OH WTB Mint-BB Air Cleaner Assembly - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70cst** · 03-30-2010, 07:06 PM

Quote:

Originally Posted by JPSAUTO

This is what you will have a hard time finding as 71 Super said. I looked for 2 years. The one in the pic I sold on Ebay. Good Luck

Ok questions for all you experts which I am not...

Was the Air Cleaner-Stove Pipe-Manifold Shield set up the same for a BB in 1970 verses the 71-72 model years or were they different? Was the Manifold Shield used in 1970???
Thanks in advance.

**leddzepp** · 03-30-2010, 07:49 PM

Quote:

Originally Posted by 70cst

Ok questions for all you experts which I am not...

Was the Air Cleaner-Stove Pipe-Manifold Shield set up the same for a BB in 1970 verses the 71-72 model years or were they different? Was the Manifold Shield used in 1970???
Thanks in advance.

Yes they are all the same on all big block trucks.

**70cst** · 03-30-2010, 07:53 PM

Quote:

Originally Posted by leddzepp

Yes they are all the same on all big block trucks.

Thanks...
You show wisdom beyond your years!!

**leddzepp** · 04-01-2010, 02:46 AM

Here are some pics of how it is set up for reference. Two bolts hold the stove to the manifold, and a small screw anchors the pipe base to the stove. The pipe fits up under the air cleaner. It normally sits flush, but I have a carb plate at the base of the intake manifold which pushes the air cleaner up a bit. I have both the BBC and SBC factory setups on my trucks, and the BBC setup actually "fits" better and a lot more snug than the SBC setup...IMO the BBC stove is designed better for the shape of the exhaust manifold. The air cleaner spacer is the same height on both SBC and BBC setups. Bump for ya.

**70cst** · 04-01-2010, 07:48 AM

Quote:

Originally Posted by leddzepp

Here are some pics of how it is set up for reference. Two bolts hold the stove to the manifold, and a small screw anchors the pipe base to the stove. The pipe fits up under the air cleaner. It normally sits flush, but I have a carb plate at the base of the intake manifold which pushes the air cleaner up a bit. I have both the BBC and SBC factory setups on my trucks, and the BBC setup actually "fits" better and a lot more snug than the SBC setup...IMO the BBC stove is designed better for the shape of the exhaust manifold. The air cleaner spacer is the same height on both SBC and BBC setups. Bump for ya.

Thanks for the pics!!

**70cst** · 04-02-2010, 04:06 PM

BTTT or Back To The Top

1968SWBBigBlock · 04-03-2010, 06:17 PM

buckeye to the top

04-01-2010, 02:46 AM	#29
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,990	Re: WTB Mint-BB Air Cleaner Assembly Here are some pics of how it is set up for reference. Two bolts hold the stove to the manifold, and a small screw anchors the pipe base to the stove. The pipe fits up under the air cleaner. It normally sits flush, but I have a carb plate at the base of the intake manifold which pushes the air cleaner up a bit. I have both the BBC and SBC factory setups on my trucks, and the BBC setup actually "fits" better and a lot more snug than the SBC setup...IMO the BBC stove is designed better for the shape of the exhaust manifold. The air cleaner spacer is the same height on both SBC and BBC setups. Bump for ya. Attached Images __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

04-02-2010, 04:06 PM	#31
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,356	Re: WTB Mint-BB Air Cleaner Assembly BTTT or Back To The Top __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-03-2010, 06:17 PM	#32
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: WTB Mint-BB Air Cleaner Assembly buckeye to the top __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.