Hello to everyone. I'm new here. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman · 10-29-2002, 11:43 AM

Welcome From Virginia

Pont · 10-29-2002, 06:25 PM

Terry'sToy

email your pic to me and I'll resize it for you. It will be later tonight when I get home but I will do it as soon as I walk in the door.

pont1@rvi.net

Terry'sToy · 10-29-2002, 06:58 PM

Awesome. It's on its way. I have lots of pics, plus I would like to post some pics of the TBI setup for those that have asked, so If you could tell me how to do this I would appreciate it.
Thank you.
Terry.

Terry'sToy · 10-29-2002, 07:11 PM

Pont. Man that is a nice truck. wanna sell it. Just kidding. Send me a pic of it also if you like.
I also can't believe all the beautiful trucks people have out there on this board. I was looking at a thread this morning that had pics of peoples trucks and I was really impressed.
Terry.
Grants pass OR isn't all that far from me. A days drive.

Sorry I didn't reply to all.

Weasel; my truck is black saphire mica. 91 GMC colour.

Paul; thank you and I'll try my best to answer questions. A bunch of my friends have these trucks also. 1/2 4x4, 3/4 4x4, and both in 2wd. We all help each other so I've seen a bit.

68chevC10; I'll get some pics of the engine as soon as I learn how to post them in a smaller size. With help from Pont, I should get on track. I will help anyone, I have no secrets.

cruzman8 · 10-29-2002, 07:12 PM

Welcome from western NC

Terry'sToy · 10-29-2002, 07:21 PM

I'm off to get new tires for my truck. 30x9.5x15. I'll be back in a few hours. Later.

wrathchild · 10-29-2002, 07:24 PM

Another welcome from Michigan !!!

DanoDMano · 10-29-2002, 07:33 PM

Welcome from beautiful Puyallup, washington!!

Terry'sToy · 10-29-2002, 07:38 PM

Actually I'm not off to get tires for an hour so I'll reply.

cruzman8, wrathchild,DanoDMano. Thanks; DanoDMano Puyallup is only a short ferry ride for me, or you. Wanna come to victoria?

72MARIO · 10-29-2002, 07:52 PM

Welcome

Pont · 10-30-2002, 04:35 AM

Terry, here is the resized pic of your truck. I'm also sending it back to you via email with instructions on how to resize it.

Terry'sToy · 10-30-2002, 10:32 AM

Awesome, thank you. I'll get moving on more pics now.

yellowgmc · 10-30-2002, 12:20 PM

welcome from minnesota! is that a chrome windsheild cowl on you truck?

lpaine · 10-30-2002, 03:43 PM

Welcome from up the road in Qualicum Beach. Always good to see someone local on here. LPaine

Terry'sToy · 10-30-2002, 04:03 PM

yellowgmc; thanks. Yes it is a chrome cowl. My father had it chromed for me as a christmas present 12 years ago. I still like it and it makes the truck just a bit different. I've seen a few over the years.

lpaine. Howdy and thanks. You may see this truck up your neck of the woods with a 9 foot camper on it.

kpf · 10-30-2002, 06:17 PM

welcome from sw washington,

Good looking truck

SNOOP · 10-30-2002, 06:48 PM

WELCOME TO THE BOARD FROM TENN.

Stepside · 10-30-2002, 06:48 PM

Now that's a straight truck! Awesome! And, another welcome from NC.

Terry'sToy · 10-31-2002, 12:33 AM

kpf, SNOOP and stepside. Thanks for the welcome and the nice comments on my truck.

wHATANERD · 05-06-2003, 03:09 PM

Another Welcome from Texas, Nice truck!!

griesel72 · 05-06-2003, 03:23 PM

Welcome from the middle of the US, Kansas

David

dion · 05-06-2003, 03:29 PM

Welcome from San Diego! Sweet rig.

*dtlilly* · 05-06-2003, 03:50 PM

Well, since this old thread was brought up, and I wasn't even a member yet in October of 2002, I will say hello, welcome, and nice looking GMC. Not many trucks get away with black, but yours sure does.

67cst · 05-06-2003, 04:43 PM

welcome from kelowna, you should come up this summer, tons of good car shows

Riveted1 · 05-06-2003, 05:47 PM

Wow, how did this old post get dug-up?! Someone trying to get their hundred posts?

That's ok.... me 2! That is a nice truck though. Black is soooo hard to get away with. Ever get blinded by the sun reflecting off of the chrome cowl?

10-29-2002, 11:43 AM	#26
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Welcome From Virginia __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

10-29-2002, 06:25 PM	#27
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Terry'sToy email your pic to me and I'll resize it for you. It will be later tonight when I get home but I will do it as soon as I walk in the door. pont1@rvi.net __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

10-29-2002, 06:58 PM	#28
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	Awesome. It's on its way. I have lots of pics, plus I would like to post some pics of the TBI setup for those that have asked, so If you could tell me how to do this I would appreciate it. Thank you. Terry. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

10-29-2002, 07:11 PM	#29
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	Pont. Man that is a nice truck. wanna sell it. Just kidding. Send me a pic of it also if you like. I also can't believe all the beautiful trucks people have out there on this board. I was looking at a thread this morning that had pics of peoples trucks and I was really impressed. Terry. Grants pass OR isn't all that far from me. A days drive. Sorry I didn't reply to all. Weasel; my truck is black saphire mica. 91 GMC colour. Paul; thank you and I'll try my best to answer questions. A bunch of my friends have these trucks also. 1/2 4x4, 3/4 4x4, and both in 2wd. We all help each other so I've seen a bit. 68chevC10; I'll get some pics of the engine as soon as I learn how to post them in a smaller size. With help from Pont, I should get on track. I will help anyone, I have no secrets. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

10-29-2002, 07:12 PM	#30
cruzman8 Registered User Join Date: Sep 2002 Location: Morganton,North Carolina Posts: 69	Welcome from western NC __________________ Cruzman

10-29-2002, 07:21 PM	#31
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	I'm off to get new tires for my truck. 30x9.5x15. I'll be back in a few hours. Later. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

10-29-2002, 07:24 PM	#32
wrathchild LIKE 'EM BIG AND TOPLESS Join Date: Dec 2000 Location: Frederic,Michigan Posts: 596	Another welcome from Michigan !!!

10-29-2002, 07:33 PM	#33
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Welcome from beautiful Puyallup, washington!! __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

10-29-2002, 07:38 PM	#34
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	Actually I'm not off to get tires for an hour so I'll reply. cruzman8, wrathchild,DanoDMano. Thanks; DanoDMano Puyallup is only a short ferry ride for me, or you. Wanna come to victoria? __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

10-29-2002, 07:52 PM	#35
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Welcome __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

10-30-2002, 04:35 AM	#36
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	Terry, here is the resized pic of your truck. I'm also sending it back to you via email with instructions on how to resize it. Attached Images __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"

10-30-2002, 10:32 AM	#37
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	Awesome, thank you. I'll get moving on more pics now. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

10-30-2002, 12:20 PM	#38
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	welcome from minnesota! is that a chrome windsheild cowl on you truck? __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

10-30-2002, 03:43 PM	#39
lpaine Registered User Join Date: Oct 2002 Location: Parksville, B.C. Canada Posts: 637	welcome Welcome from up the road in Qualicum Beach. Always good to see someone local on here. LPaine __________________ 1969 G.M.C 3/4 Ton 920 (Canadian Version) 307 3 speed, currently apart 1998 Chevy 1/2 ton ex cab V-6 5 speed 1967 Chevy SWB - project truck; not started just yet

10-30-2002, 04:03 PM	#40
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	yellowgmc; thanks. Yes it is a chrome cowl. My father had it chromed for me as a christmas present 12 years ago. I still like it and it makes the truck just a bit different. I've seen a few over the years. lpaine. Howdy and thanks. You may see this truck up your neck of the woods with a 9 foot camper on it. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's



Register or Log In To remove these advertisements.

10-30-2002, 06:17 PM	#41
kpf Registered User Join Date: Jun 2002 Location: Camas, Wa Posts: 58	welcome from sw washington, Good looking truck __________________ 71 c-10 6cyl 68 Camaro (wifes) 65 dodge town wagon (wanna buy it?) 97 crew cab f350 psd

10-30-2002, 06:48 PM	#42
SNOOP Registered User Join Date: Oct 2002 Location: ROGERSVILLE,TN. Posts: 47	WELCOME TO THE BOARD FROM TENN. __________________ 1968 GMC FLEETSIDE

10-30-2002, 06:48 PM	#43
Stepside Gasser Join Date: May 2000 Location: Thomasville,NC USA Posts: 456	Now that's a straight truck! Awesome! And, another welcome from NC. __________________ :thud 70 sstep tubbed, Muncie, double hump, snowflake,

10-31-2002, 12:33 AM	#44
Terry'sToy Registered User Join Date: Oct 2002 Location: Victoria B.C Posts: 109	kpf, SNOOP and stepside. Thanks for the welcome and the nice comments on my truck. __________________ 69 GMC 1/2 ton lwb, LS1, headers X-pipe 4L60E Yank 3500 stall 3.73 w/eaton brute force. moroso trick front springs,jeep rear springs, QA1's

05-06-2003, 03:09 PM	#45
wHATANERD Registered User Join Date: Mar 2003 Location: Uvalde, Tx Posts: 407	Another Welcome from Texas, Nice truck!! __________________ 1969 C/10 Longbed undergoing rebuild. Old Chevy's Never Die, They Just Rust Around The Edges

05-06-2003, 03:23 PM	#46
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Welcome from the middle of the US, Kansas David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 03:29 PM	#47
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Welcome from San Diego! Sweet rig. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

05-06-2003, 03:50 PM	#48
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Well, since this old thread was brought up, and I wasn't even a member yet in October of 2002, I will say hello, welcome, and nice looking GMC. Not many trucks get away with black, but yours sure does.

05-06-2003, 04:43 PM	#49
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	welcome from kelowna, you should come up this summer, tons of good car shows __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

05-06-2003, 05:47 PM	#50
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Wow, how did this old post get dug-up?! Someone trying to get their hundred posts? That's ok.... me 2! That is a nice truck though. Black is soooo hard to get away with. Ever get blinded by the sun reflecting off of the chrome cowl? __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

Register or Log In To remove these advertisements.