1971 c10 stepside - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 03-18-2012, 10:10 AM

Quote:

Originally Posted by raull

i sprayed the inside of them today and ill start the butchering of the fenders tomorrow , ill post some pix when done installing them

What did you spray the inside of the tubz with. Can't wait to see some pics

raull · 03-18-2012, 11:37 AM

Quote:

Originally Posted by Bennett--G4L

What did you spray the inside of the tubz with. Can't wait to see some pics

hello keith if you go to my post #87 you will see what i used to do the frame and i also used it on the tubz , i love that stuff , i may do engine bay with it as im not looking for the smooth paint finish in this build , this stuff is semi gloss and it leaves a small texture look to it at the same time , may not be for everybody but it works for me , here are some pix and my first cut !!!!

raull · 03-18-2012, 03:25 PM

finally done with the right side , my pops its here going overboard with the engine hoist ( lol ) so he's keeping me away from truck , the truck now drop another inch or so , the bag is bottom out now , that all she sang , im good with that , still some triming issues then im good , some pix

**67cheby** · 03-18-2012, 04:04 PM

Hey those look great
Posted via Mobile Device

Bennett68C10 · 03-18-2012, 04:30 PM

Quote:

Originally Posted by raull

hello keith if you go to my post #87 you will see what i used to do the frame and i also used it on the tubz , i love that stuff , i may do engine bay with it as im not looking for the smooth paint finish in this build , this stuff is semi gloss and it leaves a small texture look to it at the same time , may not be for everybody but it works for me , here are some pix and my first cut !!!!

Thanks Raull, I went back and looked. I was thinking about doing the same thing painting the tubz on the inside with bedliner. Tubz are looking good in there.
Posted via Mobile Device

big_al_71 · 03-18-2012, 05:56 PM

Good job .......Raulito....

raull · 03-18-2012, 06:15 PM

Quote:

Originally Posted by 67cheby

Hey those look great
Posted via Mobile Device

Quote:

Originally Posted by Bennett--G4L

Thanks Raull, I went back and looked. I was thinking about doing the same thing painting the tubz on the inside with bedliner. Tubz are looking good in there.
Posted via Mobile Device

Quote:

Originally Posted by big_al_71

Good job .......Raulito....

,

thanks guys , finish cutting other side but im done ill install it tomorow, we finished the hoist center support but now pops wants to modify the hoist roller bracket, he's not happy with it , perfectionist , lol we will finish it one day , here is a pix with the rear of truck lifted with hoist ,

72BlckButy · 03-18-2012, 06:21 PM

Nice work.

Any more pics of the inner install?

raull · 03-18-2012, 06:27 PM

Quote:

Originally Posted by 72BlckButy

Nice work.

Any more pics of the inner install?

thanks nate , tomorrow when i get home ill install the left side then ill roll it out hopefully still daylight and ill take some pix

raull · 03-19-2012, 10:06 PM

i finished the tubz install today , they look awesome , i only put a couple of bolts on just to see the look, i already took them back off to put back in storage so i can continue the builb , also did the install of the cpp ls motor coversion mounts brackets , in one of the pictures you can see the advantage of the tubz , the crossmember no is 1/4 of an inch of the ground , here are some pix

big_al_71 · 03-19-2012, 10:14 PM

Looking awesome... I posted a picture of your truck in the thread about bagged trucks...
Posted via Mobile Device

raull · 03-19-2012, 10:39 PM

Quote:

Originally Posted by big_al_71

Looking awesome... I posted a picture of your truck in the thread about bagged trucks...
Posted via Mobile Device

cool send me the link !!!

jmedero · 03-19-2012, 11:04 PM

I didn't know you were going to go with tubz. Looks good man.
Posted via Mobile Device

raull · 03-19-2012, 11:11 PM

Quote:

Originally Posted by jmedero

I didn't know you were going to go with tubz. Looks good man.
Posted via Mobile Device

sorry bud , i thought you knew , i posted the pix when i got them back on 10/20/11on post #130

jmedero · 03-19-2012, 11:13 PM

Nice.
Posted via Mobile Device

raull · 03-19-2012, 11:16 PM

if you are not up to fab your own this is the way to go , they are nice

**67cheby** · 03-19-2012, 11:17 PM

Quote:

Originally Posted by jmedero

I didn't know you were going to go with tubz. Looks good man.
Posted via Mobile Device

Didn't you hear ?? It's what all the cool people are doing !!! LOL, looks great Raull
Posted via Mobile Device

raull · 03-19-2012, 11:22 PM

Quote:

Originally Posted by 67cheby

Didn't you hear ?? It's what all the cool people are doing !!! LOL, looks great Raull
Posted via Mobile Device

thanks mike, and also for your help the other day

**67cheby** · 03-19-2012, 11:31 PM

Anytime , thank you
Posted via Mobile Device

jmedero · 03-20-2012, 12:18 AM

Ohhhh the peer presure.
Posted via Mobile Device

Bennett68C10 · 03-20-2012, 08:22 AM

Sweet does that mean I'm a cool person for going with the Tubz

Looks great Raull, your giving me inspiration

raull · 03-20-2012, 08:38 AM

Quote:

Originally Posted by Bennett--G4L

Sweet does that mean I'm a cool person for going with the Tubz

Looks great Raull, your giving me inspiration

thanks keith but the one inspired was me , after lacking for a few month some of you guys were rolling so i have to gear up to keep up with you guys

**CC69Rat** · 03-20-2012, 09:20 AM

.. oh, to bag or not to bag ..

My goodness that truck is incredible. ..

**lolife99** · 03-20-2012, 09:30 AM

Raull,... your truck looks beautiful!
I still want a set of those wheels.

Any reason you are leaving the 3-speed crossmember in it?

**67cheby** · 03-20-2012, 09:58 AM

Quote:

Originally Posted by CC69Rat

.. oh, to bag or not to bag ..

My goodness that truck is incredible. ..

think about how much money it will save you in insurance, when you tell them your truck has 4 air bags !!

03-18-2012, 03:25 PM	#453
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside finally done with the right side , my pops its here going overboard with the engine hoist ( lol ) so he's keeping me away from truck , the truck now drop another inch or so , the bag is bottom out now , that all she sang , im good with that , still some triming issues then im good , some pix Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-18-2012, 04:04 PM	#454
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside Hey those look great Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-18-2012, 05:56 PM	#456
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Good job .......Raulito.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-18-2012, 06:21 PM	#458
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1971 c10 stepside Nice work. Any more pics of the inner install? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

03-19-2012, 10:06 PM	#460
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside i finished the tubz install today , they look awesome , i only put a couple of bolts on just to see the look, i already took them back off to put back in storage so i can continue the builb , also did the install of the cpp ls motor coversion mounts brackets , in one of the pictures you can see the advantage of the tubz , the crossmember no is 1/4 of an inch of the ground , here are some pix Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-19-2012, 10:14 PM	#461
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Looking awesome... I posted a picture of your truck in the thread about bagged trucks... Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-19-2012, 11:04 PM	#463
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside I didn't know you were going to go with tubz. Looks good man. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-19-2012, 11:13 PM	#465
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Nice. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-19-2012, 11:16 PM	#466
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside if you are not up to fab your own this is the way to go , they are nice __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

03-19-2012, 11:31 PM	#469
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside Anytime , thank you Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-20-2012, 12:18 AM	#470
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Ohhhh the peer presure. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-20-2012, 08:22 AM	#471
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1971 c10 stepside Sweet does that mean I'm a cool person for going with the Tubz Looks great Raull, your giving me inspiration __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

03-20-2012, 09:20 AM	#473
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: 1971 c10 stepside .. oh, to bag or not to bag .. My goodness that truck is incredible. .. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-20-2012, 09:30 AM	#474
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: 1971 c10 stepside Raull,... your truck looks beautiful! I still want a set of those wheels. Any reason you are leaving the 3-speed crossmember in it? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.