Skunkswifes 55 chevy - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nastyc10 · 03-30-2011, 01:17 AM

Sweet ride!

rhodog77 · 03-30-2011, 05:14 PM

great lookin ride. love the stance. where did you pick up the centercaps from??

Bishops Trucks · 03-30-2011, 05:31 PM

Very nice, I like the patina.

skunkwerx · 03-30-2011, 09:23 PM

Thanks , got them from a store in okc, called massy's. I think they have an eBay store
Posted via Mobile Device

rhodog77 · 04-03-2011, 10:37 PM

skunkwerx,

I spoke with massey's and got the link to their ebay store. I measured my center bore and it came out to 2.95". they sell a set but at the very bottom of the page it says that they will not fit OE rims. It does lists a bunch of different aftermarket wheels. My question is what kind of rims are you running, they look stock OE.

thanks again for the lead. They are the only ones that I could find with the smaller bore (2.95")

brian

skunkwerx · 04-04-2011, 08:30 AM

The wheels r from Early Wheel Company, they r fairly cheap,& u get to pick ur width and back space.
Posted via Mobile Device

Flames97 · 04-04-2011, 11:15 PM

Dang, that is a nice find. I really like what you did with it. Simple, slam it and just drive it, Definetly a cool factor there. Nice work

pipty6 · 04-05-2011, 02:52 PM

Do you have more pictures of the rear suspension setup?

rhodog77 · 04-06-2011, 10:12 PM

Skunkwerks,

Thanks again for the lead. I ordered up the bullet centers from massey's ebay store. They were very good to work with. I got them today and I am very satisfied with them. I did have to open up the bore just a bit with a die grinder to make them fit but they are exactly what I was looking for. I scored a free set of chrome new lug nuts from my chevy dealership. I threw one to see how it looked....just the look is was going for.

thanks again

brian

skunkwerx · 04-07-2011, 12:11 AM

No prob glad to help u out, and they look great.
Posted via Mobile Device

skunkwerx · 04-07-2011, 12:14 AM

The rear set up is just a two link with a link bar diagonal from one bar to the other,& the bag is mounted on the bars. I'll try post n a pic tomorrow.
Posted via Mobile Device

skunkwerx · 04-12-2011, 10:07 PM

got alittle more done,"the bed"

skunkwerx · 04-12-2011, 10:10 PM

what it ended up looking like

jwalk · 04-12-2011, 10:19 PM

Looks good Mark!!! Are you taking this and your 68 to the show this week end? Tell Nichole that I've got a set of horns that this one needs!

Posted via Mobile Device

skunkwerx · 04-12-2011, 10:40 PM

Thanks, yea I'm gonna try taken both, but seams like everything n the world that could come up,so I can't go is.she already has one but it needs a valve to make it work.
Posted via Mobile Device

Kim57 · 04-12-2011, 11:16 PM

Looking good.
Kim

ratty 46 · 04-12-2011, 11:58 PM

Nice .... very clean looking.

Ratty 46

jwalk · 04-17-2011, 01:34 AM

Here you go!
Name: 046.jpg
Views: 6926
Size: 62.9 KB

skunkswife · 04-17-2011, 10:07 PM

Wow thanks Justin! And thanks Mark for winning me $3,000 at Street Rod Natls.

Posted via Mobile Device

skunkswife · 04-19-2011, 10:02 AM

Quote:

Originally Posted by jwalk

Here you go!
Attachment 734071

I need some help naming this truck, I have a couple of ideas... Any suggestions?
Posted via Mobile Device
Posted via Mobile Device

Woodbutcher · 04-20-2011, 06:41 PM

I'd be tempted to call it C'Rusty... short for Cool and Rusty! Love the truck!

skunkwerx · 04-21-2011, 05:57 PM

new aircleaner,& valve covers

Kim57 · 04-22-2011, 12:22 AM

Those look sweet. I love the finned rocker covers.
Kim

fat56 · 04-30-2011, 09:03 AM

Absolutely love this truck. I am in the progress of bagged my 56 with a camaro front clip and was wondering if you had any photos of your front suspension setup? how the bag is mounted and if you cut/notched the upper arm.. it would be a real help.

Thanks
B.

dicer · 04-30-2011, 07:20 PM

Just wondering why the sheet steel is rusty but the engine isn't? I'd be for stripping the engine and getting some nice rust going on it quick. And the headers too.

03-30-2011, 01:17 AM	#26
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Skunkswifes 55 chevy Sweet ride!

03-30-2011, 05:14 PM	#27
rhodog77 Registered User Join Date: Apr 2002 Location: Burlington, KY USA Posts: 338	Re: Skunkswifes 55 chevy great lookin ride. love the stance. where did you pick up the centercaps from?? __________________ "Get Busy Living or Get Busy Dying" 1970 P10 Stepvan

03-30-2011, 05:31 PM	#28
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: Skunkswifes 55 chevy Very nice, I like the patina. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

03-30-2011, 09:23 PM	#29
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy Thanks , got them from a store in okc, called massy's. I think they have an eBay store Posted via Mobile Device __________________ Skunkwerx

04-03-2011, 10:37 PM	#30
rhodog77 Registered User Join Date: Apr 2002 Location: Burlington, KY USA Posts: 338	Re: Skunkswifes 55 chevy skunkwerx, I spoke with massey's and got the link to their ebay store. I measured my center bore and it came out to 2.95". they sell a set but at the very bottom of the page it says that they will not fit OE rims. It does lists a bunch of different aftermarket wheels. My question is what kind of rims are you running, they look stock OE. thanks again for the lead. They are the only ones that I could find with the smaller bore (2.95") brian __________________ "Get Busy Living or Get Busy Dying" 1970 P10 Stepvan Last edited by rhodog77; 04-03-2011 at 10:38 PM.

04-04-2011, 08:30 AM	#31
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy The wheels r from Early Wheel Company, they r fairly cheap,& u get to pick ur width and back space. Posted via Mobile Device __________________ Skunkwerx

04-04-2011, 11:15 PM	#32
Flames97 Registered User Join Date: Jan 2010 Location: Tonasket, Washington Posts: 316	Re: Skunkswifes 55 chevy Dang, that is a nice find. I really like what you did with it. Simple, slam it and just drive it, Definetly a cool factor there. Nice work __________________ -Aaron '15.5 Chevy Duramax LTZ/Z71, LML, CC/SB '77 Chevy K10, 4" lift, 33-12.50, 350/350 '55 Chevy Short Box (In Pieces)MII,4-link,Bagged,383 Stroker,700r4,3.73posi (SOLD) My 55.2 Chevy 3100 Build

04-05-2011, 02:52 PM	#33
pipty6 Registered User Join Date: May 2009 Location: nor cal Posts: 23	Re: Skunkswifes 55 chevy Do you have more pictures of the rear suspension setup?

04-06-2011, 10:12 PM	#34
rhodog77 Registered User Join Date: Apr 2002 Location: Burlington, KY USA Posts: 338	Re: Skunkswifes 55 chevy Skunkwerks, Thanks again for the lead. I ordered up the bullet centers from massey's ebay store. They were very good to work with. I got them today and I am very satisfied with them. I did have to open up the bore just a bit with a die grinder to make them fit but they are exactly what I was looking for. I scored a free set of chrome new lug nuts from my chevy dealership. I threw one to see how it looked....just the look is was going for. thanks again brian __________________ "Get Busy Living or Get Busy Dying" 1970 P10 Stepvan

04-07-2011, 12:11 AM	#35
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy No prob glad to help u out, and they look great. Posted via Mobile Device __________________ Skunkwerx

04-07-2011, 12:14 AM	#36
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy The rear set up is just a two link with a link bar diagonal from one bar to the other,& the bag is mounted on the bars. I'll try post n a pic tomorrow. Posted via Mobile Device __________________ Skunkwerx

04-12-2011, 10:07 PM	#37
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy got alittle more done,"the bed" Attached Images __________________ Skunkwerx

04-12-2011, 10:10 PM	#38
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy what it ended up looking like Attached Images __________________ Skunkwerx

04-12-2011, 10:19 PM	#39
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Skunkswifes 55 chevy Looks good Mark!!! Are you taking this and your 68 to the show this week end? Tell Nichole that I've got a set of horns that this one needs! Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

04-12-2011, 10:40 PM	#40
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy Thanks, yea I'm gonna try taken both, but seams like everything n the world that could come up,so I can't go is.she already has one but it needs a valve to make it work. Posted via Mobile Device __________________ Skunkwerx



Register or Log In To remove these advertisements.

04-12-2011, 11:16 PM	#41
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: Skunkswifes 55 chevy Looking good. Kim

04-12-2011, 11:58 PM	#42
ratty 46 Registered User Join Date: Jun 2009 Location: Atlanta, Ga. Posts: 1,104	Re: Skunkswifes 55 chevy Nice .... very clean looking. Ratty 46

04-17-2011, 01:34 AM	#43
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Skunkswifes 55 chevy Here you go! __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

04-17-2011, 10:07 PM	#44
skunkswife Registered User Join Date: Feb 2011 Location: Sayre, Ok Posts: 33	Re: Skunkswifes 55 chevy Wow thanks Justin! And thanks Mark for winning me $3,000 at Street Rod Natls. Posted via Mobile Device __________________ Informing other women one black eye at a time

04-20-2011, 06:41 PM	#46
Woodbutcher Registered User Join Date: Nov 2008 Location: Prince George, BC, CAN Posts: 60	Re: Skunkswifes 55 chevy I'd be tempted to call it C'Rusty... short for Cool and Rusty! Love the truck! __________________ If the women don't find you handsome, they should at least find you handy... Red Green Keep your stick on the ice, Woodbutcher

04-21-2011, 05:57 PM	#47
skunkwerx Registered User Join Date: Oct 2006 Location: oklahoma Posts: 238	Re: Skunkswifes 55 chevy new aircleaner,& valve covers Attached Images __________________ Skunkwerx

04-22-2011, 12:22 AM	#48
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: Skunkswifes 55 chevy Those look sweet. I love the finned rocker covers. Kim

04-30-2011, 09:03 AM	#49
fat56 Registered User Join Date: Mar 2011 Location: Sydney AUS Posts: 160	Re: Skunkswifes 55 chevy Absolutely love this truck. I am in the progress of bagged my 56 with a camaro front clip and was wondering if you had any photos of your front suspension setup? how the bag is mounted and if you cut/notched the upper arm.. it would be a real help. Thanks B.

04-30-2011, 07:20 PM	#50
dicer Registered User Join Date: Dec 2010 Location: seattle, wa Posts: 529	Re: Skunkswifes 55 chevy Just wondering why the sheet steel is rusty but the engine isn't? I'd be for stripping the engine and getting some nice rust going on it quick. And the headers too.

Register or Log In To remove these advertisements.