Headers to 2.5" Ramhorns - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lks dcvn** · 03-04-2009, 07:44 PM

Yes - pix and part number if you got one...

mdunn · 03-04-2009, 11:28 PM

So I just checked JC Whitney's site and they have the part number available. Says they will be available 4/4. Price is $29.99 right now!! Are these the ones you were talking about? If so, I may try a set for my 72 also. Thanks!

cleszkie · 03-05-2009, 02:31 PM

I will take some pics tonight. I saw a thread in the pickup board were a guy was using them and took a buch of good pics. I will try to find that thread and link it.

I don't have a GM part number for the shields. But I can tell you that I bought them through the Orange County Truck Shop located in Orange, CA. Their number is (714) 771-7871. I think LMC aslo carries the plug shields.

fun in dirt · 03-05-2009, 04:05 PM

Quote:

Originally Posted by Critter

So which side DOESN'T have the tube??? So I will know which to order next time I need some.

So is 2 right sides what i want?

"lks dcvn" said part #674503 which is the right side and "jaros44sr" pic looks like he's taping out the left side.

**jaros44sr** · 03-05-2009, 04:17 PM

Quote:

Originally Posted by fun in dirt

So is 2 right sides what i want?

"lks dcvn" said part #674503 which is the right side and "jaros44sr" pic looks like he's taping out the left side.

Mine is also a right side, just turned around to fit on the left side

Mike C · 03-05-2009, 08:05 PM

Someday I'll need 'em for my 'vette. At $29 each, I placed my order. What a deal if they acutally fulfill it.

smbrouss70 · 03-06-2009, 10:34 AM

FYI, JC Whitney said the same shipment date for me, but after I ordered, it told me that they were no longer available. I called and spoke to someone about it and they told me that it looked like they were not able to get them anymore. So I shopped around and found them on Amazon for $51/ea. Also JC Whitney only listed the 674503 which is the right side which I "believe" is the one with the heat tube in it. Amazon has both so I ordered a set of the 674504's.

fun in dirt · 03-06-2009, 10:39 AM

I ordered a set yesterday too. I called JC Whitney but the guy acted like he really doubted they would get anymore in

So I ended up ordering a set from Speedway, $60 each. Yes that's double the $, but still $20ea cheaper than other places I found them.
Funny how when I woke up yesterday I wasn't even thinking about new exhaust, but after reading this thread wouldn't nothing else do

fun in dirt · 03-06-2009, 10:45 AM

Quote:

Originally Posted by smbrouss70

FYI, JC Whitney said the same shipment date for me, but after I ordered, it told me that they were no longer available. I called and spoke to someone about it and they told me that it looked like they were not able to get them anymore. So I shopped around and found them on Amazon for $51/ea. Also JC Whitney only listed the 674503 which is the right side which I "believe" is the one with the heat tube in it. Amazon has both so I ordered a set of the 674504's.

I ordered the ....03s. I thought it was the right side that didn't have the tubes

WHICH ONES

smbrouss70 · 03-06-2009, 10:51 AM

According to a post by PICKMUP when he was selling the kits, the RH side does have the tubes. I'm no expert, just going off of what I've read. One thing is for sure, one of the 2 of us will have tubes.

http://67-72chevytrucks.com/vboard/s...6&postcount=62

smbrouss70 · 03-06-2009, 10:54 AM

I will PM PICKMUP and ask. Maybe one of us can change our order depending on the answer.

coast2coast · 03-08-2009, 01:07 AM

Quote:

Originally Posted by fun in dirt

I ordered a set yesterday too. I called JC Whitney but the guy acted like he really doubted they would get anymore in

So I ended up ordering a set from Speedway, $60 each. Yes that's double the $, but still $20ea cheaper than other places I found them.
Funny how when I woke up yesterday I wasn't even thinking about new exhaust, but after reading this thread wouldn't nothing else do

Do you have the part number for the set you ordered from speedway?

texanidiot25 · 03-08-2009, 01:34 AM

http://www.speedwaymotors.com/SandB-...olds,3823.html

http://www.speedwaymotors.com/UNPOLI...OLDS,5425.html ?

Only leak I have is at the collector, but need to get some good gaskets before I complain too much. No problems a the heads though.

LT1 had excellent plug wire boot shields, can be had for like 6 bucks a piece or something like that.

badpeanut · 03-08-2009, 04:02 AM

Subscribed!

coast2coast · 03-08-2009, 09:43 AM

Texanidiot25, those were the parts I found at Speedway, also. They are some good looking ramshorns, but pricey. Is that what you are running?

Fun in Dirt said he ordered some in the $60 each range, and I couldn't find them.

**rockc** · 03-08-2009, 10:57 AM

Just finished modifying my 2 1/2" ramhorns. Took the tube out and tapped the hole, then screwed bolts in both top and bottom holes and grinded them off flush with manifold. Both of mine came with the accessory flang so I had to grind that off too. The cost of these was a little over $216.00 at my local auto parts for the both of them. These were made in china. (Limited Lifetime*)The parts numbers for mine were 674-503 and 674-500. They came with the exhaust bolts and nuts. But went ahead and purchased the brass nuts.

fun in dirt · 03-08-2009, 11:23 AM

When I went back there & did a search "exhaust manifold" for them this morning I could not find them either; only the same ones Texanidiot25 referenced.
But they already sent me a shipped confirmation Friday. The ones I ordered from Speedway were part #9300327-R (still not clear on whether I should have ordered lefts instead). I punched that # in & they still show them http://www.speedwaymotors.com/2-1and...olds,9133.html
My total shipped & all was $140.25!

texanidiot25 · 03-08-2009, 11:59 AM

Quote:

Originally Posted by coast2coast

Texanidiot25, those were the parts I found at Speedway, also. They are some good looking ramshorns, but pricey. Is that what you are running?

Just regular cheap-o headers, when I bought my truck it was already set up for headers. (Had no motor/trans)

**jaros44sr** · 03-08-2009, 01:26 PM

Quote:

Originally Posted by fun in dirt

When I went back there & did a search "exhaust manifold" for them this morning I could not find them either; only the same ones Texanidiot25 referenced.
But they already sent me a shipped confirmation Friday. The ones I ordered from Speedway were part #9300327-R (still not clear on whether I should have ordered lefts instead). I punched that # in & they still show them http://www.speedwaymotors.com/2-1and...olds,9133.html
My total shipped & all was $140.25!

Post up, when you get your order in

70rs/ss · 03-09-2009, 05:27 PM

I placed an order through JC Whitney, they let it go through, I'll see if I get them?? I would've thought I would have been rejected at the online order phase if they were out of stock?? I'll see, if not then i haul the part number to the local parts place and see if they'll "price match" the online JC Whitney price??

smbrouss70 · 03-09-2009, 07:41 PM

Quote:

Originally Posted by 70rs/ss

I placed an order through JC Whitney, they let it go through, I'll see if I get them?? I would've thought I would have been rejected at the online order phase if they were out of stock?? I'll see, if not then i haul the part number to the local parts place and see if they'll "price match" the online JC Whitney price??

If they let mine go through, my wife may be pissed at me. I'll have 2 sets being delivered.

fun in dirt · 03-10-2009, 12:05 PM

My set came in from Speedway yesterday. And now I know that it's not the right side that you need to order, get the lefts. But oh well, they look good & it won't be too bad taking the heat risers out... I hope!
Maybe I'll work on getting the brackets & casting marks ground off this weekend. We have some ceramic coating stuff left in the shop from another project, so I'll probably coat them with that.

Critter · 03-10-2009, 12:32 PM

Quote:

Originally Posted by fun in dirt

My set came in from Speedway yesterday. And now I know that it's not the right side that you need to order, get the lefts.

Thanks, 2 left sides it is!

Obviously you are going to have to show us some pics once you get them coated.

smbrouss70 · 03-12-2009, 08:53 PM

Mine came in yesterday! Dorman 674504 is what you want, if you don't want the heat tubes.

gintaras · 05-08-2009, 11:39 AM

subscribed

03-04-2009, 07:44 PM	#26
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,346	Re: Headers to 2.5" Ramhorns Yes - pix and part number if you got one...

03-04-2009, 11:28 PM	#27
mdunn Registered User Join Date: Sep 2008 Location: Marysville, OH Posts: 119	Re: Headers to 2.5" Ramhorns So I just checked JC Whitney's site and they have the part number available. Says they will be available 4/4. Price is $29.99 right now!! Are these the ones you were talking about? If so, I may try a set for my 72 also. Thanks! __________________ 1972 Blazer CST 4x4

03-05-2009, 02:31 PM	#28
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Headers to 2.5" Ramhorns I will take some pics tonight. I saw a thread in the pickup board were a guy was using them and took a buch of good pics. I will try to find that thread and link it. I don't have a GM part number for the shields. But I can tell you that I bought them through the Orange County Truck Shop located in Orange, CA. Their number is (714) 771-7871. I think LMC aslo carries the plug shields.

03-05-2009, 08:05 PM	#31
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	Re: Headers to 2.5" Ramhorns Someday I'll need 'em for my 'vette. At $29 each, I placed my order. What a deal if they acutally fulfill it. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

03-06-2009, 10:34 AM	#32
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Headers to 2.5" Ramhorns FYI, JC Whitney said the same shipment date for me, but after I ordered, it told me that they were no longer available. I called and spoke to someone about it and they told me that it looked like they were not able to get them anymore. So I shopped around and found them on Amazon for $51/ea. Also JC Whitney only listed the 674503 which is the right side which I "believe" is the one with the heat tube in it. Amazon has both so I ordered a set of the 674504's. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-06-2009, 10:39 AM	#33
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,121	Re: Headers to 2.5" Ramhorns I ordered a set yesterday too. I called JC Whitney but the guy acted like he really doubted they would get anymore in So I ended up ordering a set from Speedway, $60 each. Yes that's double the $, but still $20ea cheaper than other places I found them. Funny how when I woke up yesterday I wasn't even thinking about new exhaust, but after reading this thread wouldn't nothing else do __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '01 2500 Suburban ...party wagon & tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

03-06-2009, 10:51 AM	#35
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Headers to 2.5" Ramhorns According to a post by PICKMUP when he was selling the kits, the RH side does have the tubes. I'm no expert, just going off of what I've read. One thing is for sure, one of the 2 of us will have tubes. http://67-72chevytrucks.com/vboard/s...6&postcount=62 __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-06-2009, 10:54 AM	#36
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Headers to 2.5" Ramhorns I will PM PICKMUP and ask. Maybe one of us can change our order depending on the answer. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-08-2009, 01:34 AM	#38
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Headers to 2.5" Ramhorns http://www.speedwaymotors.com/SandB-...olds,3823.html http://www.speedwaymotors.com/UNPOLI...OLDS,5425.html ? Only leak I have is at the collector, but need to get some good gaskets before I complain too much. No problems a the heads though. LT1 had excellent plug wire boot shields, can be had for like 6 bucks a piece or something like that. Last edited by texanidiot25; 03-08-2009 at 01:36 AM.

03-08-2009, 04:02 AM	#39
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,756	Re: Headers to 2.5" Ramhorns Subscribed! __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

03-08-2009, 09:43 AM	#40
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Headers to 2.5" Ramhorns Texanidiot25, those were the parts I found at Speedway, also. They are some good looking ramshorns, but pricey. Is that what you are running? Fun in Dirt said he ordered some in the $60 each range, and I couldn't find them. Last edited by coast2coast; 03-08-2009 at 09:43 AM.

03-08-2009, 10:57 AM	#41
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Headers to 2.5" Ramhorns Just finished modifying my 2 1/2" ramhorns. Took the tube out and tapped the hole, then screwed bolts in both top and bottom holes and grinded them off flush with manifold. Both of mine came with the accessory flang so I had to grind that off too. The cost of these was a little over $216.00 at my local auto parts for the both of them. These were made in china. (Limited Lifetime)The parts numbers for mine were 674-503 and 674-500. They came with the exhaust bolts and nuts. But went ahead and purchased the brass nuts. __________________ 72 chevy 3/4 ton 4X4 Last edited by rockc; 03-08-2009 at 10:58 AM.*

03-08-2009, 11:23 AM	#42
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,121	Re: Headers to 2.5" Ramhorns When I went back there & did a search "exhaust manifold" for them this morning I could not find them either; only the same ones Texanidiot25 referenced. But they already sent me a shipped confirmation Friday. The ones I ordered from Speedway were part #9300327-R (still not clear on whether I should have ordered lefts instead). I punched that # in & they still show them http://www.speedwaymotors.com/2-1and...olds,9133.html My total shipped & all was $140.25! __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '01 2500 Suburban ...party wagon & tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619 Last edited by fun in dirt; 03-08-2009 at 11:26 AM.

03-09-2009, 05:27 PM	#45
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Headers to 2.5" Ramhorns I placed an order through JC Whitney, they let it go through, I'll see if I get them?? I would've thought I would have been rejected at the online order phase if they were out of stock?? I'll see, if not then i haul the part number to the local parts place and see if they'll "price match" the online JC Whitney price??

03-10-2009, 12:05 PM	#47
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,121	Re: Headers to 2.5" Ramhorns My set came in from Speedway yesterday. And now I know that it's not the right side that you need to order, get the lefts. But oh well, they look good & it won't be too bad taking the heat risers out... I hope! Maybe I'll work on getting the brackets & casting marks ground off this weekend. We have some ceramic coating stuff left in the shop from another project, so I'll probably coat them with that. Attached Images __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '01 2500 Suburban ...party wagon & tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619



Register or Log In To remove these advertisements.

03-12-2009, 08:53 PM	#49
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: Headers to 2.5" Ramhorns Mine came in yesterday! Dorman 674504 is what you want, if you don't want the heat tubes. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-08-2009, 11:39 AM	#50
gintaras Registered User Join Date: Aug 2008 Location: Schererville, IN Posts: 110	Re: Headers to 2.5" Ramhorns subscribed __________________ 2004 VW R32 450 HP money pit (faster than a Viper in the 1320 ) 2001.5 VW Passat beater 1972 Custom Deluxe Highlander 69k miles and counting, all original, even the paint

Register or Log In To remove these advertisements.