PA So 1 more 72 blazer going under the knife - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-02-2016, 10:32 PM

Quote:

Originally Posted by jimer1964

Hi, Interested in the visors can you put up some pictures when you get time? Thanks

I washed both sides the each on has some staining on one side. It may clean up with some good cleaner like spray 9 but don't know the only thing I used was comet. There is a rip on the one next to the mounting bracket.

**jimer1964** · 03-09-2016, 11:46 PM

Quote:

Originally Posted by 1rippen6

I washed both sides the each on has some staining on one side. It may clean up with some good cleaner like spray 9 but don't know the only thing I used was comet. There is a rip on the one next to the mounting bracket.

Sorry for late reply! I will take them shipped to pa 17517

**1rippen6** · 03-02-2016, 10:28 PM

Quote:

Originally Posted by Ta12sec

How's the grill surround?

Grill has dents the whole way around it.

bluek5 · 03-02-2016, 09:40 AM

How is the passenger door, inner grille?

**JMac11** · 03-02-2016, 10:09 AM

Problems with the top?? How close to Charleston WV?

**1rippen6** · 03-02-2016, 10:34 PM

Quote:

Originally Posted by bluek5

How is the passenger door, inner grille?

Pictures of the cracks

**Beau2a** · 03-02-2016, 10:21 AM

Do you have the cam and return spring from the hatch handle? Zip is 98116

**1rippen6** · 03-02-2016, 10:42 AM

Quote:

Originally Posted by jimer1964

Hi, Interested in the visors can you put up some pictures when you get time? Thanks

Will get some pictures tonight

Quote:

Originally Posted by bluek5

How is the passenger door, inner grille?

PS door is junk inner grill has at least one crack

Quote:

Originally Posted by JMac11

Problems with the top?? How close to Charleston WV?

I'm about 4.5 hours for Charleston looks like 300 miles exactly I'm in Greencastle PA if you want to check it out.

Quote:

Originally Posted by Beau2a

Do you have the cam and return spring from the hatch handle? Zip is 98116

I have someone interested in the top and another interested in just the hatch will let you know how that goes.

**Beau2a** · 03-02-2016, 10:45 AM

Thanks

**1rippen6** · 03-02-2016, 11:11 AM

Quote:

Originally Posted by Beau2a

Thanks

I just found one the spring is a little bent but should work fine will post some pictures later today

**1rippen6** · 03-02-2016, 10:35 PM

Quote:

Originally Posted by Beau2a

Do you have the cam and return spring from the hatch handle? Zip is 98116

Here you go

**Beau2a** · 03-02-2016, 11:31 PM

I'll take it.

ochre 72 · 03-02-2016, 01:41 PM

I'm interested in the fuel filler neck cover. How much would shipping be to 30114

**1rippen6** · 03-02-2016, 10:36 PM

Quote:

Originally Posted by ochre 72

I'm interested in the fuel filler neck cover. How much would shipping be to 30114

Shipping is 14 let me know if still interested.

ochre 72 · 03-03-2016, 03:57 PM

Quote:

Originally Posted by 1rippen6

Shipping is 14 let me know if still interested.

Thanks. I'll take. Will send $ to your PayPal. Thanks, David

ochre 72 · 03-10-2016, 06:46 PM

Quote:

Originally Posted by ochre 72

Thanks. I'll take. Will send $ to your PayPal. Thanks, David

Received the filler neck cover. Looks great. Thanks for the good communication and quick shipping!

**1rippen6** · 03-16-2016, 07:34 AM

Quote:

Originally Posted by ochre 72

Received the filler neck cover. Looks great. Thanks for the good communication and quick shipping!

Awesome good to hear thanks

**dutchmanz** · 03-02-2016, 01:44 PM

looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing...

Heliarcn · 03-02-2016, 02:15 PM

Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

**29od1** · 03-02-2016, 02:45 PM

How much for the bucket seat cross brace shipped to 67210?
Thanks,
David

**1rippen6** · 03-02-2016, 10:40 PM

Quote:

Originally Posted by Heliarcn

Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

The 2 females have bad staining as you can see the 2 retractables are decent but the cover on the long one is bad. The one female buckle is broken if still interested make me an offer on the belts. Door panels are very chalky DS no extra holes PS plenty of extra holes if interested will be very cheap.

Heliarcn · 03-03-2016, 12:53 AM

Quote:

Originally Posted by 1rippen6

The 2 females have bad staining as you can see the 2 retractables are decent but the cover on the long one is bad. The one female buckle is broken if still interested make me an offer on the belts. Door panels are very chalky DS no extra holes PS plenty of extra holes if interested will be very cheap.

I'll pass on the seatbelts and door panels. Thanks for the pics.

Ridnhi · 03-02-2016, 03:31 PM

How is the inside of the tailgate? I need a gate to repair mine.

**1rippen6** · 03-02-2016, 03:41 PM

Quote:

Originally Posted by ochre 72

I'm interested in the fuel filler neck cover. How much would shipping be to 30114

Will get you a quote this evening

Quote:

Originally Posted by dutchmanz

looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing...

I have 2 decent tops setting in the yard 250 without a hatch I don't have any decent hatches

Quote:

Originally Posted by Heliarcn

Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.

Will get you pictures tonight none of it is good shape

Quote:

Originally Posted by 29od1

How much for the bucket seat cross brace shipped to 67210?
Thanks,
David

Sorry David wish I had 100 of them promised this one back to the guy I bought the blazer off of

Quote:

Originally Posted by Ridnhi

How is the inside of the tailgate? I need a gate to repair mine.

Will get you pictures tonight but I know the bottom is gone if that is what you are looking for

**k5blazin** · 03-02-2016, 08:01 PM

Interested in the fan shroud if it's not damaged!

03-02-2016, 09:40 AM	#4
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: So 1 more 72 blazer going under the knife How is the passenger door, inner grille?

03-02-2016, 10:09 AM	#5
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: So 1 more 72 blazer going under the knife Problems with the top?? How close to Charleston WV?

03-02-2016, 10:21 AM	#7
Beau2a Senior Member Join Date: Jan 2016 Location: Enumclaw WA Posts: 267	Re: So 1 more 72 blazer going under the knife Do you have the cam and return spring from the hatch handle? Zip is 98116

03-02-2016, 10:45 AM	#9
Beau2a Senior Member Join Date: Jan 2016 Location: Enumclaw WA Posts: 267	Re: So 1 more 72 blazer going under the knife Thanks

03-02-2016, 11:31 PM	#12
Beau2a Senior Member Join Date: Jan 2016 Location: Enumclaw WA Posts: 267	Re: So 1 more 72 blazer going under the knife I'll take it.

03-02-2016, 01:41 PM	#13
ochre 72 Registered User Join Date: Feb 2016 Location: Woodstock, Ga. Posts: 183	Re: So 1 more 72 blazer going under the knife I'm interested in the fuel filler neck cover. How much would shipping be to 30114

03-02-2016, 01:44 PM	#18
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: So 1 more 72 blazer going under the knife looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing... __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

03-02-2016, 02:15 PM	#19
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: So 1 more 72 blazer going under the knife Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures. __________________ Bret 1972 Chevy Suburban 1976 Blazer

03-02-2016, 02:45 PM	#20
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: So 1 more 72 blazer going under the knife How much for the bucket seat cross brace shipped to 67210? Thanks, David

03-02-2016, 03:31 PM	#23
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: So 1 more 72 blazer going under the knife How is the inside of the tailgate? I need a gate to repair mine. __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

03-02-2016, 08:01 PM	#25
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: So 1 more 72 blazer going under the knife Interested in the fan shroud if it's not damaged!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.