Parting a 67 no rust AZ - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bugly · 03-12-2009, 10:12 PM

Interested in windshield and front clip shipping to 30039 how much I have cash?

**t korinek** · 03-12-2009, 11:34 PM

bugly, windshield cracked, not shipping the clip at this time

I'll let you guys know if I part the doors

my67chevytruck, yes its for an auto, air. Keys are all matched original keys & bezel & parts are there $40 for all of it.

New sill plates, installed & just dirty. $25

Rob, if I still have the clip, I'll be surprised. But if you get the chance come by anyway. BTW did you get the bracket?

Mike, I'll get you some pics of the 68 clip, but you looked at it the last time you were here.

Trying to leave the trim w/ the grill for now, it has a few dings in it, it would make nice driver quality stuff, but its not perfect.

MDC · 03-13-2009, 01:24 AM

Tom
There should be a 'clamp' that bolts to the ebrake lever plate that holds the ebrake cable housing to the lever assy. If you have that part, I need it. Would also like to get in line for the grill loops
Thanks
Mike

**t korinek** · 03-13-2009, 01:30 AM

mdc, i'll check on that piece & put you in line for the loops.
tom

70rs/ss · 03-13-2009, 01:54 AM

Tom I may just take the 67 clip and sell the 72 clip once I get a hold of it, I am leaving for Cali tomorrow afternoon, and I'll be back in a few days, I may come through PHX, but probably not till I come back for the week of 3/30-4/3. If you have it still I'll more than likely buy it then.

**t korinek** · 03-13-2009, 03:35 AM

OK mike,
Heres some more pics for hotfun, The po has taken a lot of stuff off the cab already, no ac inside or out except controller, not much in the engine bay either, & I think it should be a high hump cab, stated earlier it was a low hump, I'll have to double check.
Tom

vasquezmrysvll · 03-13-2009, 09:24 PM

price on the radiator shipped to 95901? thanks

nds1968 · 03-13-2009, 10:19 PM

I'll pass on the bezel, any seatbelts.

**t korinek** · 03-14-2009, 01:02 AM

vasquezmrysvll, radiator condition is unknown, I'd sell it as a core only. it is a 4 core
nds68, I'll see what it has for belts. What color do you need?

Also have stepside floor cross braces including front & back, I think its missing 1 or 2 of the middle ones $$60 for all
Step side step braces $15 or included if you buy the floor braces
stepside tail light brackets $20 for both
2 pieces of trim good driver quality $15 each or both for $20
Front bumper brackets 67 & 68 $25 in nice shape.
8000 RPM tach $25
All + shipping
Thanks,
Tom

vasquezmrysvll · 03-14-2009, 09:08 AM

ok, how much for the core.

nds1968 · 03-14-2009, 09:27 AM

I need blue seat belts.

**HOTFUN** · 03-14-2009, 07:23 PM

Tom

Looks like my coworker friend will have another empty 28' enclosed trailer going from Phoenix back to Grand Island, Nebraska in about 2 weeks. He is interested in finding a easy haul if it can be picked up or dropped off in route or near Grand Island. He has a brand new trailer so he doesnt want anything that has to be slid on the wood floor/ ramp door or leaks. Keep that in mind and he also will have other trips back this way in the future after he moves down there next month. Mark

**t korinek** · 03-17-2009, 01:41 AM

Mark, I'll have to see what we can put together, its a shame to have an empty trailer going back & forth without good parts in it! I have core supports & doors, trailing arms, etc.that could load easily, Do you have a wish list I should be trying to fill?

Heres some more pics of the cab & engine parts
nds68 still checking on your blu seatbelts

**HOTFUN** · 03-17-2009, 02:22 AM

Tom, I gave my buddy Blake your name and phone number and he is going to call you and me when he makes another trip. Right now he is moving down there the 26th and will will hopefully be making another trip within a month back up here. So we'll be talking.
Thanks, Mark

deweychop · 03-18-2009, 07:24 AM

Me again. Could you give me a price for that steering column with all the linkage to the tranny. Thanks!

deweychop · 03-18-2009, 07:26 AM

Sorry...... with shipping to 34116

STOCKISH · 03-18-2009, 09:22 AM

Ok, could you give me alot of detailed pics of the cab? Looking for pics of areas around fresh air ducts inside and out, inner rockers and insides of cab corners please. Any previous body work at all? Will you sell me just the cab and for how much? Is this absolutely rust free for sure? Thanks again.

*FormerMember* · 03-18-2009, 09:47 AM

Checking to see if I can get a truck there for the cab and doors. I could also use another 68 front clip. Might want to hold off in shipping the high hump...

BTW, I messed up with Paypal... it did an e-check for that high hump. They pulled the funds from my checking account, so we're good to go.

*FormerMember* · 03-18-2009, 10:20 AM

Ok, looks like I can get a truck there to get the 68 clip and the cab. Where do I stand in line?

Edit: Also, what's included with the cab?

**CPNE** · 03-18-2009, 12:02 PM

IF the cab makes it to Grendel and IF he can get his transport there and IF there is room put me in line for that bed. Don't need tailgate but if you have a thrashed (bowed, beat, dented) tailgate you are junking I'll take it.

**t korinek** · 03-18-2009, 11:31 PM

Deweychop $85 shipped for the auto column & linkage.

1972SuperCheyenne, I'll post more pics of the cab, I cant guarantee that there's never been any bodywork done on it without getting it sand blasted, rockers & cab corners are original.
There is rust scale under the chrome sill plates, its not rusted through, there is rust scale at the lower kick panels, not rusted through. This is as rust free as I ever see, but not completely rust free. It still has the original tar paper, sound deadner on the floor. I'll sell the cab alone for $625 I'll give you until this time friday to decide if you want it.

There are a lot of minnesotans, michigans & canadian people here buying stuff to take back & I'll put this stuff on hold till you guys figure out if you want it, but I don't want to miss the window of opportunity as they will be going home soon, hope you understand about the time frame.

grendel your next in line on the cab & doors if 72Super passes. The front clip sold locally on Monday. The cab is pretty much bare now, the PO had taken a lot off it, Passenger door is complete, with latches & glass & wings, driver side is missing regulator & inside door latch hardware. windshield & rear glass still in it . This is a low hump cab. I have the hump boxed & will wait for your ok to ship, if we dont ship I owe you $15

CPNE I'll throw in a tailgate if this works out & could also send your other front end parts with it also.

**t korinek** · 03-18-2009, 11:35 PM

more pics

**t korinek** · 03-18-2009, 11:38 PM

more cab pics

**t korinek** · 03-18-2009, 11:43 PM

The last of the cab pics, I don't have any of the area around the sill vents, will get them tomorrow.

nds68 I have blue belts, I'll get pics

*FormerMember* · 03-19-2009, 08:39 AM

I'll pass on the cab then. I don't want to deal with rust at all.

03-12-2009, 10:12 PM	#26
bugly Registered User Join Date: Feb 2009 Location: Atlanta Posts: 11	Re: Parting a 67 no rust AZ Interested in windshield and front clip shipping to 30039 how much I have cash?

03-12-2009, 11:34 PM	#27
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ bugly, windshield cracked, not shipping the clip at this time I'll let you guys know if I part the doors my67chevytruck, yes its for an auto, air. Keys are all matched original keys & bezel & parts are there $40 for all of it. New sill plates, installed & just dirty. $25 Rob, if I still have the clip, I'll be surprised. But if you get the chance come by anyway. BTW did you get the bracket? Mike, I'll get you some pics of the 68 clip, but you looked at it the last time you were here. Trying to leave the trim w/ the grill for now, it has a few dings in it, it would make nice driver quality stuff, but its not perfect. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 03-13-2009 at 01:31 AM. Reason: More info

03-13-2009, 01:24 AM	#28
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: Parting a 67 no rust AZ Tom There should be a 'clamp' that bolts to the ebrake lever plate that holds the ebrake cable housing to the lever assy. If you have that part, I need it. Would also like to get in line for the grill loops Thanks Mike __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape Last edited by MDC; 03-13-2009 at 01:26 AM.

03-13-2009, 01:30 AM	#29
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ mdc, i'll check on that piece & put you in line for the loops. tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-13-2009, 01:54 AM	#30
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Parting a 67 no rust AZ Tom I may just take the 67 clip and sell the 72 clip once I get a hold of it, I am leaving for Cali tomorrow afternoon, and I'll be back in a few days, I may come through PHX, but probably not till I come back for the week of 3/30-4/3. If you have it still I'll more than likely buy it then.

03-13-2009, 03:35 AM	#31
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ OK mike, Heres some more pics for hotfun, The po has taken a lot of stuff off the cab already, no ac inside or out except controller, not much in the engine bay either, & I think it should be a high hump cab, stated earlier it was a low hump, I'll have to double check. Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 03-13-2009 at 03:37 AM. Reason: more info

03-13-2009, 09:24 PM	#32
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting a 67 no rust AZ price on the radiator shipped to 95901? thanks __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-13-2009, 10:19 PM	#33
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Parting a 67 no rust AZ I'll pass on the bezel, any seatbelts. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-14-2009, 01:02 AM	#34
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ vasquezmrysvll, radiator condition is unknown, I'd sell it as a core only. it is a 4 core nds68, I'll see what it has for belts. What color do you need? Also have stepside floor cross braces including front & back, I think its missing 1 or 2 of the middle ones $$60 for all Step side step braces $15 or included if you buy the floor braces stepside tail light brackets $20 for both 2 pieces of trim good driver quality $15 each or both for $20 Front bumper brackets 67 & 68 $25 in nice shape. 8000 RPM tach $25 All + shipping Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-14-2009, 09:08 AM	#35
vasquezmrysvll "the other guy" Join Date: Oct 2008 Location: Olivehurst California 95961 Posts: 901	Re: Parting a 67 no rust AZ ok, how much for the core. __________________ God Said,"Building A 10 Second Import Is Like Coming Out Of The Closet, In The End Ur Still....."EXPLETIVE"

03-14-2009, 09:27 AM	#36
nds1968 Registered User Join Date: Mar 2006 Location: Pittsburgh Posts: 1,694	Re: Parting a 67 no rust AZ I need blue seat belts. __________________ Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers

03-14-2009, 07:23 PM	#37
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,142	Re: Parting a 67 no rust AZ Tom Looks like my coworker friend will have another empty 28' enclosed trailer going from Phoenix back to Grand Island, Nebraska in about 2 weeks. He is interested in finding a easy haul if it can be picked up or dropped off in route or near Grand Island. He has a brand new trailer so he doesnt want anything that has to be slid on the wood floor/ ramp door or leaks. Keep that in mind and he also will have other trips back this way in the future after he moves down there next month. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

03-17-2009, 01:41 AM	#38
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ Mark, I'll have to see what we can put together, its a shame to have an empty trailer going back & forth without good parts in it! I have core supports & doors, trailing arms, etc.that could load easily, Do you have a wish list I should be trying to fill? Heres some more pics of the cab & engine parts nds68 still checking on your blu seatbelts Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-17-2009, 02:22 AM	#39
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,142	Re: Parting a 67 no rust AZ Tom, I gave my buddy Blake your name and phone number and he is going to call you and me when he makes another trip. Right now he is moving down there the 26th and will will hopefully be making another trip within a month back up here. So we'll be talking. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

03-18-2009, 07:24 AM	#40
deweychop Registered User Join Date: Aug 2008 Location: Naples FL Posts: 77	Re: Parting a 67 no rust AZ Me again. Could you give me a price for that steering column with all the linkage to the tranny. Thanks! __________________ Horsepower sells cars Torque wins races



Register or Log In To remove these advertisements.

03-18-2009, 07:26 AM	#41
deweychop Registered User Join Date: Aug 2008 Location: Naples FL Posts: 77	Re: Parting a 67 no rust AZ Sorry...... with shipping to 34116 __________________ Horsepower sells cars Torque wins races

03-18-2009, 09:22 AM	#42
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Parting a 67 no rust AZ Ok, could you give me alot of detailed pics of the cab? Looking for pics of areas around fresh air ducts inside and out, inner rockers and insides of cab corners please. Any previous body work at all? Will you sell me just the cab and for how much? Is this absolutely rust free for sure? Thanks again. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 03-18-2009 at 09:23 AM.

03-18-2009, 09:47 AM	#43
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting a 67 no rust AZ Checking to see if I can get a truck there for the cab and doors. I could also use another 68 front clip. Might want to hold off in shipping the high hump... BTW, I messed up with Paypal... it did an e-check for that high hump. They pulled the funds from my checking account, so we're good to go. Last edited by FormerMember; 03-18-2009 at 09:48 AM.

03-18-2009, 10:20 AM	#44
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting a 67 no rust AZ Ok, looks like I can get a truck there to get the 68 clip and the cab. Where do I stand in line? Edit: Also, what's included with the cab? Last edited by FormerMember; 03-18-2009 at 10:21 AM.

03-18-2009, 12:02 PM	#45
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: Parting a 67 no rust AZ IF the cab makes it to Grendel and IF he can get his transport there and IF there is room put me in line for that bed. Don't need tailgate but if you have a thrashed (bowed, beat, dented) tailgate you are junking I'll take it. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-18-2009, 11:31 PM	#46
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ Deweychop $85 shipped for the auto column & linkage. 1972SuperCheyenne, I'll post more pics of the cab, I cant guarantee that there's never been any bodywork done on it without getting it sand blasted, rockers & cab corners are original. There is rust scale under the chrome sill plates, its not rusted through, there is rust scale at the lower kick panels, not rusted through. This is as rust free as I ever see, but not completely rust free. It still has the original tar paper, sound deadner on the floor. I'll sell the cab alone for $625 I'll give you until this time friday to decide if you want it. There are a lot of minnesotans, michigans & canadian people here buying stuff to take back & I'll put this stuff on hold till you guys figure out if you want it, but I don't want to miss the window of opportunity as they will be going home soon, hope you understand about the time frame. grendel your next in line on the cab & doors if 72Super passes. The front clip sold locally on Monday. The cab is pretty much bare now, the PO had taken a lot off it, Passenger door is complete, with latches & glass & wings, driver side is missing regulator & inside door latch hardware. windshield & rear glass still in it . This is a low hump cab. I have the hump boxed & will wait for your ok to ship, if we dont ship I owe you $15 CPNE I'll throw in a tailgate if this works out & could also send your other front end parts with it also. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:35 PM	#47
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ more pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:38 PM	#48
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ more cab pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-18-2009, 11:43 PM	#49
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: Parting a 67 no rust AZ The last of the cab pics, I don't have any of the area around the sill vents, will get them tomorrow. nds68 I have blue belts, I'll get pics Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

03-19-2009, 08:39 AM	#50
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Parting a 67 no rust AZ I'll pass on the cab then. I don't want to deal with rust at all.

Register or Log In To remove these advertisements.