20/22" steelies? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 01-26-2008, 08:15 PM

the truck is nothing but a painted chassis right now but I will bolt one on and get you all a pic this weekend... I should have known not to post without a pic!!

72BlckButy · 01-26-2008, 10:32 PM

You got that right....

Can't wait to see a pic!

NONHOG · 01-27-2008, 05:49 AM

What if ??????? you were to cut the holes out to ovals ? Would that work ?
If so it would give more of a Vette ralley look , been thinking about doing that to my Scion . Also what if your were to put some huge rivots on the wheel face to pop on a dog dish cap ? Been thinking about doing that to my truck rallys . Been thinking too much gotta start doing !

c10addict · 01-27-2008, 06:20 AM

Once the truck is together if I decide that I want to run dog dishes I am going to just weld 3 tabs on the wheel face with a small nut tacked to the backside of them and attach the dog dish with a 3 small screws through the sides of the cap.. chances are you wouldnt even notice.

jasonb72 · 01-27-2008, 10:25 AM

I have a set of 4 of the Dodge wheels, I have been trying to sell for $200, not many bites though.

slammed1 · 01-27-2008, 11:08 AM

Quote:

Originally Posted by jasonb72

I have a set of 4 of the Dodge wheels, I have been trying to sell for $200, not many bites though.

are all the tires 275/55/20?? And are all the tires in decent shape??

jasonb72 · 01-27-2008, 12:15 PM

The tires are pretty much toast.

c10addict · 02-06-2008, 10:34 AM

Sorry I have been slow getting these on here! Here is my frame with the 20" steelies! Right now tires are 275/40/20...

gringoloco · 02-06-2008, 11:26 AM

Nice!

Did you decide if you're gonna weld the holes up?

snacob14 · 02-06-2008, 11:29 AM

Jason, I''d like to buy those wheels and tires. how much shipped to 63052

c10addict · 02-06-2008, 11:36 AM

Quote:

Originally Posted by gringoloco

Nice!

Did you decide if you're gonna weld the holes up?

Probably not.... I am doing this truck as a shop truck... I am going to paint it flat olive green with a gloss black roof,interior,grill and bumpers.. Kind of a military theme... I am thinking of cutting some 4 inch holes in the front and rear bumpers and putting mesh behind them... kinda tie it all together...

Spray-Bomb · 02-06-2008, 11:40 AM

Did you re-drill or use adapters ???

That looks sweet !!!

c10addict · 02-06-2008, 11:43 AM

Quote:

Originally Posted by Spray-Bomb

Did you re-drill or use adapters ???

That looks sweet !!!

I used adapters... The put a 73-87 front crossmember in it so I had 5 lug in te front and 6 lug in the rear so I just bought the adapters I needed to make it all work...

snacob14 · 02-07-2008, 12:46 AM

did the front 73-87 five lugs match up?

c10addict · 02-07-2008, 01:02 AM

Quote:

Originally Posted by snacob14

did the front 73-87 five lugs match up?

No the dodge wheels are 5 on 5x5... Had to run adapters

tcb-1 · 02-07-2008, 02:50 AM

that is so clean looking!! what a nice choice! got me thinking now..... darn it!

72 Cheyenne402 · 02-07-2008, 06:58 AM

Quote:

Originally Posted by c10addict

I used adapters... The put a 73-87 front crossmember in it so I had 5 lug in te front and 6 lug in the rear so I just bought the adapters I needed to make it all work...

What size adaptors are you using?

c10addict · 02-07-2008, 07:14 AM

Quote:

Originally Posted by 72 Cheyenne402

What size adaptors are you using?

Fronts are 1.75" wide the rears are 2.0" wide..

72 Cheyenne402 · 02-07-2008, 07:23 AM

nice project I would have never thought of using dodge steelies. very cool

chevelle · 02-07-2008, 11:09 AM

Where can i get some of those adapters?

1LoC10 · 02-07-2008, 11:17 AM

you need some of them 20" red lines on it

chevelle · 02-08-2008, 05:20 AM

Does anyone think they would fit and not rub (too bad) on a 67 longbed with a 4 1/2 - 6 inch drop

c10addict · 02-08-2008, 05:31 AM

I have not installed any sheetmetal yet to see where they sit but from my measurements they should work fine... I bought the adapters on e-bay..

**Palf70Step** · 02-08-2008, 08:20 AM

Hmmmm. Gives me ideas, especially since i have one of them there dodge things

icesickl · 02-08-2008, 09:02 AM

I use marsh racing wheels on my rock crawler. They will do up to a 22" in a 8" 9" 10" or 11" width in any bolt patern and with almost any offset. They are your more traditional D holes.

http://www.rockcrawler-mrt.com/off%2...22%20inch.html

01-26-2008, 08:15 PM	#26
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? the truck is nothing but a painted chassis right now but I will bolt one on and get you all a pic this weekend... I should have known not to post without a pic!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

01-26-2008, 10:32 PM	#27
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 20/22" steelies? You got that right.... Can't wait to see a pic! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-27-2008, 05:49 AM	#28
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: 20/22" steelies? What if ??????? you were to cut the holes out to ovals ? Would that work ? If so it would give more of a Vette ralley look , been thinking about doing that to my Scion . Also what if your were to put some huge rivots on the wheel face to pop on a dog dish cap ? Been thinking about doing that to my truck rallys . Been thinking too much gotta start doing ! __________________ "I feel the need for speed!"... as soon as I am done with my nap. Last edited by NONHOG; 01-27-2008 at 05:49 AM.

01-27-2008, 06:20 AM	#29
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? Once the truck is together if I decide that I want to run dog dishes I am going to just weld 3 tabs on the wheel face with a small nut tacked to the backside of them and attach the dog dish with a 3 small screws through the sides of the cap.. chances are you wouldnt even notice. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

01-27-2008, 10:25 AM	#30
jasonb72 PorterBuilt Man Crush Join Date: Jul 2007 Location: Allen, tx Posts: 291	Re: 20/22" steelies? I have a set of 4 of the Dodge wheels, I have been trying to sell for $200, not many bites though. Attached Images __________________ The 72 will live again

01-27-2008, 12:15 PM	#32
jasonb72 PorterBuilt Man Crush Join Date: Jul 2007 Location: Allen, tx Posts: 291	Re: 20/22" steelies? The tires are pretty much toast. __________________ The 72 will live again

02-06-2008, 10:34 AM	#33
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? Sorry I have been slow getting these on here! Here is my frame with the 20" steelies! Right now tires are 275/40/20... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-06-2008, 11:26 AM	#34
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 20/22" steelies? Nice! Did you decide if you're gonna weld the holes up? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

02-06-2008, 11:29 AM	#35
snacob14 Registered User Join Date: Oct 2006 Location: Desoto, MO Posts: 225	Re: 20/22" steelies? Jason, I''d like to buy those wheels and tires. how much shipped to 63052

02-06-2008, 11:40 AM	#37
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: 20/22" steelies? Did you re-drill or use adapters ??? That looks sweet !!! __________________ Just not low enough... ----------------------------- Sinister Killer

02-07-2008, 12:46 AM	#39
snacob14 Registered User Join Date: Oct 2006 Location: Desoto, MO Posts: 225	Re: 20/22" steelies? did the front 73-87 five lugs match up?

02-07-2008, 02:50 AM	#41
tcb-1 Nothing to see here..... Join Date: Jun 2007 Location: Shawnee, KS Posts: 4,625	Re: 20/22" steelies? that is so clean looking!! what a nice choice! got me thinking now..... darn it! __________________ Doug THANK YOU to our American Soldiers & Veterans - POW MIA "You will NEVER be forgotten". The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. Thomas Jefferson

02-07-2008, 07:23 AM	#44
72 Cheyenne402 Registered User Join Date: Feb 2005 Location: Texas Posts: 581	Re: 20/22" steelies? nice project I would have never thought of using dodge steelies. very cool __________________ 1972 Cheyenne 402 LWB 2005 Silverado X-Cab 5.3L 2004 John Deere L120 20HP B&S

02-07-2008, 11:09 AM	#45
chevelle instagram "footbraker67" Join Date: Apr 2007 Location: Mustang,Oklahoma Posts: 204	Re: 20/22" steelies? Where can i get some of those adapters?

02-07-2008, 11:17 AM	#46
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: 20/22" steelies? you need some of them 20" red lines on it __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

02-08-2008, 05:20 AM	#47
chevelle instagram "footbraker67" Join Date: Apr 2007 Location: Mustang,Oklahoma Posts: 204	Re: 20/22" steelies? Does anyone think they would fit and not rub (too bad) on a 67 longbed with a 4 1/2 - 6 inch drop

02-08-2008, 05:31 AM	#48
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 20/22" steelies? I have not installed any sheetmetal yet to see where they sit but from my measurements they should work fine... I bought the adapters on e-bay.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-08-2008, 08:20 AM	#49
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,725	Re: 20/22" steelies? Hmmmm. Gives me ideas, especially since i have one of them there dodge things __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-08-2008, 09:02 AM	#50
icesickl Registered User Join Date: Nov 2007 Location: clive, iowa Posts: 19	Re: 20/22" steelies? I use marsh racing wheels on my rock crawler. They will do up to a 22" in a 8" 9" 10" or 11" width in any bolt patern and with almost any offset. They are your more traditional D holes. http://www.rockcrawler-mrt.com/off%2...22%20inch.html __________________ Drop it like its hot

Register or Log In To remove these advertisements.