NE 65 Chevy 1/2 66 Chevy 3/4 Part Out

[inkfamous13]

Looking for complete from crossmember wheel to wheel and a coil spring rear end 6 lug c10 and i need choke knob, pass side long bed thick top molding, both pass moldings and bottom cab drivers lil moulding. And need arm rests and drivers vent knob. Ive got a c20 ive gotta get rid of these 8 lugs and super low geared rear. Got a nv-540 od 5 spd trans and still cant top 60 on highway. My number is 4426009184 txt me just say truck parts online

[paulspickupparts]

Originally Posted by inkfamous13

Looking for complete from crossmember wheel to wheel and a coil spring rear end 6 lug c10 and i need choke knob, pass side long bed thick top molding, both pass moldings and bottom cab drivers lil moulding. And need arm rests and drivers vent knob. Ive got a c20 ive gotta get rid of these 8 lugs and super low geared rear. Got a nv-540 od 5 spd trans and still cant top 60 on highway. My number is 4426009184 txt me just say truck parts online

I have the crossmember and coil spring rear end. The biggest problem ends up being shipping. It usually ends up killing the deal. I do not think my bed moldings are good enough. Thanks Paul

[Oldgmc1963]

Hi Paul and thank you in advance for fielding this. If you have them and in decent shape, I am looking for a pair of rear parking brake cables from the 3/4 ton.

Rob

[paulspickupparts]

Originally Posted by Oldgmc1963

Hi Paul and thank you in advance for fielding this. If you have them and in decent shape, I am looking for a pair of rear parking brake cables from the 3/4 ton.

Rob

Hi Rob . Thanks for your inquiry. I do not have the brake cables . I beleive I sold them last fall when we parted the truck out. I do get them in from time to time but do not have anything now. Thanks Paul

[Oldgmc1963]

Many thanks for the reply. Keep me in mind.

Rob

[jmader]

Do you have an extra frame crossmember that goes above the rear coil springs?

[paulspickupparts]

Originally Posted by jmader

Do you have an extra frame crossmember that goes above the rear coil springs?

I should have it . Would have to check condition but should be fine.

[jmader]

Originally Posted by paulspickupparts

I should have it . Would have to check condition but should be fine.

Ok thanks. Let me know what you find.

[paulspickupparts]

Ok , I will have to pull a box off and will probably just cut the frame off of another 65 I am parting. Is this the crossmember with the upper shock mounts attached to it. I should have but to make sure . Price will be $40. Let me know it this is ok and I will get one off.

[jmader]

Originally Posted by paulspickupparts

Ok , I will have to pull a box off and will probably just cut the frame off of another 65 I am parting. Is this the crossmember with the upper shock mounts attached to it. I should have but to make sure . Price will be $40. Let me know it this is ok and I will get one off.

Yes it's directly above the rear axle. $40 sounds good

[edisonfire]

is the front bumper available or just the brackets? and shipping to 73112?

[paulspickupparts]

Originally Posted by edisonfire

is the front bumper available or just the brackets? and shipping to 73112?

Bumper is available but not very good condition so did not list it. Thanks

[Mike Wessinger]

Do you still have the vent windows?

Mike

[paulspickupparts]

Originally Posted by Mike Wessinger

Do you still have the vent windows?

Mike

Hi Mike, I have sold one set but will take another set out. You are first in line.

[Mike Wessinger]

Originally Posted by paulspickupparts

Hi Mike, I have sold one set but will take another set out. You are first in line.

Yes please. I will PM you my address and send payment when you can get the total with shipping/

Thanks

[fleetman]

Hello. Looking for door window clear . drivers side if that makes difference.
34698. Tampa area.
If you have one. Thanks.
Paul.

[paulspickupparts]

Originally Posted by fleetman

Hello. Looking for door window clear . drivers side if that makes difference.
34698. Tampa area.
If you have one. Thanks.
Paul.

Paul , I do have a door window but shipping glass is a difficult to say the least. I had to resort to building wood crates which became very expensive. I still ship vent windows as I can pack them safely but sheet glass is a challenge and usually ends up broken if not in a wooden crate. Thanks

[Ghernandez66]

Are the center windows still available? if they are I'll take them

[Ghernandez66]

Originally Posted by Ghernandez66

Are the center windows still available? if they are I'll take them

Vent windows sorry

[paulspickupparts]

Originally Posted by Ghernandez66

Vent windows sorry

I should have several sets. I will take another couple sets out on Monday . Mike has first choice. Thanks

[diver]

hi do you have am radio and hardware nice face thanks

[paulspickupparts]

I do in the truck pictured but not sure of condition . Usually by now the faces show same wear and may or may not work.

[paulspickupparts]

Originally Posted by diver

hi do you have am radio and hardware nice face thanks

Here are some pics of one of the radios I have that is still in the truck . Thanks

[Ghernandez66]

Originally Posted by paulspickupparts

I should have several sets. I will take another couple sets out on Monday . Mike has first choice. Thanks

alright' keep us updated thanks

[paulspickupparts]

Originally Posted by Ghernandez66

alright' keep us updated thanks

Set 2 set of vent windows sold to Ghernadez66 . Will ship tomorrow first thing. . Tracking # sent via PM. Thanks again.