Project "Just an Old Truck" - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10_ustacould · 02-22-2013, 01:40 AM

Big brown came today...

jmedero · 02-22-2013, 01:47 AM

Woohoo!!!
Posted via Mobile Device

Rusbuilt · 02-22-2013, 08:58 AM

Oh me likey!

**lolife99** · 02-22-2013, 09:32 AM

Nice!
Are those rotors coated with something?

**cericd** · 02-22-2013, 10:39 AM

Looking good!

Hey Buck, what's the verdict on those axles? I considering ordering a set.

C10_ustacould · 02-22-2013, 11:24 AM

Quote:

Originally Posted by lolife99

Nice!
Are those rotors coated with something?

No, just the natural finish. I really should paint the hats, but you can look at my truck and see I'm not much for painting.

Quote:

Originally Posted by cericd

Looking good!

Hey Buck, what's the verdict on those axles? I considering ordering a set.

They fit well and the materials and construction appear to pretty nice. I think they will work fine, but some miles will be a better test. For $158 delivered they are worth a try.

zacthrasher · 02-22-2013, 07:02 PM

Very nice truck!

I may have missed it in your thread but I am going to ask anyways. Where did you get your rear end housing? I have an original 67 under my truck and the width is going to require me to run spacers with just about any wheel I look at, unless I buy a custom wheel. It needs to be rebuilt anyways and if I could find a good housing I could buy a cheaper wheel that I like and afford to fix the rear end. Therefore I have been trying to find a wider rear end. Thanks!

C10_ustacould · 02-22-2013, 07:18 PM

Quote:

Originally Posted by zacthrasher

Very nice truck!

I may have missed it in your thread but I am going to ask anyways. Where did you get your rear end housing? I have an original 67 under my truck and the width is going to require me to run spacers with just about any wheel I look at, unless I buy a custom wheel. It needs to be rebuilt anyways and if I could find a good housing I could buy a cheaper wheel that I like and afford to fix the rear end. Therefore I have been trying to find a wider rear end. Thanks!

I was originally going to build a '70 swb fleet starting with just a frame and a cab. I bought a rolling swb chassis that was a '70 model and had the wider rear axle housing. I am sure you can find one in a salvage yard near you. Good Luck!

shawno72 · 02-22-2013, 09:30 PM

Very nice, what kit did you use?

C10_ustacould · 02-22-2013, 10:16 PM

Shawn, I used the 1967-70 Rear Disc Brake Kit 5-lug w/ E-brake, kit (6772RWBK-5E) from CPP. Probably 75% complete but I am taking the night off, I'll finish up tomorrow.

shawno72 · 02-22-2013, 10:18 PM

Good deal Buck. Don't forget to change your proportioning valve

Posted via Mobile Device

C10_ustacould · 02-22-2013, 10:21 PM

I think I'm going to do the proportioning valve (pv) mod to my existing pv. Read about on the CPP site.

shawno72 · 02-22-2013, 11:00 PM

Good deal
Posted via Mobile Device

C10_ustacould · 02-23-2013, 07:46 PM

The jury is still out on my proportioning valve mod, the brakes seem spongy to me. I am done for today, will bleed them some more in the morning and see if I will need to order a disc/disc pv.
Posted via Mobile Device

C10_ustacould · 02-24-2013, 10:31 AM

I am happy with the wheel placement and the disc brakes look much better than the big ugly drum!

RRC · 02-24-2013, 10:34 AM

Posted via Mobile Device Wheel placement looks perfect!!! Disc brake's really do improve the look!!!

Rusbuilt · 02-24-2013, 10:57 AM

Those wheels look so good!

Portmod7 · 02-24-2013, 12:01 PM

Mmmmmm.... 4-wheel discs, love it! Wheel placement looks great as well.

C10_ustacould · 02-24-2013, 12:48 PM

Parts for the next stage... PB forward arms. Thanks Bennett--G4L!

**lolife99** · 02-24-2013, 12:57 PM

Quote:

Originally Posted by BucksSS

Parts for the next stage... PB forward arms. Thanks Bennett--G4L!

Very nice!
You are buying some quality parts.

Chvy2NV · 02-24-2013, 01:01 PM

how did i overlook this build!!! i just went thru the whole thing. awesome truck Buck.. its a great inspiration for my build. Wish you and Rob were closer so we could wrench and cruise together. keep the pics coming

C10_ustacould · 02-24-2013, 01:28 PM

Quote:

Originally Posted by lolife99

Very nice!
You are buying some quality parts.

It's funny you say that, I am thinking about doing a thread about all of the things I believe I've done wrong on this build. Now I need some PB parts to center the rear wheels too, I guess I'm going to have to contact Nate directly.

Quote:

Originally Posted by Chvy2NV

how did i overlook this build!!! i just went thru the whole thing. awesome truck Buck.. its a great inspiration for my build. Wish you and Rob were closer so we could wrench and cruise together. keep the pics coming

Thanks, I am trying my best to build a solid driver. You never know, when Rob gets his LS swap done we may just swing down your way for a visit!

jmedero · 02-24-2013, 01:41 PM

Road trip!!!
Posted via Mobile Device

**yote1234** · 02-24-2013, 02:26 PM

very nice. great patina!

**Hart_Rod** · 02-24-2013, 02:44 PM

Quote:

Originally Posted by BucksSS

Parts for the next stage... PB forward arms. Thanks Bennett--G4L!

Nice!
Posted via Mobile Device

02-22-2013, 01:40 AM	#426
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" Big brown came today... Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-22-2013, 01:47 AM	#427
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Project "Just an Old Truck" Woohoo!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-22-2013, 08:58 AM	#428
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Oh me likey! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-22-2013, 09:32 AM	#429
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Project "Just an Old Truck" Nice! Are those rotors coated with something? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-22-2013, 10:39 AM	#430
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,125	Re: Project "Just an Old Truck" Looking good! Hey Buck, what's the verdict on those axles? I considering ordering a set. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

02-22-2013, 07:02 PM	#432
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Project "Just an Old Truck" Very nice truck! I may have missed it in your thread but I am going to ask anyways. Where did you get your rear end housing? I have an original 67 under my truck and the width is going to require me to run spacers with just about any wheel I look at, unless I buy a custom wheel. It needs to be rebuilt anyways and if I could find a good housing I could buy a cheaper wheel that I like and afford to fix the rear end. Therefore I have been trying to find a wider rear end. Thanks! __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

02-22-2013, 09:30 PM	#434
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "Just an Old Truck" Very nice, what kit did you use? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-22-2013, 10:16 PM	#435
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" Shawn, I used the 1967-70 Rear Disc Brake Kit 5-lug w/ E-brake, kit (6772RWBK-5E) from CPP. Probably 75% complete but I am taking the night off, I'll finish up tomorrow. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-22-2013, 10:18 PM	#436
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "Just an Old Truck" Good deal Buck. Don't forget to change your proportioning valve Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-22-2013, 10:21 PM	#437
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" I think I'm going to do the proportioning valve (pv) mod to my existing pv. Read about on the CPP site. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-22-2013, 11:00 PM	#438
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "Just an Old Truck" Good deal Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-23-2013, 07:46 PM	#439
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" The jury is still out on my proportioning valve mod, the brakes seem spongy to me. I am done for today, will bleed them some more in the morning and see if I will need to order a disc/disc pv. Posted via Mobile Device __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD Last edited by C10_ustacould; 02-24-2013 at 11:13 AM.

02-24-2013, 10:31 AM	#440
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" I am happy with the wheel placement and the disc brakes look much better than the big ugly drum! Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-24-2013, 10:34 AM	#441
RRC Registered User Join Date: May 2012 Location: Moose Jaw Saskatchewan Canada Posts: 1,099	Re: Project "Just an Old Truck" Posted via Mobile Device Wheel placement looks perfect!!! Disc brake's really do improve the look!!! __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=563712 Instagram: http://instagram.com/rockylakekustoms Rocky Lake Kustoms Russ

02-24-2013, 10:57 AM	#442
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Those wheels look so good! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*



Register or Log In To remove these advertisements.

02-24-2013, 12:01 PM	#443
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Project "Just an Old Truck" Mmmmmm.... 4-wheel discs, love it! Wheel placement looks great as well. __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

02-24-2013, 12:48 PM	#444
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: Project "Just an Old Truck" Parts for the next stage... PB forward arms. Thanks Bennett--G4L! Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-24-2013, 01:01 PM	#446
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Project "Just an Old Truck" how did i overlook this build!!! i just went thru the whole thing. awesome truck Buck.. its a great inspiration for my build. Wish you and Rob were closer so we could wrench and cruise together. keep the pics coming

02-24-2013, 01:41 PM	#448
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: Project "Just an Old Truck" Road trip!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-24-2013, 02:26 PM	#449
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,286	Re: Project "Just an Old Truck" very nice. great patina! __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

Register or Log In To remove these advertisements.