'68 GMC and '72 C10 parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HavinSomeFun · 01-29-2008, 11:57 AM

Quote:

Originally Posted by 68GMCCustom

This is one I'm afraid to ship because I'm afraid it won't arrive in the same condition it is now, and I don't want to be responsible for shipping issues. Plus I don't know how to package it. PM me if you want to take responsibility and I'll let you define the packaging and shipping instructions.

I understand. I'm not sure either. I'll pass for now.

71 super · 01-29-2008, 04:18 PM

I will take the new 72 headlight bezels. Are they after market or GM? I will PM for info.

eightbanger · 01-29-2008, 07:13 PM

Quote:

Originally Posted by 68GMCCustom

spring pops right out. it's about 2.5" long when removed.
Here are pics

Looks like I could find any spring of that type and it would work...thanks for taking the time 68GMCCustom to do those pics.

**70STOVEBOLT** · 01-30-2008, 05:45 AM

How much for the vent shades shipped to 46562, business address? Also, are they stainless steel?

Thanks,
Stovebolt

Zumo · 01-31-2008, 06:18 AM

Still have the window shades? and how about a brake booster?

Cyclone44 · 02-05-2008, 02:03 PM

I PM'ed twice on the marker light shipping cost and address to send money order to....Hope everything is ok.....George

dazza · 02-06-2008, 04:12 AM

In regards to the '72 headlight bezels....
Still available?
Original GM or repro?
Will you ship 'em (payapal)

Thanks

68GMCCustom · 02-08-2008, 01:09 PM

sorry guys....been off line for a while. I'll follow up on everything with everyone tomorrow, when I have a chance to get caught up a little. thanks!

68GMCCustom · 02-09-2008, 08:55 AM

Quote:

Originally Posted by 70STOVEBOLT

How much for the vent shades shipped to 46562, business address? Also, are they stainless steel?

Thanks,
Stovebolt

How about $6.50? And yes, I beleive they are stainless.

68GMCCustom · 02-09-2008, 08:55 AM

Quote:

Originally Posted by dazza

In regards to the '72 headlight bezels....
Still available?
Original GM or repro?
Will you ship 'em (payapal)

Thanks

I can put you in line, but they are already spoken for unless it falls through.

Cyclone44 · 02-10-2008, 10:29 AM

I sent your money order out today on the marker lights...Thanks George

68GMCCustom · 02-10-2008, 02:24 PM

Thanks George. I'll get them ready to go out.

**70STOVEBOLT** · 02-11-2008, 01:15 AM

Quote:

Originally Posted by 68GMCCustom

How about $6.50? And yes, I beleive they are stainless.

Is that $6.50 total or $11.50 total? Also, do you take paypal?

Thanks,
Mark

68GMCCustom · 02-11-2008, 03:33 AM

yes, I take paypal. PM me for addy.
And it's $6.50 total....I don't pad the bill with S&H.

copywritten · 02-13-2008, 01:20 AM

I would like to purchase the parking lamp assembleys from you. Please let me know how to go about doing so. Thank you.

68GMCCustom · 02-13-2008, 04:47 AM

PM'd you.

68GMCCustom · 02-15-2008, 04:08 AM

everything that has been paid for, has shipped.
there's still lots of stuff left tho....don't miss the added items further down page 1.

**lawest** · 02-15-2008, 06:59 AM

I'll take the radiator brackets, and am interested in the shroud if the other deal falls thru. Larry

68GMCCustom · 02-15-2008, 12:38 PM

other deal? as far as I know the shroud's available?....I was just trying to sell it as a set, hoses and all. Radiator brackets are yours for $10 + the trip (which from my recent experiences collecting $1.50-$5.00 for, has actually averaged around $6.20

).

Cyclone44 · 02-16-2008, 05:21 AM

set of 2 amber/ 2 red side markers (1 w/gray/ 3 w/black
trim) sold

I wish you would have told me that one was missing the chrome loop and one had a bent loop...And you said 1 was gray and 3 black....And 3 were gray and 1 was black.. so I will just toss them. Thanks anyway....George

68GMCCustom · 02-16-2008, 06:58 AM

My apologies George but I don't think you need to "toss them".
You could have handled this with a PM though....but you didn't....obviously feeling a need to "call me out" on it here in the forum. So here ya go....

I may have made a mistake listing them and if so, I'm truly sorry. In my defense though...(besides the fact that I am on disability for spinal issues and on numerous pain/muscle medications making it hard to think) I posted a reasonably large, clear pic, and its clear to me that one side marker is black and missing the trim while the other 3 are grey. If you would have asked to claify the details on them before your purchase I would have been more then happy to do so for you. I did not intentionally list any item incorrectly, but if I had meant to mislead I wouldn't have posted as large of pic of the items nor would I have lost on shipping getting it to the buyer.

You're out $12 and you're obviously not happy with your purchase. I'm not sure what you expected to get for $10 for both the complete front and rear assembly pairs, plus only $2 shipping......but you got exactly what I displayed, but unfortunately mis-listed.

So here's the deal....I'm out the 4 lights + $6.20 for shipping (of which I charged you only $2 for) and only collected $12 total leaving me with $5.80 for 4 side marker assemblies (or 42% less then I listed them for). I'm not complaining...just making a point that I obviously wasn't out to screw you.
What would you like me to do? I will be happy to return your money to you, if you will return my parts back to me. I don't know what else I can do for you.

I stated from the beginning that I did not want to ship the items (for reasons like this, and because I'm medicated and might make a mistake)....but that's all anyone here wanted me to do. I was just trying to help the folks here out... and naturally it blows up in my face.

Kurt

Cyclone44 · 02-16-2008, 07:09 AM

I wasn't trying to call you out, just telling you about this matter I'm not mad about it, If $12.00 hurts me I'm in bad shape, I was just hoping to get three light's that I could use...in all honesty I didn't see that loop missing in the pic...no need to refund anything, I do think it's a stand up thing for you to offer though, I don't think of you as a cheat...Matter closed as far as I'm concered...George

**lawest** · 02-16-2008, 08:13 AM

Quote:

Originally Posted by southern parts

how much for the fan shroud shipped to ellenwood ga 30294 thanks, Woody

I was referring to the above post regarding the shroud. I was also only interested in the shroud and not the other stuff, but Woody is ahead of me. Thanks anyway, I'll pass on all of it.

68GMCCustom · 02-16-2008, 11:15 AM

Thanks George. I appreciate it.

I must have missed Woody's post lawest.... and he hasn't asked again so I wasn't aware...but if you are no longer interested, n/p.

**70STOVEBOLT** · 02-22-2008, 08:01 PM

Ventshades arrived yesterday, look great. Thanks for the great deal.

01-29-2008, 04:18 PM	#27
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: '68 GMC and '72 C10 parts I will take the new 72 headlight bezels. Are they after market or GM? I will PM for info.

01-30-2008, 05:45 AM	#29
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: '68 GMC and '72 C10 parts How much for the vent shades shipped to 46562, business address? Also, are they stainless steel? Thanks, Stovebolt __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

01-31-2008, 06:18 AM	#30
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: '68 GMC and '72 C10 parts Still have the window shades? and how about a brake booster? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

02-05-2008, 02:03 PM	#31
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC and '72 C10 parts I PM'ed twice on the marker light shipping cost and address to send money order to....Hope everything is ok.....George

02-06-2008, 04:12 AM	#32
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: '68 GMC and '72 C10 parts In regards to the '72 headlight bezels.... Still available? Original GM or repro? Will you ship 'em (payapal) Thanks __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

02-08-2008, 01:09 PM	#33
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts sorry guys....been off line for a while. I'll follow up on everything with everyone tomorrow, when I have a chance to get caught up a little. thanks! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-10-2008, 10:29 AM	#36
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC and '72 C10 parts I sent your money order out today on the marker lights...Thanks George

02-10-2008, 02:24 PM	#37
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts Thanks George. I'll get them ready to go out. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-11-2008, 03:33 AM	#39
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts yes, I take paypal. PM me for addy. And it's $6.50 total....I don't pad the bill with S&H. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-13-2008, 01:20 AM	#40
copywritten CopyWritten Join Date: Dec 2007 Location: Cypress TX Posts: 173	Re: '68 GMC and '72 C10 parts I would like to purchase the parking lamp assembleys from you. Please let me know how to go about doing so. Thank you.

02-13-2008, 04:47 AM	#41
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts PM'd you. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-15-2008, 04:08 AM	#42
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts everything that has been paid for, has shipped. there's still lots of stuff left tho....don't miss the added items further down page 1. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-15-2008, 06:59 AM	#43
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: '68 GMC and '72 C10 parts I'll take the radiator brackets, and am interested in the shroud if the other deal falls thru. Larry __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

02-15-2008, 12:38 PM	#44
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts other deal? as far as I know the shroud's available?....I was just trying to sell it as a set, hoses and all. Radiator brackets are yours for $10 + the trip (which from my recent experiences collecting $1.50-$5.00 for, has actually averaged around $6.20 ). __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-16-2008, 05:21 AM	#45
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC and '72 C10 parts set of 2 amber/ 2 red side markers (1 w/gray/ 3 w/black trim) sold I wish you would have told me that one was missing the chrome loop and one had a bent loop...And you said 1 was gray and 3 black....And 3 were gray and 1 was black.. so I will just toss them. Thanks anyway....George



Register or Log In To remove these advertisements.

02-16-2008, 06:58 AM	#46
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts My apologies George but I don't think you need to "toss them". You could have handled this with a PM though....but you didn't....obviously feeling a need to "call me out" on it here in the forum. So here ya go.... I may have made a mistake listing them and if so, I'm truly sorry. In my defense though...(besides the fact that I am on disability for spinal issues and on numerous pain/muscle medications making it hard to think) I posted a reasonably large, clear pic, and its clear to me that one side marker is black and missing the trim while the other 3 are grey. If you would have asked to claify the details on them before your purchase I would have been more then happy to do so for you. I did not intentionally list any item incorrectly, but if I had meant to mislead I wouldn't have posted as large of pic of the items nor would I have lost on shipping getting it to the buyer. You're out $12 and you're obviously not happy with your purchase. I'm not sure what you expected to get for $10 for both the complete front and rear assembly pairs, plus only $2 shipping......but you got exactly what I displayed, but unfortunately mis-listed. So here's the deal....I'm out the 4 lights + $6.20 for shipping (of which I charged you only $2 for) and only collected $12 total leaving me with $5.80 for 4 side marker assemblies (or 42% less then I listed them for). I'm not complaining...just making a point that I obviously wasn't out to screw you. What would you like me to do? I will be happy to return your money to you, if you will return my parts back to me. I don't know what else I can do for you. I stated from the beginning that I did not want to ship the items (for reasons like this, and because I'm medicated and might make a mistake)....but that's all anyone here wanted me to do. I was just trying to help the folks here out... and naturally it blows up in my face. Kurt __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 02-16-2008 at 07:00 AM.

02-16-2008, 07:09 AM	#47
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: '68 GMC and '72 C10 parts I wasn't trying to call you out, just telling you about this matter I'm not mad about it, If $12.00 hurts me I'm in bad shape, I was just hoping to get three light's that I could use...in all honesty I didn't see that loop missing in the pic...no need to refund anything, I do think it's a stand up thing for you to offer though, I don't think of you as a cheat...Matter closed as far as I'm concered...George

02-16-2008, 11:15 AM	#49
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: '68 GMC and '72 C10 parts Thanks George. I appreciate it. I must have missed Woody's post lawest.... and he hasn't asked again so I wasn't aware...but if you are no longer interested, n/p. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

02-22-2008, 08:01 PM	#50
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,233	Re: '68 GMC and '72 C10 parts Ventshades arrived yesterday, look great. Thanks for the great deal. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.