KS 1971 cheyenne super going under the knife now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zoomin · 08-15-2011, 09:43 PM

Inside rear view mirror
Pass side upper door trim
Gas cap

teeitup · 08-15-2011, 10:00 PM

Ryan, if its good its yours, I forgot it had that clip on it

Steve, I'll check condition of those things

Thanks Randy

**blap** · 08-15-2011, 10:13 PM

Interested in the radiatior support , FT L&R inner fenders.engine wiring harness. Tnks

71 super · 08-15-2011, 10:14 PM

Randy is this the truck we spoke about last night with the clutch fan? Shoot me a price for complete unit and any hardware (pump studs, nuts etc.) Also interested in any a/c specific studs for compressor brackets at water pump and cylinder head. Thanks Harold

teeitup · 08-15-2011, 10:31 PM

Brad, I'll check it all out

Harold, this is the truck, sorry rained off and on most the day so didn't get to look at the fan plus I had to haul a couple loads to scrap while the prices are up.

Thanks Randy

**JDL** · 08-15-2011, 11:01 PM

dose it have the seat belts

**lolife99** · 08-15-2011, 11:14 PM

I'll get in line for the the Cheyenne Super glovebox door if you decide to let it go.

Tuff Gong · 08-16-2011, 12:07 AM

Randy,

Interested in the rearview mirror (I think I'm second in line) and oil filler. Pics and prices when you have a moment. By the way, my other parts came, but I missed them. I'll send my wife to the post office tomorrow. Thanks.

Vintage Windmills · 08-16-2011, 12:10 AM

Excuse me sir, How is the cab on this one?

mcbassin · 08-16-2011, 12:58 AM

Are the lower mouldings restorable? How much? thanks

teeitup · 08-16-2011, 06:38 AM

JDL, Jim, It does but I think the pass male is broke, and if I remember right the centers are not original, but I will look again today

Keith, your in line for it

Brian, your in line for mirror and oil filler

Jud, bottom side isn't bad but it has rust above windshield. I still have to go look at this other 71 I'll try to get there this weekend

Mike, I'll check the chrome out

Thanks Randy

72cheyenneman · 08-16-2011, 07:59 AM

How about the radio antenna? Is it OE style telescoping mast or the solid one? If OE style telescoping how much and what kind of condition is it? Like a picture of it if it will clean up in great condition. Thanks Casey

OLEBEATER · 08-16-2011, 08:01 AM

Randy, I'd like to get inline for the a/t crossmember and steering column. Thanks.............

72cheyenneman · 08-16-2011, 08:14 AM

Randy--How how much for the stovepipe & heatshield and hardware? Also sparkplug heatshields and hardware; and I need the sparkplug wire retainers on the right and left side of motor.

yellow70 · 08-16-2011, 08:23 AM

Found pm, sorry, Thanks!!

Vintage Windmills · 08-16-2011, 08:43 AM

Ok Randy, I should wait for something better. Curious to hear if the other 71 pans out.

Jud

teeitup · 08-16-2011, 12:45 PM

72Cheyenneman, Casey, I'll check all that stuff out

Olebeater, your first in line on those 2 items

yellow70, Randell, it only has the outer AC box and a couple of AC brackets. Nothing else underhood for AC

Jud, your first in line on the 71 cab when I get it in. I'm unsure condition, he said just a rocker but you never know till you get there. I have it look at and a b 72 blazer

Thanks Randy

ChevyLvr4Life · 08-16-2011, 03:44 PM

Randy, Interested in washer bottle and bracket if in usable condition and no one else has asked for it. Also does it have or do you have any trico wiper blades. Just need blades got arms. Shipping will be to 24078.
Thanks, James

bguild · 08-16-2011, 05:06 PM

Would you sell the rear inner fender wells. If so how much shipped to KC? Thanks Brian

Zulu · 08-16-2011, 05:19 PM

How much for the upper alternator bracket shipped to 89011
Thx

chase1873 · 08-16-2011, 08:17 PM

Hey there,

I'm in need of a part that will require a bit of work for you get out. You might not want to break the front suspension up, but ill ask any ways.

There is a bracket that attaches the upper A-arm to the crossmember as well as the frame. I'm interested in the passenger side, it should be riveted on.

mike

coast2coast · 08-16-2011, 08:25 PM

Randy, can I get a price on the am radio

teeitup · 08-16-2011, 10:28 PM

ChevyLvr4life, James, I'll check out washer bottle. I have all kinds of original Trico wipers. I'll get pics of stuff Wed

Bguild, Brian, sorry not parting out this bed

Zulu, I sell Alt brackets in sets $31 shipped

Chase1873, Mike, sorry I sell frontends complete locally

coast2coast, this radio with all knobs $36 shipped. I have a nicer faced radio for $51 shipped. I do not know if either work.

Thanks Randy

teeitup · 08-16-2011, 10:31 PM

I'm sorry guys got off work late, then had to do a side job trenching some drainage tile, so I never got to take many pics or look at truck better. I'll try to get more pics Wed and start parting it after work. My kids are starting school tomorrow so hopefully things will calm down around here so I can get to working on this truck. Thanks for your patience, Randy

teeitup · 08-16-2011, 10:36 PM

pic28

08-15-2011, 09:43 PM	#26
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1971 cheyenne super going under the knife now Inside rear view mirror Pass side upper door trim Gas cap __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

08-15-2011, 10:00 PM	#27
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now Ryan, if its good its yours, I forgot it had that clip on it Steve, I'll check condition of those things Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-15-2011, 10:13 PM	#28
blap Senior Member Join Date: Nov 2008 Location: bristol,CT Posts: 579	Re: 1971 cheyenne super going under the knife now Interested in the radiatior support , FT L&R inner fenders.engine wiring harness. Tnks

08-15-2011, 10:14 PM	#29
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: 1971 cheyenne super going under the knife now Randy is this the truck we spoke about last night with the clutch fan? Shoot me a price for complete unit and any hardware (pump studs, nuts etc.) Also interested in any a/c specific studs for compressor brackets at water pump and cylinder head. Thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-15-2011, 10:31 PM	#30
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now Brad, I'll check it all out Harold, this is the truck, sorry rained off and on most the day so didn't get to look at the fan plus I had to haul a couple loads to scrap while the prices are up. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-15-2011, 11:01 PM	#31
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 1971 cheyenne super going under the knife now dose it have the seat belts __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

08-15-2011, 11:14 PM	#32
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: 1971 cheyenne super going under the knife now I'll get in line for the the Cheyenne Super glovebox door if you decide to let it go. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-16-2011, 12:07 AM	#33
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: 1971 cheyenne super going under the knife now Randy, Interested in the rearview mirror (I think I'm second in line) and oil filler. Pics and prices when you have a moment. By the way, my other parts came, but I missed them. I'll send my wife to the post office tomorrow. Thanks.

08-16-2011, 12:10 AM	#34
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1971 cheyenne super going under the knife now Excuse me sir, How is the cab on this one? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-16-2011, 12:58 AM	#35
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1971 cheyenne super going under the knife now Are the lower mouldings restorable? How much? thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-16-2011, 06:38 AM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now JDL, Jim, It does but I think the pass male is broke, and if I remember right the centers are not original, but I will look again today Keith, your in line for it Brian, your in line for mirror and oil filler Jud, bottom side isn't bad but it has rust above windshield. I still have to go look at this other 71 I'll try to get there this weekend Mike, I'll check the chrome out Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-16-2011, 07:59 AM	#37
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: 1971 cheyenne super going under the knife now How about the radio antenna? Is it OE style telescoping mast or the solid one? If OE style telescoping how much and what kind of condition is it? Like a picture of it if it will clean up in great condition. Thanks Casey

08-16-2011, 08:01 AM	#38
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: 1971 cheyenne super going under the knife now Randy, I'd like to get inline for the a/t crossmember and steering column. Thanks.............

08-16-2011, 08:14 AM	#39
72cheyenneman Registered User Join Date: Nov 2009 Location: New Orleans, Louisiana Posts: 610	Re: 1971 cheyenne super going under the knife now Randy--How how much for the stovepipe & heatshield and hardware? Also sparkplug heatshields and hardware; and I need the sparkplug wire retainers on the right and left side of motor.

08-16-2011, 08:23 AM	#40
yellow70 Registered User Join Date: Mar 2006 Location: Heber Springs Arkansas Posts: 117	Re: 1971 cheyenne super going under the knife now Found pm, sorry, Thanks!!



Register or Log In To remove these advertisements.

08-16-2011, 08:43 AM	#41
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 1971 cheyenne super going under the knife now Ok Randy, I should wait for something better. Curious to hear if the other 71 pans out. Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

08-16-2011, 12:45 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now 72Cheyenneman, Casey, I'll check all that stuff out Olebeater, your first in line on those 2 items yellow70, Randell, it only has the outer AC box and a couple of AC brackets. Nothing else underhood for AC Jud, your first in line on the 71 cab when I get it in. I'm unsure condition, he said just a rocker but you never know till you get there. I have it look at and a b 72 blazer Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-16-2011, 03:44 PM	#43
ChevyLvr4Life Registered User Join Date: Aug 2010 Location: Martinsville, VA Posts: 150	Re: 1971 cheyenne super going under the knife now Randy, Interested in washer bottle and bracket if in usable condition and no one else has asked for it. Also does it have or do you have any trico wiper blades. Just need blades got arms. Shipping will be to 24078. Thanks, James __________________ 1970 Chevy C10 LWB 307 3OTT 3.73 gear

08-16-2011, 05:06 PM	#44
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 1971 cheyenne super going under the knife now Would you sell the rear inner fender wells. If so how much shipped to KC? Thanks Brian __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

08-16-2011, 05:19 PM	#45
Zulu Registered User Join Date: May 2009 Location: Henderson, Nv Posts: 21	Re: 1971 cheyenne super going under the knife now How much for the upper alternator bracket shipped to 89011 Thx

08-16-2011, 08:17 PM	#46
chase1873 Registered User Join Date: Jul 2010 Location: Boston, MA Posts: 97	Re: 1971 cheyenne super going under the knife now Hey there, I'm in need of a part that will require a bit of work for you get out. You might not want to break the front suspension up, but ill ask any ways. There is a bracket that attaches the upper A-arm to the crossmember as well as the frame. I'm interested in the passenger side, it should be riveted on. mike Attached Images __________________ Mike 1970 C10 swb step side... needs everything.

08-16-2011, 08:25 PM	#47
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: 1971 cheyenne super going under the knife now Randy, can I get a price on the am radio

08-16-2011, 10:28 PM	#48
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now ChevyLvr4life, James, I'll check out washer bottle. I have all kinds of original Trico wipers. I'll get pics of stuff Wed Bguild, Brian, sorry not parting out this bed Zulu, I sell Alt brackets in sets $31 shipped Chase1873, Mike, sorry I sell frontends complete locally coast2coast, this radio with all knobs $36 shipped. I have a nicer faced radio for $51 shipped. I do not know if either work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-16-2011, 10:31 PM	#49
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now I'm sorry guys got off work late, then had to do a side job trenching some drainage tile, so I never got to take many pics or look at truck better. I'll try to get more pics Wed and start parting it after work. My kids are starting school tomorrow so hopefully things will calm down around here so I can get to working on this truck. Thanks for your patience, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-16-2011, 10:36 PM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1971 cheyenne super going under the knife now pic28 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.