GA 72 big block truck parting out - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DDassow01 · 03-08-2021, 10:43 PM

Looks good. I will take the mirrors.

**DeadheadNM** · 03-08-2021, 10:51 PM

Quote:

Originally Posted by heehawracing

you want the two lines that go through the floor and not the vent line correct

Just the rubber grommets for the lines, not the lines themselves. And the bolts etc that secure the gas tank in place inside the cab, and the pads the tank rests upon please.

**heehawracing** · 03-08-2021, 11:23 PM

Quote:

Originally Posted by DDassow01

Looks good. I will take the mirrors.

My paypal is heehawracing@bellsouth.net
Thanks

**heehawracing** · 03-08-2021, 11:24 PM

Quote:

Originally Posted by xabichin67

I'll Take the caps. PM me on payment method

My paypal is heehawracing@bellsouth.net
Thanks

**70STOVEBOLT** · 03-08-2021, 11:30 PM

Quote:

Originally Posted by heehawracing

good driver condition 30.00 shipped

Can I get some pics?

**heehawracing** · 03-08-2021, 11:44 PM

Quote:

Originally Posted by 70STOVEBOLT

Can I get some pics?

I’ll take some in the morning

**heehawracing** · 03-08-2021, 11:46 PM

Quote:

Originally Posted by DeadheadNM

Just the rubber grommets for the lines, not the lines themselves. And the bolts etc that secure the gas tank in place inside the cab, and the pads the tank rests upon please.

Ok I’m see if there good tomorrow

FL71C10 · 03-09-2021, 12:02 AM

How much for the 15x8 wheels?

**heehawracing** · 03-09-2021, 12:11 AM

Quote:

Originally Posted by FL71C10

How much for the 15x8 wheels?

There aftermarket 15x7

un4gvn! · 03-09-2021, 03:17 AM

Are the defrost vents on top of dash saddle in color and are they in good shape? If so, I'll take them.

FL71C10 · 03-09-2021, 07:39 AM

Quote:

Originally Posted by heehawracing

There aftermarket 15x7

OK, thanks

**70shortfleet** · 03-09-2021, 11:16 AM

How much for the motor mounts?

**heehawracing** · 03-09-2021, 11:41 AM

Quote:

Originally Posted by 70shortfleet

How much for the motor mounts?

175.00 shipped for the frame engine mounts i dont have the claim shells

**70shortfleet** · 03-09-2021, 12:39 PM

Quote:

Originally Posted by heehawracing

175.00 shipped for the frame engine mounts i dont have the claim shells

I am going to pass on the mounts thanks

**C101972** · 03-09-2021, 01:34 PM

Quote:

Originally Posted by 70shortfleet

I am going to pass on the mounts thanks

Would you take $150 for the complete motor mounts? Thanks Chuck
Posted via Mobile Device

**heehawracing** · 03-09-2021, 01:47 PM

Quote:

Originally Posted by C101972

Would you take $150 for the complete motor mounts? Thanks Chuck
Posted via Mobile Device

i dont have the clam shells that bolt to the engine i have the parts that go on the frame is that what you are looking for

**heehawracing** · 03-09-2021, 01:49 PM

Quote:

Originally Posted by heehawracing

i dont have the clam shells that bolt to the engine i have the parts that go on the frame is that what you are looking for

there in the 3rd picture i posted

**71CHEVYSHORTBED402** · 03-09-2021, 01:58 PM

Few things I may interested in, if available:

A. Fire arrester and hose
B. Engine bay wire clips, including those on the valve cover
C. A/C system clips.
D. S duct if nice.
E. Can be talked into a box of hardware.

Thanks

**C101972** · 03-09-2021, 02:00 PM

Quote:

Originally Posted by heehawracing

there in the 3rd picture i posted

I am interested in the plates that bolt to the frame and the mounts itself. Thanks Chuck
Posted via Mobile Device

**DeadheadNM** · 03-09-2021, 02:04 PM

Quote:

Originally Posted by heehawracing

Ok I’m see if there good tomorrow

Sounds good thanks. Basically after what all is needed to bolt a tank to the cab just like GM did.

**heehawracing** · 03-09-2021, 02:22 PM

Quote:

Originally Posted by C101972

I am interested in the plates that bolt to the frame and the mounts itself. Thanks Chuck
Posted via Mobile Device

ok what i have pictured in the 3rd picture ill do 150.00 shipped

**Tmend** · 03-09-2021, 02:24 PM

I’d be interested in both ac side vent assemblies sir if available and better photos. I have an ochre dash I want to add ac too. Thanks much
Name: 5E604606-13A6-4D37-B638-876F13A568AC.jpg
Views: 149
Size: 92.9 KB

Name: 5E604606-13A6-4D37-B638-876F13A568AC.jpg
Views: 149
Size: 92.9 KB

**heehawracing** · 03-09-2021, 02:27 PM

Quote:

Originally Posted by Tmend

I’d be interested in both ac side vent assemblies sir if available and better photos. I have an ochre dash I want to add ac too. Thanks much
Attachment 2087820

i only have one

**Tmend** · 03-09-2021, 03:13 PM

Quote:

Originally Posted by heehawracing

i only have one

Is it crack free in good working order and what would you have for it shipped to 91304. Thanks much

FL71C10 · 03-09-2021, 04:03 PM

Is that ashtray bolted in, or welded in? If it welded, I would be interested in the plastic glides on the dash mount for it.

03-08-2021, 10:43 PM	#26
DDassow01 Registered User Join Date: Dec 2019 Location: Weston, WI Posts: 26	Re: 72 big block truck parting out Looks good. I will take the mirrors.

03-09-2021, 12:02 AM	#33
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 72 big block truck parting out How much for the 15x8 wheels? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

03-09-2021, 03:17 AM	#35
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 341	Re: 72 big block truck parting out Are the defrost vents on top of dash saddle in color and are they in good shape? If so, I'll take them.

03-09-2021, 11:16 AM	#37
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: 72 big block truck parting out How much for the motor mounts?

03-09-2021, 01:58 PM	#43
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,152	Re: 72 big block truck parting out Few things I may interested in, if available: A. Fire arrester and hose B. Engine bay wire clips, including those on the valve cover C. A/C system clips. D. S duct if nice. E. Can be talked into a box of hardware. Thanks __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring the truck from ground up. With assys, the guide accts for 1000s details, OEM identifications & part numbers, written in short order. 700+ images of assm., illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025

03-09-2021, 02:24 PM	#47
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,262	Re: 72 big block truck parting out I’d be interested in both ac side vent assemblies sir if available and better photos. I have an ochre dash I want to add ac too. Thanks much __________________ Some progress is better then no progress

03-09-2021, 04:03 PM	#50
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,508	Re: 72 big block truck parting out Is that ashtray bolted in, or welded in? If it welded, I would be interested in the plastic glides on the dash mount for it. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.