Harnalien's Build Thread - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*nbpro* · 12-20-2010, 02:41 AM

Looks sweet

Devillusion · 12-20-2010, 01:54 PM

very nice.....

**Clyde65** · 12-31-2010, 12:09 PM

I had an 85 with the 29 Midnight Blue in and out, man I loved that truck and color, I also love the white on yours, great looking truck.

harnalien · 01-01-2011, 12:40 AM

Thanks a lot everyone! Here are a few more. Not much difference, just slowly getting it back together.

harnalien · 01-22-2011, 06:54 PM

Finally got it back. Still need to put on trim (next week) and clean it up a little. I like it a lot!

harnalien · 02-01-2011, 12:31 AM

I got my 6.0 today. It's an '04 w/ 80K. I got a DBC throttle body and a computer for an '02 since I'll be running 700r4 with it. Obviously, this was a big step towards making the swap.

harnalien · 02-09-2011, 02:26 PM

I got the valve springs, pushrods, and all the gaskets for the cam swap. Hopefully I'll be able to get that done next week.

harnalien · 02-20-2011, 11:55 AM

Pics of the truck after a wash and of some more of the parts I'm collecting. Seems like it's a never ending list.

harnalien · 02-20-2011, 12:00 PM

Does anyone know if a gasket goes between the block and the oil bypass cover? If so, where can I get that from? Thanks!

Gordonr1973 · 02-20-2011, 06:07 PM

Look here:

http://www.pleasurecraft.com/manuals/L510016.pdf

you could order from:

Gmpartsdirect.com

Gmpartsgiant.com

usmcchevy · 02-24-2011, 11:06 PM

Quote:

Originally Posted by harnalien

Does anyone know if a gasket goes between the block and the oil bypass cover? If so, where can I get that from? Thanks!

Autozone CAN order it. I just got one from them.

harnalien · 02-25-2011, 12:43 AM

Thanks guys! I actually found it, part # 12611384. I had some other stuff to order, so I threw that one in. Some of this stuff is a pain in the rear to find part numbers for. Anyway, I figure i'd post some pics of my harness i got from psiconversion.

silvereagle07 · 02-25-2011, 06:46 PM

Sweet build!

73gmc454 · 02-25-2011, 10:12 PM

Cool build ! The mods never stop !

harnalien · 04-11-2011, 06:01 PM

Getting close.

my4by2 · 04-11-2011, 07:47 PM

Man what a sweet lookin' truck!!! Gonna be great with that 6.0L in there too!!! Keep the pics coming!

harnalien · 04-23-2011, 09:42 PM

Thanks buddy! I got my Schoenfeld headers in today and got to mock up the driver's side and it looks promising. I should be able to try the passenger side on Monday. I am really hoping they work out! I'll get some progress pics up next week.

mooseknuckles · 04-23-2011, 10:06 PM

swet truck man!....about to get even better!

poppa21 · 05-04-2011, 07:52 PM

Quote:

Originally Posted by harnalien

Finally got it back. Still need to put on trim (next week) and clean it up a little. I like it a lot!

what rear brackets you use for the bumper. I have one, but, I cant figure out if the diamond plated bumper brackets will work. I've searched online for brackets but I'm not sure which ones to order. Please help. Thanks!

menace121978 · 05-04-2011, 08:46 PM

sweet build dude! keep plugging away

harnalien · 05-05-2011, 06:16 PM

Quote:

Originally Posted by poppa21

what rear brackets you use for the bumper. I have one, but, I cant figure out if the diamond plated bumper brackets will work. I've searched online for brackets but I'm not sure which ones to order. Please help. Thanks!

I just went to the junk yard and got some. You can order the replacement brackets from classic parts though. oh yeah, i'm just using the the outer brackets.

Quote:

Originally Posted by menace121978

sweet build dude! keep plugging away

thanks! trying to get it put together but the people i have enlisted to help won't come through for me! i've never had this much trouble giving away money, lol!

poppa21 · 05-05-2011, 07:40 PM

Thanks. I'll undo my bumper and just use the outer brackets. Thanks! These trucks are the best.
Posted via Mobile Device

spudz · 05-05-2011, 09:05 PM

Very nice!!!!!

harnalien · 07-06-2011, 04:59 PM

Well, it's been one disaster after the other, but I truly am getting close! I actually drove it around. It still needs some fine tuning and the exhaust needs to be done. I couldn't get on it because I still need to get the tranny dialed in. Sounds mean though. Exhaust guys coming out to the house on Monday, so hopefully I'll be rolling after that!

Pop's C-10 · 07-07-2011, 10:23 AM

Are you running a elec. fan..if so you can lose tha shroud, cause you not brething good air like that

View Poll Results: TH400 or 4l80E
Get a 4l80e	58	76.32%
Get a TH400	18	23.68%
Voters: 76. You may not vote on this poll

12-20-2010, 02:41 AM	#26
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: Harnalien's Build Thread Looks sweet

12-20-2010, 01:54 PM	#27
Devillusion Registered User Join Date: Jan 2010 Location: Brandon, Manitoba, Canada Posts: 782	Re: Harnalien's Build Thread very nice..... __________________ 1967 K30 4x4/12v Cummins/getrag/D60/D70/355s 1967 GMC suburban 4x4/LS swap 5.3/4500/205/10 bolt/14 bolt full floater 1963 C10 reg cab long box 1970 Chevelle 1968 Biscayne 2dr post "...there is no excuse for what I am about to do, but dangit....it's gonna be fun!"

12-31-2010, 12:09 PM	#28
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Harnalien's Build Thread I had an 85 with the 29 Midnight Blue in and out, man I loved that truck and color, I also love the white on yours, great looking truck. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-01-2011, 12:40 AM	#29
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Thanks a lot everyone! Here are a few more. Not much difference, just slowly getting it back together. Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

01-22-2011, 06:54 PM	#30
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Finally got it back. Still need to put on trim (next week) and clean it up a little. I like it a lot! Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-01-2011, 12:31 AM	#31
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread I got my 6.0 today. It's an '04 w/ 80K. I got a DBC throttle body and a computer for an '02 since I'll be running 700r4 with it. Obviously, this was a big step towards making the swap. Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-09-2011, 02:26 PM	#32
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread I got the valve springs, pushrods, and all the gaskets for the cam swap. Hopefully I'll be able to get that done next week. __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-20-2011, 11:55 AM	#33
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Pics of the truck after a wash and of some more of the parts I'm collecting. Seems like it's a never ending list. Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-20-2011, 12:00 PM	#34
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Does anyone know if a gasket goes between the block and the oil bypass cover? If so, where can I get that from? Thanks! __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-20-2011, 06:07 PM	#35
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: Harnalien's Build Thread Look here: http://www.pleasurecraft.com/manuals/L510016.pdf you could order from: Gmpartsdirect.com Gmpartsgiant.com __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

02-25-2011, 12:43 AM	#37
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Thanks guys! I actually found it, part # 12611384. I had some other stuff to order, so I threw that one in. Some of this stuff is a pain in the rear to find part numbers for. Anyway, I figure i'd post some pics of my harness i got from psiconversion. Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

02-25-2011, 06:46 PM	#38
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Harnalien's Build Thread Sweet build! __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

02-25-2011, 10:12 PM	#39
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: Harnalien's Build Thread Cool build ! The mods never stop ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

04-11-2011, 06:01 PM	#40
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Getting close. Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595



Register or Log In To remove these advertisements.

04-11-2011, 07:47 PM	#41
my4by2 Registered User Join Date: Dec 2010 Location: Hot Springs, AR. Posts: 1,215	Re: Harnalien's Build Thread Man what a sweet lookin' truck!!! Gonna be great with that 6.0L in there too!!! Keep the pics coming! __________________ 1977 Chevrolet K30 LWB Crew Cab 497HP Mast Motorsports 6.0L LY6 HO engine GM NV4500 5-speed, Centerforce clutch + NP205 D60 + 14-bolt FF w/ Eaton posi + disc brakes Skyjacker 2.5" full spring lift w/ Nitro shocks Custom paint + interior http://67-72chevytrucks.com/vboard/s...d.php?t=435722

04-23-2011, 09:42 PM	#42
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Thanks buddy! I got my Schoenfeld headers in today and got to mock up the driver's side and it looks promising. I should be able to try the passenger side on Monday. I am really hoping they work out! I'll get some progress pics up next week. __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

04-23-2011, 10:06 PM	#43
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Harnalien's Build Thread swet truck man!....about to get even better! __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

05-04-2011, 08:46 PM	#45
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Harnalien's Build Thread sweet build dude! keep plugging away __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

05-05-2011, 07:40 PM	#47
poppa21 Registered User Join Date: Dec 2009 Location: Tacoma, WA Posts: 14	Re: Harnalien's Build Thread Thanks. I'll undo my bumper and just use the outer brackets. Thanks! These trucks are the best. Posted via Mobile Device

05-05-2011, 09:05 PM	#48
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Harnalien's Build Thread Very nice!!!!! __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

07-06-2011, 04:59 PM	#49
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Harnalien's Build Thread Well, it's been one disaster after the other, but I truly am getting close! I actually drove it around. It still needs some fine tuning and the exhaust needs to be done. I couldn't get on it because I still need to get the tranny dialed in. Sounds mean though. Exhaust guys coming out to the house on Monday, so hopefully I'll be rolling after that! Attached Images __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

07-07-2011, 10:23 AM	#50
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Harnalien's Build Thread Are you running a elec. fan..if so you can lose tha shroud, cause you not brething good air like that __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

Register or Log In To remove these advertisements.