log In To remove these advertisements.

03-10-2018, 11:57 PM	#25
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: The Ulitmate Craigslist find thread https://shoals.craigslist.org/grd/d/...499877020.html __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

Register or Log In To remove these advertisements.