sbc 465 np205 swap to 1965 k10 need help - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jboogee · 01-08-2014, 01:48 AM

Here are some pics of what I've got going on, so does this rearend look stock with non-boltin brake cables?

**argonaut** · 01-08-2014, 02:05 AM

Looking good!
Like you said, just pull out the bellhousing mounts but leave the crossmember.

The rear drum brake backing plates look right to me. You'll have a hard time finding a set of correct parking brake cables if you are using the stock lever setup connected to the old crossmember above the t221 transfer case. There is a small chance that I have my old cables in my big box of spare parts...then again I may have tossed them. If you want them I could dig around for them.

jboogee · 01-08-2014, 02:27 AM

that would be awesome I did find a supplier that was linked on the forum but they said that the brake cables were retained by a bolt and not snap in. What are your thoughts

jboogee · 01-08-2014, 02:33 AM

Also what brake hoses would I use for the 70's front disc axle in my application. And thanks its nickel and diming me to death but coming out great.

01-08-2014, 01:48 AM	#26
jboogee Registered User Join Date: May 2012 Location: pasco,wa Posts: 23	Re: sbc 465 np205 swap to 1965 k10 need help Here are some pics of what I've got going on, so does this rearend look stock with non-boltin brake cables? Attached Images

01-08-2014, 02:05 AM	#27
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: sbc 465 np205 swap to 1965 k10 need help Looking good! Like you said, just pull out the bellhousing mounts but leave the crossmember. The rear drum brake backing plates look right to me. You'll have a hard time finding a set of correct parking brake cables if you are using the stock lever setup connected to the old crossmember above the t221 transfer case. There is a small chance that I have my old cables in my big box of spare parts...then again I may have tossed them. If you want them I could dig around for them. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

01-08-2014, 02:27 AM	#28
jboogee Registered User Join Date: May 2012 Location: pasco,wa Posts: 23	Re: sbc 465 np205 swap to 1965 k10 need help that would be awesome I did find a supplier that was linked on the forum but they said that the brake cables were retained by a bolt and not snap in. What are your thoughts

01-08-2014, 02:33 AM	#29
jboogee Registered User Join Date: May 2012 Location: pasco,wa Posts: 23	Re: sbc 465 np205 swap to 1965 k10 need help Also what brake hoses would I use for the 70's front disc axle in my application. And thanks its nickel and diming me to death but coming out great.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.