OR Parting 1972 C30 350/TH400 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLTruck1973 · 01-20-2015, 05:02 PM

Quote:

Originally Posted by DLTruck1973

Hello,

You are looking at $58.00 shipped to your door. I will send you a private message with paypal information.

Thank you,
Thomas

I circled it in red.

Thank you,
Thomas

Todds69 · 01-20-2015, 05:06 PM

Quote:

Originally Posted by DLTruck1973

I circled it in red.

Thank you,
Thomas

Yep I'm officially blind lol. Thanks!

DLTruck1973 · 01-20-2015, 06:03 PM

Quote:

Originally Posted by Todds69

Yep I'm officially blind lol. Thanks!

Not a problem. I have this ready to ship. Waiting for your decision on the clutch linkage hole plug.

Let me know. I need to be ready to ship before 4 pm pacific time (7 pm eastern)

Thank you again,
Thomas

**PICKMUP** · 01-20-2015, 06:48 PM

How much for the cab? with doors? condition?
thanks, frank

**too much stuff** · 01-20-2015, 07:20 PM

Will pass on the emblem. thanks.

**jimer1964** · 01-20-2015, 07:36 PM

Quote:

Originally Posted by PICKMUP

How much for the cab? with doors? condition?
thanks, frank

I was thinking the same nice truck to be parting out!

**cst204x4** · 01-20-2015, 08:20 PM

Looks good will it include prop. Valve and small lines? Price shipped to 48817

DLTruck1973 · 01-20-2015, 08:22 PM

Quote:

Originally Posted by PICKMUP

How much for the cab? with doors? condition?
thanks, frank

Hi Frank,

We are going to look it over real close and get you a price. Are you thinking of picking it up down here?

I will let you know soon.

Thank you for the interest,
Thomas

Steve Cole · 01-20-2015, 08:23 PM

You wouldn't happen to have a vacuum gauge in that cluster would you?

DLTruck1973 · 01-20-2015, 08:25 PM

Quote:

Originally Posted by jimer1964

I was thinking the same nice truck to be parting out!

Too late

It was a running driving truck 2 days ago. We had a customer that wanted a engine he could hear run and bought it.

DLTruck1973 · 01-20-2015, 08:27 PM

Quote:

Originally Posted by Steve Cole

You wouldn't happen to have a vacuum gauge in that cluster would you?

Sorry, no vacuum gauge in that cluster. I may have a loose one but will have to hunt for it.

Thanks for the interest,
Thomas

DLTruck1973 · 01-20-2015, 08:36 PM

Quote:

Originally Posted by cst204x4

Looks good will it include prop. Valve and small lines? Price shipped to 48817

The prop valve and small lines are not included but $35.00 additional if interested.

I can get you a total shipped to your address, if not today, tomorrow morning.

Thank you for the interest,
Thomas

*low&slow* · 01-20-2015, 08:47 PM

How much do you want for the whole truck?

**cst204x4** · 01-20-2015, 09:07 PM

Yes I would like the valve and small lines also

flashed · 01-20-2015, 09:09 PM

How much for the rubber mat in the cab and condition ?

engairuph · 01-20-2015, 09:48 PM

I need lens only, mine are faded and cracked

**PICKMUP** · 01-20-2015, 09:53 PM

Quote:

Originally Posted by DLTruck1973

Hi Frank,

We are going to look it over real close and get you a price. Are you thinking of picking it up down here?

I will let you know soon.

Thank you for the interest,
Thomas

I could pick it up there. Let's see how it checks out & price. thanks

Tdrcreyn4 · 01-20-2015, 10:08 PM

I'd be interested in the identification plate for the roof lights and switch if available

DLTruck1973 · 01-20-2015, 10:58 PM

Quote:

Originally Posted by low&slow

How much do you want for the whole truck?

The whole truck is not a whole truck any more. Are you looking for a C30 rolling chassis?

Thank you for the interest,
Thomas

*low&slow* · 01-20-2015, 11:01 PM

Quote:

Originally Posted by DLTruck1973

The whole truck is not a whole truck any more. Are you looking for a C30 rolling chassis?

Thank you for the interest,
Thomas

Complete rolling chassis and what's left in post 35. Cab, dash, doors, windows, ect.

DLTruck1973 · 01-20-2015, 11:06 PM

Quote:

Originally Posted by PICKMUP

I could pick it up there. Let's see how it checks out & price. thanks

Hi Frank,

I got a closer look with Tom at the cab and doors. The cab is not bad at all but will need rockers, a couple of cab supports and some floor repair near the pinch weld at the rockers due to rot through. Very common rot areas. It has some minor dents in the roof panel in the rear. We are going to ask $350.00 for the cab. I can get you better photos of the bad areas tomorrow if interested.

The drivers door is OK but has a speaker hole. It does have a small dent on the lower middle. $150.00 on the door, shell only.

The passenger door is not worthy to sell. It has bad inner lower panel damage as well as outer skin damage that is hard to see in the photos.

Other than mentioned, it is a very clean rust free cab.

Thank you for the interest. Are you looking specifically for a C30 cab?

Thomas

DLTruck1973 · 01-20-2015, 11:09 PM

Quote:

Originally Posted by low&slow

Complete rolling chassis and what's left in post 35. Cab, dash, doors, windows, ect.

Let me see what I can figure up. I will let you know tomorrow. Would you plan to pick up or arrange delivery?

Thank you for the interest,

Thomas

67swb72klb · 01-20-2015, 11:16 PM

I will pass on the handles thanks

*low&slow* · 01-20-2015, 11:34 PM

Quote:

Originally Posted by DLTruck1973

Let me see what I can figure up. I will let you know tomorrow. Would you plan to pick up or arrange delivery?

Thank you for the interest,

Thomas

I may be able to pick it up. Is the flat bed still on it?

DLTruck1973 · 01-21-2015, 01:07 PM

Quote:

Originally Posted by low&slow

I may be able to pick it up. Is the flat bed still on it?

Here are some photos as it sits. The price is $1,400.00 and does not include any pieces that have been removed as of now.

The drivers door is empty.

Let me know. I have people waiting to finish the disassembly on this and need to know if you are interest. I also have people waiting on parts still on the truck

Thank you for the interest,
Thomas

01-20-2015, 06:48 PM	#29
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,122	Re: Parting 1972 C30 350/TH400 How much for the cab? with doors? condition? thanks, frank __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-20-2015, 07:20 PM	#30
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: Parting 1972 C30 350/TH400 Will pass on the emblem. thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2015, 08:20 PM	#32
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting 1972 C30 350/TH400 Looks good will it include prop. Valve and small lines? Price shipped to 48817 __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

01-20-2015, 08:23 PM	#34
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,623	Re: Parting 1972 C30 350/TH400 You wouldn't happen to have a vacuum gauge in that cluster would you?

01-20-2015, 08:47 PM	#38
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Parting 1972 C30 350/TH400 How much do you want for the whole truck?

01-20-2015, 09:07 PM	#39
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 1,999	Re: Parting 1972 C30 350/TH400 Yes I would like the valve and small lines also __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles Last edited by cst204x4; 01-21-2015 at 07:43 AM.

01-20-2015, 09:09 PM	#40
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Parting 1972 C30 350/TH400 How much for the rubber mat in the cab and condition ?

01-20-2015, 09:48 PM	#41
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting 1972 C30 350/TH400 I need lens only, mine are faded and cracked __________________ Ralph L. Jasper 69 4x4 Suburban PTO winch(NAVY) 13 GMC Ext cab 12 Ford Fusion SE(wife) MAI Interior shop

01-20-2015, 10:08 PM	#43
Tdrcreyn4 Registered User Join Date: Aug 2013 Location: Atlanta, GA Posts: 702	Re: Parting 1972 C30 350/TH400 I'd be interested in the identification plate for the roof lights and switch if available

01-20-2015, 11:16 PM	#48
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,449	Re: Parting 1972 C30 350/TH400 I will pass on the handles thanks __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.